3D Printer Stand by jonbourg

Last crawled date: 3 years ago

Not a usual thing but decided to share.
Built this for my new 3D printer. I had bought a plastic shelf unit at Lowe's but it shook around too much. I liked the dimensions of it and the shelves. Decided I could build something fairly cheaply.
Looked at a lot of workbenches and shelves and went for it. Spent $50 on the wood and built over 4-5 days. The main legs are 2x4 the shelf sections are 2x3 and the tops of the shelves are 1/2 inch particle board. Painted it milkshake brown with whipped cream on the top of the shelves!
I've included a build sheet and an STL file as a placeholder.
NOTE: The white parts of the 3D model picture above have to be measured and cut according to the height of the shelf material used. For example: I used 1/2 inch particle board and if you decide to use 3/4 inch material they will be a little shorter. To make it easier you could use a standard length like 12 or 13 inches on the bottom and adjust the height of the top parts to fit.