Thingiverse
![4 18650 cell thingamajig](/previews/4875332.jpg)
4 18650 cell thingamajig
by Thingiverse
Last crawled date: 4 years, 3 months ago
Very basic casing to allow spot welded cells in 1S4P or 2S4P be protected with a hole to allow wires to feed through the hole and solder onto the spotweld. .
You will need to flip it onto the round parts to the bed to print. It does not need support and the hole where the wire passes through is 1 layer thick to allow bridging, so you just put a screwdriver to punch the hole open and feed the wires.
This should fit snug enough on the 2 outer cells but found it slightly looser for the 2 inner ones due to the less support in between. I may put a little wall between the inner 2 cells if needed.
You will need to flip it onto the round parts to the bed to print. It does not need support and the hole where the wire passes through is 1 layer thick to allow bridging, so you just put a screwdriver to punch the hole open and feed the wires.
This should fit snug enough on the 2 outer cells but found it slightly looser for the 2 inner ones due to the less support in between. I may put a little wall between the inner 2 cells if needed.
Similar models
thingiverse
free
![El Wire Cyborg Eye by fsevsedv](/t/8792362.jpg)
El Wire Cyborg Eye by fsevsedv
...e you glue it
and if you don't have el wire you can put a pice of glow in the dark filament in the holes.)
happy halloween!!!
thingiverse
free
![Dquad Obsession V2 XSR mount by Awacs](/t/8681308.jpg)
Dquad Obsession V2 XSR mount by Awacs
...spacer you can feed the antenna wires through the channel.
the xsr is fixed with double-sided tape on the underside of the mount.
thingiverse
free
![Inner Edge Hole Cover for CTC, Flashforge and similar by zumili](/t/8839077.jpg)
Inner Edge Hole Cover for CTC, Flashforge and similar by zumili
...so you can put some cable through it. the models are designed up-side-down so you don't need any support...
thingiverse
free
![Flux Capacitor Electronics addon cover by rkxone](/t/8116283.jpg)
Flux Capacitor Electronics addon cover by rkxone
...his will print in about 3 minutes.
no supports needed, you may want to sand the edges a fraction for the fit that best suits you.
thingiverse
free
![20mm Coin Cell Battery Holder by mrownership](/t/8948309.jpg)
20mm Coin Cell Battery Holder by mrownership
...two wires in place.
the battery is a tight fit and my need some pushing to fit in, easily removes with a pair of pliers though.
thingiverse
free
![18650 holder configurable by databeestje](/t/8737261.jpg)
18650 holder configurable by databeestje
...e cells from there.
you can configure half open or not with a true/false. it only makes sense on the 2 by x configuration though.
thingiverse
free
![Parametric button cell holder version 2 by WardElder](/t/9000556.jpg)
Parametric button cell holder version 2 by WardElder
...battery out
added ability to stack batteries
auto reorientation to place properly on build plate
no support material needed
thingiverse
free
![A23 Cell Battery Holder by marcoa131](/t/8300751.jpg)
A23 Cell Battery Holder by marcoa131
...ngiverse
a a23 cell battery holder based on enif's design, made the holes bigger so it's easier to put wires through it.
thingiverse
free
![Wire Protector for GoBilda FTC Robots](/t/4770554.jpg)
Wire Protector for GoBilda FTC Robots
...orgot to put the protector in before you wired-up your robot? print some of these! print it using a moderately flexible filament.
thingiverse
free
![Spool Sleeve Adapter by h4wkie](/t/8149425.jpg)
Spool Sleeve Adapter by h4wkie
...older = 55.2mm max
outer holder = 74.1mm max (used with the inner holder)
slide onto the enders spool holder
no supports needed
Thingamajig
3d_export
$5
![Kingston 2gb flash drive 3D Model](/t/339428.jpg)
Kingston 2gb flash drive 3D Model
...crook turn events tress pull winding plait doojigger braid thingamajig twirl thingumabob catch thingmabob twisting wind gubbins whatchamacallum gizmo...
thingiverse
free
![Todds antenna thingamajig by 5bites](/t/8523479.jpg)
Todds antenna thingamajig by 5bites
...todds antenna thingamajig by 5bites
thingiverse
thing for todd. invoice is in the mail
thingiverse
free
![Thingamajig by jwdiana](/t/8026675.jpg)
Thingamajig by jwdiana
... openscad and look in the holes so i decided to print it. the large cube is 80x15x80.
i printed in petg but any filament will do.
thingiverse
free
![Thingamajig ( Joel Delfin Spring 2018) by DIG2500](/t/8587362.jpg)
Thingamajig ( Joel Delfin Spring 2018) by DIG2500
...thingamajig ( joel delfin spring 2018) by dig2500
thingiverse
project 1 for digital media class
thingiverse
free
![Tulagi Hotel thingamajig by Heikki_Hietala](/t/689065.jpg)
Tulagi Hotel thingamajig by Heikki_Hietala
....com/tulagi-hotel-romance-adventure-ebook/dp/b009ishpdk/ref=cm_cr_pr_product_top) and this little prop is for marketing purposes.
