Thingiverse
3DSets 2-piece brake rotor and hub by mc1457
by Thingiverse
Last crawled date: 4 years, 3 months ago
Wheel hub spacer for Rancher or Landy. Pushes the wheels 11 mm further out and adds a nice 2-piece disc brake rotor because racecar. Print the rotor in silver and the hub in black...or orange...or pink. Whatever floats yer boat.
Rotor attaches to the hub with 6 M2x6 screws. I suggest drilling and tapping the screw holes.
The hub is predrilled for a 12 mm bolt pattern.
Hub size is 7.9 mm outer, 8.2 mm inner.
Use a longer 25 mm M3 bolt to attach through the wheel and hub to the axle or 6 M2 bolts, if your wheels support it.
Rotor attaches to the hub with 6 M2x6 screws. I suggest drilling and tapping the screw holes.
The hub is predrilled for a 12 mm bolt pattern.
Hub size is 7.9 mm outer, 8.2 mm inner.
Use a longer 25 mm M3 bolt to attach through the wheel and hub to the axle or 6 M2 bolts, if your wheels support it.