Thingiverse
3x3x6 by kequals
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a 3x3x6 twisty puzzle. Each short face can turn in increments of 90 degrees, and each long face can turn 180 degrees. This puzzle cannot shapeshift.
To make this print each part by the number of times indicated on the file name.
1 Alignment
3 Hidden Edges
4 Short Centers
2 Long Centers
8 Outer Corners
8 Outer Edges
8 Middle Corners
8 Middle Edges
7 Inner Corners
8 Inner Edges
1 Core (not recommended)
There are 7 inner corners and 3 hidden edges because the alignment piece combines one of each.
It is highly recommended to use a factory-made core rather than a 3D printed one. You can buy one here:https://thecubicle.us/qiyimfg-core-p-8461.html
You also need 6 M3 screws, which can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 57mm 3x3.
To make this print each part by the number of times indicated on the file name.
1 Alignment
3 Hidden Edges
4 Short Centers
2 Long Centers
8 Outer Corners
8 Outer Edges
8 Middle Corners
8 Middle Edges
7 Inner Corners
8 Inner Edges
1 Core (not recommended)
There are 7 inner corners and 3 hidden edges because the alignment piece combines one of each.
It is highly recommended to use a factory-made core rather than a 3D printed one. You can buy one here:https://thecubicle.us/qiyimfg-core-p-8461.html
You also need 6 M3 screws, which can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 57mm 3x3.
Similar models
thingiverse
free
2x3x5 by kequals
...se screws, you need to sand two of them down a bit so they don't protrude out of the centers.
stickers are standard 57mm 3x3.
thingiverse
free
Pentagonal 3x3x4 Twisty Puzzle by kequals
... stickers on the 3x4 side faces are standard 57mm 3x3 stickers. the top and bottom stickers can be cut from the sticker template.
thingiverse
free
Pentagonal 3x3x5 Twisty Puzzle by kequals
... stickers on the 3x3 side faces are standard 57mm 3x3 stickers. the top and bottom stickers can be cut from the sticker template.
thingiverse
free
1x3x5 by kequals
...e standard 57mm 3x3 stickers. the 1x5 and 1x3 faces measure about 19mm x 25mm, so you can cut stickers a bit smaller to fit them.
thingiverse
free
Pillowed 1x3x5 by kequals
...kers for the 1x3 and 1x5 faces are standard 57mm 3x3 stickers. the 3x5 faces are pillowed, but 3x3 stickers should probably work.
thingiverse
free
Octagonal Prism Twisty Puzzle by kequals
... stickers on the 3x3 side faces are standard 62mm 4x4 stickers. the top and bottom stickers can be cut from the sticker template.
thingiverse
free
Heptagonal Prism Twisty Puzzle by kequals
... stickers on the 3x3 side faces are standard 62mm 4x4 stickers. the top and bottom stickers can be cut from the sticker template.
thingiverse
free
Helicopter 2x2 Twisty Puzzle V2 by kequals
...d shorter screws. the ones i used were 12mm long.
stickers can be cut from the template, or you can use helicopter cube stickers.
thingiverse
free
Pentagonal Prism Twisty Puzzle by kequals
... stickers on the 3x3 side faces are standard 57mm 3x3 stickers. the top and bottom stickers can be cut from the sticker template.
thingiverse
free
1x2x5 by kequals
...pring from a 3x3, they can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
stickers are standard 57mm 3x3.
3X3X6
thingiverse
free
Domino 3x3x6
... screws 16mm long to assemble this puzzle. you can check out my other puzzle designs at https://www.thingiverse.com/sos1/designs.
thingiverse
free
Identical Twins pieces to finish it off by TheFisherOne
...cube. as an interesting aside: you can make a 3x3x6 cube with the following pieces: 4 l 2 t...
3dwarehouse
free
Pallet Couch
...pallet couch 3dwarehouse a couch designed out of 3x3x6#39; wooden full face pallets #couch #pallet_couch...
3dwarehouse
free
Pallet Coffee Table
...pallet coffee table 3dwarehouse coffe table made from 3x3x6#39; wooden full face pallets made to acompany pallet couch...
3dwarehouse
free
Pallet end table
...pallet end table 3dwarehouse an end table made from 3x3x6#39; wooden full faced pallets was designed to go along...
Kequals
thingiverse
free
1x2x5 by kequals
...pring from a 3x3, they can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
stickers are standard 57mm 3x3.
thingiverse
free
1x2x7 by kequals
...crew and spring, which can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
stickers are standard 57mm 3x3.
thingiverse
free
1x2x6 by kequals
... that your screw is still threaded. the screw needs to be extremely small for the puzzle to work.
stickers are standard 57mm 3x3.
thingiverse
free
1x2x4 by kequals
... that your screw is still threaded. the screw needs to be extremely small for the puzzle to work.
stickers are standard 57mm 3x3.
thingiverse
free
5x5x7 by kequals
...rews and 6 springs. you can buy them here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
stickers are standard 64mm 5x5.
thingiverse
free
1x3x5 by kequals
...e standard 57mm 3x3 stickers. the 1x5 and 1x3 faces measure about 19mm x 25mm, so you can cut stickers a bit smaller to fit them.
thingiverse
free
2x5x5 by kequals
...kers, and the top and bottom stickers can be cut from the template. the corners and center of the top also use 62mm 4x4 stickers.
thingiverse
free
1x5x5 by kequals
...kers, and the top and bottom stickers can be cut from the template. the corners and center of the top also use 62mm 4x4 stickers.
thingiverse
free
1x4x4 by kequals
...top/bottom and side stickers can be cut from the template. the corner pieces of the top and bottom are regular 57mm 3x3 stickers.
thingiverse
free
3x5x5 by kequals
...cover the hole completely.
the the 3x5 sides use 62mm 4x4 stickers, and the top and bottom stickers can be cut from the template.