40mm LNB holder for T90 by LubosD

Last crawled date: 4 years, 7 months ago

This is an additional 40mm LNB holder for toroidal Wavefrontier T90 satellite dishes. After printing, you will need 3 flat tip 4.0x25mm screws with pan head (just like the original). You'll probably need to make the tip flat yourself ;-)
Recommended material: ABS with acetone vapor treatment.
Source files for OpenSCAD are available here: https://github.com/LubosD/3dprint-satellite/tree/master/t90-lnb_holder