Thingiverse
4xHDD NAS ITX by Ren_Dev
by Thingiverse
Last crawled date: 4 years, 11 months ago
I am print this:
HDD* details ABS or PETG.
salazka10mm and stand TPU.
Other details PLA.
I spent about 1kg of plastic
For cooling use 120mm or 140mm fan.
Use M3 screws and nuts.
Multiple screws M3-10mm, M3-16mm, M3-20mm for case.
And long 3xM3-25mm for Front_Panel.
I used a modular design for easy upgrades.
I attach the sources for your modifications.
Apologies for the lazy post
For Russian https://www.youtube.com/watch?v=7UsTHv5tJhI
P.S. add back panel for standart IO use with 3mm back motherboard racks, and assemble with standart IO panel
HDD* details ABS or PETG.
salazka10mm and stand TPU.
Other details PLA.
I spent about 1kg of plastic
For cooling use 120mm or 140mm fan.
Use M3 screws and nuts.
Multiple screws M3-10mm, M3-16mm, M3-20mm for case.
And long 3xM3-25mm for Front_Panel.
I used a modular design for easy upgrades.
I attach the sources for your modifications.
Apologies for the lazy post
For Russian https://www.youtube.com/watch?v=7UsTHv5tJhI
P.S. add back panel for standart IO use with 3mm back motherboard racks, and assemble with standart IO panel