Thingiverse
3x3 Dodecahedron by MHcubes
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a shape mod of a 3x3 in the form of a dodecahedron. This puzzle was mass produced by qj at one point, but it is now quite rare, so I decided to design my own. I'm not sure what the dimensions of the mass produced version were, but mine measures 57mm in height, the same as a standard 3x3. This is one of the first puzzles I designed and overall I am quite happy with it.
The brilliant center cap design was "borrowed" from rcpongo so all credit goes to him for that.
Required Hardware: core, screws, and springs from a 3x3 (I used a guanlong; you might be able to use hardware from another 3x3 but no guarantees.) Here's a link: https://thecubicle.us/guanlong-plus-p-9647.html
Parts Roster:
Center (x6)
Center Cap (x6)
Edge (x12)
Corner 1 (x4)
Corner 2 (x4)
*note: you do actually need to print 4 of each type of corner; they look similar but are actually mirror images of each other.
The brilliant center cap design was "borrowed" from rcpongo so all credit goes to him for that.
Required Hardware: core, screws, and springs from a 3x3 (I used a guanlong; you might be able to use hardware from another 3x3 but no guarantees.) Here's a link: https://thecubicle.us/guanlong-plus-p-9647.html
Parts Roster:
Center (x6)
Center Cap (x6)
Edge (x12)
Corner 1 (x4)
Corner 2 (x4)
*note: you do actually need to print 4 of each type of corner; they look similar but are actually mirror images of each other.