Thingiverse
4" Inlet Suckit Compatible Dust Shoe
by Thingiverse
Last crawled date: 5 years, 7 months ago
This is a 4" inlet shoe that is compatible with the suckit dust shoe mounting brackets for the SO3 with the HDZ upgraded Z-axis.
The light blue is the 2.5in Suckit dust boot that I bought. The black is the 4in dust boot I designed.
Here's the parts list to finish it:
Brass Inserts: https://www.mcmaster.com/94459a280
Socket Head Cap Screws: I bought a box of long ones and use my dremel to cut them down to the correct size since I was not sure what length I needed for the different locations. https://www.mcmaster.com/92196a152
1" Brush Strip: https://www.mcmaster.com/7900t1
1/4" x 1/4" Cylinder Magnets: I use these in my cribbage boards, so I already had a couple of hundred laying around. https://www.kjmagnetics.com/proddetail.asp?prod=D44
The light blue is the 2.5in Suckit dust boot that I bought. The black is the 4in dust boot I designed.
Here's the parts list to finish it:
Brass Inserts: https://www.mcmaster.com/94459a280
Socket Head Cap Screws: I bought a box of long ones and use my dremel to cut them down to the correct size since I was not sure what length I needed for the different locations. https://www.mcmaster.com/92196a152
1" Brush Strip: https://www.mcmaster.com/7900t1
1/4" x 1/4" Cylinder Magnets: I use these in my cribbage boards, so I already had a couple of hundred laying around. https://www.kjmagnetics.com/proddetail.asp?prod=D44