4D Systems gen4 CTP-CLB Enclosure 5.0"

Last crawled date: 4 years, 2 months ago

This is a 3D Printable enclosure for wall / panel / enclosure mounting the 4D Systems 5.0" gen4 Products, such as the gen4-uLCD-50DCT-CLB intelligent display module, the gen4-4DCAPE-50CT-CLB Beaglebone Display, and the gen4-4DPI-50CT-CLB Raspberry Pi Display.
This particular enclosure is for our 5.0" gen4 displays with a Cover Lens Bezel (CLB):https://4dsystems.com.au/gen4-ulcd-50dct-clbhttps://4dsystems.com.au/gen4-ulcd-50d-clbhttps://4dsystems.com.au/gen4-4dcape-50ct-clbhttps://4dsystems.com.au/gen4-4dpi-50ct-clb
... and variants/kits thereof.
Parts required:
2x M4x10mm machine screws/bolts
1) Print the 2 parts of this enclosure.
2) Screw the backing plate (Insert) to your wall or enclosure/panel.
3) Stick the display's CTP-CLB bezel edge to the recess of the front cover (Body) of the 3D Printed model, using the 3M tape supplied on the edge of the displays CLB.
4) Place the front cover (Body) on top of the backing plate (Insert).
5) Carefully screw in 2x M4x10 screws into the sides to hold it together, and you have a nicely mounted enclosure.
Cabling can go into the wall or enclosure via the central hole in the backing plate (Insert), and there is enough room inside the enclosure to add some additional electronics if required.
If you would like to see this enclosure with some modifications, please comment and request, and we will try to accommodate you if we are able. The SLDPRT and STEP models however have been provided, so please modify them as you see fit. Please be sure to add them as a Remix if you do.
Enjoy!