Thingiverse
3M Valve SA-1029 - Holder by xDiscoSTUx
by Thingiverse
Last crawled date: 4 years, 7 months ago
Hi, here is my Holder for 3M Valve SA-1029. I created this holder mainly to avoid saying " Big Words " due to the original bracket that used to come out of the belt when I paint crouched or inserted into my pants and pulled my lower back hair ( Duvet en Français )
You will have to insert the belt ( Mine - 3M Belt GVP-127 ) in the holder and I suggest you to protect it so that it is not in contact with solvents ...
I printed mine In PLA without supports and with :
Layers : 0.2
Walls : 4
Top/Bottom : 8
Infill : 40% Grid Form
60mm/s
Have a Nice Day! :D
You will have to insert the belt ( Mine - 3M Belt GVP-127 ) in the holder and I suggest you to protect it so that it is not in contact with solvents ...
I printed mine In PLA without supports and with :
Layers : 0.2
Walls : 4
Top/Bottom : 8
Infill : 40% Grid Form
60mm/s
Have a Nice Day! :D