Thingiverse
40MM Gasmask Magnetic Quick Connect by ThatDrewLion
by Thingiverse
Last crawled date: 4 years, 6 months ago
This is a magnetic quick-connect for Nato Threaded 40MM Gasmasks.
Each side is designed for 3 - 3mm x 6mm cylindrical magnets.
There is a fusion360 file if you wanted to create custom adapters but I've included connectors for a Pax Era Vaporizer and M28x2 threads (which connect to the PopKeep design I'll be publishing shortly).
The airflow seal isn't perfect, but it's mostly airtight. I found that printing the parts so that the connecting surfaces were on the top of the print (rather then against the print-bed) created a much better seal.
Each side is designed for 3 - 3mm x 6mm cylindrical magnets.
There is a fusion360 file if you wanted to create custom adapters but I've included connectors for a Pax Era Vaporizer and M28x2 threads (which connect to the PopKeep design I'll be publishing shortly).
The airflow seal isn't perfect, but it's mostly airtight. I found that printing the parts so that the connecting surfaces were on the top of the print (rather then against the print-bed) created a much better seal.