thingiverse
free
![z = theta (Spiral Thingamajig) by jamesford007](/t/9000827.jpg)
z = theta (Spiral Thingamajig) by jamesford007
...= theta/20 pi, {t, 0, 1}, {theta, 0, 6 pi},
boxratios -> automatic, boundarystyle -> black,
plotstyle -> thickness[.1] ]
thingiverse
free
![Bi-fold door lock thingamajig by bummster](/t/8863489.jpg)
Bi-fold door lock thingamajig by bummster
..., 2016
yeah, print the one with the hole. took more than one try by more than one person, but the part eventually shattered. :)
thingiverse
free
![fidget toy- all one piece! by cmot17](/t/8951919.jpg)
fidget toy- all one piece! by cmot17
...thingiverse a fidget toy based on my spinny hinge thingamajig ...
thingiverse
free
![Graduation 2016 Card Front or Key Ring Zipper Pull by craeen](/t/8827809.jpg)
Graduation 2016 Card Front or Key Ring Zipper Pull by craeen
...ring zipper pull by craeen thingiverse a 2016 graduation thingamajig you can use it as a card front, or...
18650
3d_export
$10
![battery 18650](/t/11920853.jpg)
battery 18650
...battery 18650
3dexport
battery 18650
turbosquid
$10
![18650 Li-ion Battery](/t/13319808.jpg)
18650 Li-ion Battery
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
![lithium ion 18650 battery](/t/11388083.jpg)
lithium ion 18650 battery
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
3d_export
$10
![18650 lithium battery](/t/11369554.jpg)
18650 lithium battery
...your software before making a purchase is highly recommend. -in case of problems with the 3d model, do not hesitate to contact me
3d_export
free
![solar rechargeable single led flashing light](/t/11930061.jpg)
solar rechargeable single led flashing light
...light 3dexport unit was design for housing a single 18650 lithium-ion battery and mini solar panel 55mm x 41mm-...
3d_export
$12
![Emoji 042 Loudly Crying With Tears](/t/13070332.jpg)
Emoji 042 Loudly Crying With Tears
...spec/gloss textures<br>- blend (cycles): metal/roughnes textures<br>geometry:<br>- units: centimeters<br>- polygons: 18650lt;br>- vertex: 18822<br>- triangles: 2<br>- quads: 18648<br>- ngons: 0<br>- vertex...
thingiverse
free
![18650](/t/4753811.jpg)
18650
...18650
thingiverse
18650 power supply, vase mode
thingiverse
free
![18650 CASE](/t/4888917.jpg)
18650 CASE
...18650 case
thingiverse
18650 case!
thingiverse
free
![18650 holder](/t/4773344.jpg)
18650 holder
...18650 holder
thingiverse
18650 holder
thingiverse
free
![18650 dispenser](/t/4657733.jpg)
18650 dispenser
...18650 dispenser
thingiverse
18650 dispenser for 10 batteries.
Cell
archibase_planet
free
![Cell](/t/948594.jpg)
Cell
...cell
archibase planet
cage cell
cell n050510 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$14
![Blood Cells](/t/11371272.jpg)
Blood Cells
...poiesis and found in the blood. major types of blood cells include; red blood cells (erythrocytes) white blood cells (leukocytes)
3d_export
$5
![cell](/t/11923049.jpg)
cell
...cell
3dexport
turbosquid
$89
![Cell](/t/13495292.jpg)
Cell
...
royalty free 3d model cell for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1225448)
turbosquid
$19
![Cell](/t/13496908.jpg)
Cell
...
royalty free 3d model cell for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1528922)
3d_ocean
$5
![Lithium Cells](/t/566206.jpg)
Lithium Cells
...cr2032 cr2450 lithium lithium battery lithium cell power
some lithium cells. cr2032, cr2025, cr2016, cr2450 faces: ca. 65000 each
turbosquid
$45
![cell](/t/13443906.jpg)
cell
...yalty free 3d model cell for download as ma, ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1650714)
3d_export
$5
![Blood cells](/t/12788564.jpg)
Blood cells
...blood cells
3dexport
blood cells 3d model
3ddd
$1
![solar cell](/t/694425.jpg)
solar cell
...solar cell
3ddd
солнечная батарея
solar cell
turbosquid
$60
![Cell](/t/13381117.jpg)
Cell
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
4
turbosquid
$9
![Office Chair 4-4](/t/13447765.jpg)
Office Chair 4-4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![doors- 4](/t/11927333.jpg)
doors- 4
...doors- 4
3dexport
doors 4
3d_export
$5
![hinge 4](/t/11920336.jpg)
hinge 4
...hinge 4
3dexport
hinge 4
3ddd
$1
![Штора №4](/t/605461.jpg)
Штора №4
...штора №4
3ddd
штора №4
3d_export
free
![playstation 4](/t/11423512.jpg)
playstation 4
...playstation 4
3dexport
playstation 4
turbosquid
$1
![re 4-4 electric locomotive](/t/13479488.jpg)
re 4-4 electric locomotive
... free 3d model re 4 4 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707845)
3ddd
$1
![nexus 4](/t/386957.jpg)
nexus 4
...nexus 4
3ddd
lg , телефон
nexus 4
3ddd
$1
![4 Poufs](/t/460335.jpg)
4 Poufs
...4 poufs
3ddd
пуф
4 soft poufs
turbosquid
$12
![Calligraphic Digit 4 Number 4](/t/13397641.jpg)
Calligraphic Digit 4 Number 4
...hic digit 4 number 4 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389332)
3ddd
$1
![Dauphin 4+](/t/955479.jpg)
Dauphin 4+
...dauphin 4+
3ddd
кресло
dauphin 4+ конференц кресло