Thingiverse
4"x4" Tile Stand 2 by RobertB67
by Thingiverse
Last crawled date: 4 years, 8 months ago
With desktop laser engravers getting more popular and since I have one on order the big craze right now is engraving tile, mostly 4"x4". This is my second design for a tile holder/stand.
just print it, no supports or brims required as long as you have your first layer dialed in.
Make sure you flip the Cross Bar so the pegs face up.
You Will need one M3 Nut and one M3 20mm screw.
The cross bar gets glued to the legs after you have the screw in the legs. Cross bar has pegs that fit into the holes on the legs so everything is level.
just print it, no supports or brims required as long as you have your first layer dialed in.
Make sure you flip the Cross Bar so the pegs face up.
You Will need one M3 Nut and one M3 20mm screw.
The cross bar gets glued to the legs after you have the screw in the legs. Cross bar has pegs that fit into the holes on the legs so everything is level.