Thingiverse
4 IN CYCLONE SEPARATOR 2 WITH 2IN AND 40mm ADAPTER
by Thingiverse
Last crawled date: 5 years, 9 months ago
4 IN VACUUM CYCLONE SEPARATOR 2 - WITH 2IN AND 40mm ADAPTER
Inside walls are aligned face to face, no extra turbions to the process off cyclone separation !
300X300X400 REQUIRED PRINT VOLUME
Big volume and long prints! Recommend using a nozzle of 1.0mm to speed up the print process!
For a smaller version - 40mm hose see: https://www.thingiverse.com/thing:3183875
For a smaller version - 2inches hose see: https://www.thingiverse.com/thing:3972584
For a metal version - 4 inches hose see https://www.thingiverse.com/thing:3811097
Connections have build in place the plate adhesion - 0.6X4 - what need to be removed after print.
Cyclone is design to be secured with two M8 countersunk bolts, they are also used to discharge all electrostatic accumulation! Have a flat-bar or a striped electrical conductor between them (on the outside of the Cyclone) and connect it to the ground.
If the Cyclone is not connected directly on the dust drum cover, and is require to use a hose between them, in order to have easy access to the drum... see the Cyclone Collector Connector.
DESIGN TO PRINT WITHOUT SUPPORT! :) By Costa
Inside walls are aligned face to face, no extra turbions to the process off cyclone separation !
300X300X400 REQUIRED PRINT VOLUME
Big volume and long prints! Recommend using a nozzle of 1.0mm to speed up the print process!
For a smaller version - 40mm hose see: https://www.thingiverse.com/thing:3183875
For a smaller version - 2inches hose see: https://www.thingiverse.com/thing:3972584
For a metal version - 4 inches hose see https://www.thingiverse.com/thing:3811097
Connections have build in place the plate adhesion - 0.6X4 - what need to be removed after print.
Cyclone is design to be secured with two M8 countersunk bolts, they are also used to discharge all electrostatic accumulation! Have a flat-bar or a striped electrical conductor between them (on the outside of the Cyclone) and connect it to the ground.
If the Cyclone is not connected directly on the dust drum cover, and is require to use a hose between them, in order to have easy access to the drum... see the Cyclone Collector Connector.
DESIGN TO PRINT WITHOUT SUPPORT! :) By Costa