3DW french cleat spool holder with Auto-Rewind Clutch and masterspool by agroezinger

Last crawled date: 3 years, 1 month ago

3DW Spool holder for french cleat
For the spool holder you have to print:
2x 3DW_Spool_Holder_Prusa_Version.stl
1x 3DW_Spoolholder_Connector.stl
For assembly of the spool holder you need:
4x M4 nut
4x M4x16 screw (buttonhead for example)
Print recomendations:
print with 4-5 perimeters
print with 4-5 shells
print with 15-20% infill
3DW master spool
master spool for 750g refill rings
For the masterspool you have to print:
2x 3DW_Masterspool_Side.STL
1x 3DW_Masterspool_Base.STL
you can print without supports
Sisyphus Clutch
I've just added the stl's of this beautiful thing to have all in one place. Make sure to credit the designer of the sisyphus clutch mod (thing:3757556)
Some of the parts are from the awesome Universal Auto-Rewind spool holder (thing:3338467). Make sure to credit the designer of this awesome thing, too.
For the sisphus clutch mod you have to print:
1x Clutch_Wheel.stl
2x Cog.stl
1x Hub_shortened.stl (print this one with support for the bottom hole
2x NutCurved_v3.3.STL
1x Shaft.stl
1x Dial.stl
You'll need 2x 608 bearing aswell