Thingiverse
3dr solo foldable leg with pin v 1,3 by krab
by Thingiverse
Last crawled date: 4 years, 7 months ago
Put the leg sets together with 3D Printed Pins
ROBO 3D R1 Plus
PLA Filament
CURA
The Pins are 13.19 mm long
The Pins are 1.87 mm radius
On a Raft
Use a paper towels or cloth between the leg parts, pins and pliers to prevent scratching or damaging the leg joints.
Use low, slow and study pressure, checking the leg joint periodically between pin movement.
ROBO 3D R1 Plus
PLA Filament
CURA
The Pins are 13.19 mm long
The Pins are 1.87 mm radius
On a Raft
Use a paper towels or cloth between the leg parts, pins and pliers to prevent scratching or damaging the leg joints.
Use low, slow and study pressure, checking the leg joint periodically between pin movement.