Thingiverse
45 Raptor Magazine insert and follower by DavrosJr55
by Thingiverse
Last crawled date: 4 years, 8 months ago
A magazine insert for using ASC 10 Round 308 magazines with the 45 Raptor cartridges. The insert keeps the cartridges from moving forward under recoil and the lips assist in feeding the rounds up into the chamber. The follower is shortened to interface with the insert. Have only tested one magazine thus far. Still considered a work in progress here. I will also add inserts for the ASC 20 round magazine should I get around to it.
These prints will require some sanding and fitting to get working smoothly. Also can not speak to the long term affects of solvent, etc on the plastic - your mileage may vary. I have used both PLA and ABS to print these models. I am considering the Ninjatek ARMADILLO TPE for a longer wearing part.
For those not familiar, the 45 Raptor is a recently released big bore AR 10 caliber... see http://45raptor.com
These prints will require some sanding and fitting to get working smoothly. Also can not speak to the long term affects of solvent, etc on the plastic - your mileage may vary. I have used both PLA and ABS to print these models. I am considering the Ninjatek ARMADILLO TPE for a longer wearing part.
For those not familiar, the 45 Raptor is a recently released big bore AR 10 caliber... see http://45raptor.com