Thingiverse
3D Printer Heated Bed Power Module Housing by Keith1212
by Thingiverse
Last crawled date: 3 years, 1 month ago
I made this housing for an add on to my Prusa I3s heated bed. This will house a Power Module for heated beds. Taking the load off of your control board. https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=3D+Printer+Heated+Bed+Power+Module&_sacat=0
I added a 40mm fan to keep it cool.(Probably not needed, but hey why not you have 12v right there.) You could mount the fan on the inside or outside if you like.
All screws will be M3 and will thread into the housing. I designed this so you can get to all the screws inside with your allen wrench during installation.
For mounting the housing You can use any or all of the four holes on the bottom. The pcb will sit high enough to use a cap screw and a washer or just a cap screw.
For mounting the Pcb The Pcb will fit into the box at an angle and then sit flat onto the four pedestals. Use four M3 cap screws to secure the Pcb.
I added a 40mm fan to keep it cool.(Probably not needed, but hey why not you have 12v right there.) You could mount the fan on the inside or outside if you like.
All screws will be M3 and will thread into the housing. I designed this so you can get to all the screws inside with your allen wrench during installation.
For mounting the housing You can use any or all of the four holes on the bottom. The pcb will sit high enough to use a cap screw and a washer or just a cap screw.
For mounting the Pcb The Pcb will fit into the box at an angle and then sit flat onto the four pedestals. Use four M3 cap screws to secure the Pcb.
Similar models
thingiverse
free
Heated bed power module fan mount by ergeorge
...the heated bed power module available from reprapchampion:
https://reprapchampion.com/products/3d-printer-heated-bed-power-module
thingiverse
free
Vertex K8400 Heated bed MOS-mount by RubenDenolf
...s: https://www.banggood.com/3d-printer-parts-board-high-power-expansion-add-on-heated-bed-mos-module-p-1141753.html?rmmds=myorder
thingiverse
free
TronXY X3S heated bed MOSFET mount by spectrelabs
...446daeffb1225a4315463c157132
in my photos i only used 2 m3 screws and nuts to mount the mosfet. you can use 4 screws if you wish.
thingiverse
free
Case for Heat Bed Power Expansion Module by Jaecko
... as a drilling template.
the holes for the mounting screws are 2.8mm in diameter for m3 screws, so no additional nuts are needed.
thingiverse
free
Heated Bed MOSFET Module 280A by Try-n-Make-Me
...m4 screws and 2020 slot screws xm4 for attaching to printer. use tronxy community instructions for the wiring information. enjoy!
thingiverse
free
Mosfet Box with 30mm Fan Mount by Thundrfuk
...-power-module-board-high-current-210a-mosfet-upgrade-ramps/112433582882?hash=item1a2d905322:g:htqaaoswjqvznofb.
hope you like it!
thingiverse
free
Power supply fan mount by goth_fpv_quads
...it on your power supply unit, i suggest to replace the upper screw with 1x m3x8mm screw to secure it in place.
happy printing! :)
thingiverse
free
B3606 Power Supply module Housing by gymprince
...ing by gymprince
thingiverse
i bought that module from taobao. four m3 screws for fixing the board. panel can snap into housing.
thingiverse
free
Anet A8 Heat bed module top mount by mugs
...mount the module. i used the spares that came with the kit.
there is no thread in the hole, just the right size to make its own.
thingiverse
free
External Heated Bed Mosfet module mount (HA210N06) by S3bape
...
optional 40mm fan mount included.
24-06-2017 - v2 version added - optimized fan mount placement and fan mounting holes diameter.
Keith1212
thingiverse
free
3D 40mm Fan Grill by Keith1212
...s is my second design since owning a 3d printer. just a simple 40mm fan grill with the text "3d" using comic sans font.
thingiverse
free
Thrustmaster Handbrake Plate by Keith1212
...com/watch?v=9euvny6ivhw
if you want a written guide you can find that here: http://www.instructables.com/id/thrustmaster-ebrake/
thingiverse
free
CTC Prusa I3 Clone Badge by Keith1212
...ere was a clear serial number tag that was meant to go there. the hole spacing is 64mm. may fit other printers of the same style.
thingiverse
free
Prusa I3 / P3 Steel Z Stop Mount by Keith1212
...end stop for this x axis setup: http://www.thingiverse.com/thing:1762757
couldn't find the right one i needed so i made this.
thingiverse
free
P3 Steel Y-Axis Endstop by Keith1212
...o the 3mm p3 steel frame. i may in the future use the single bolt hole on the p3 frame to hold this. but atm it's not needed.
thingiverse
free
CTC Prusa I3 Cone Y stop Extender by Keith1212
...e old one did not. therefore i needed to extend the y stop. this is for a plywood frame prusa i3 clone. see pic for correctness.
thingiverse
free
3d Printer Tool Holder by Keith1212
...1 - fixes problems in slic3r. slices fine in s3d, cura, and slic3r now.
update: added v1.5 - rounded edges down by the tool tray.
thingiverse
free
Wire Loom and Bowden Tube Bracket for Reprap Prusa I3 by Keith1212
...with a 0.4 nozzle with 0.2mm layer height, 1.75mm pla filament,210 degrees, and supports.
this is my first design using sketchup.
thingiverse
free
Betrayal At The House On The Hill: Madman Companion Figure by Keith1212
...com/thing:2029546 by: dutchmogul
please go to dutchmoguls make page and give him thanks! http://www.thingiverse.com/thing:1349347
thingiverse
free
Betrayal At The House On The Hill: Girl Companion Figure by Keith1212
....com/thing:2029535 by:dutchmogul
please go to dutchmoguls make page and give him thanks! http://www.thingiverse.com/thing:1700828
Module
thingiverse
free
Modulator 2008B
...modulator 2008b
thingiverse
this is a federal signal modulator 2008b. this is electronic.
thingiverse
free
Modules by Spillusion
...modules by spillusion
thingiverse
thingiverse
free
Openstructures module by randa_prod
...openstructures module by randa_prod
thingiverse
basic module 4cmx4cm
thingiverse
free
OLED Module by Lofttomte
...oled module by lofttomte
thingiverse
oled module 0.96"
thingiverse
free
Module by narinekaa
...module by narinekaa
thingiverse
heihde
thingiverse
free
Skyzone Module Adapter
...later for the receiver, the module take power from the battery plug, with avin mode, the goggles can use rapidfire or tbs fusion.
thingiverse
free
River Module by Troybenji
...river module by troybenji
thingiverse
a simple river module i created in tinkercad
thingiverse
free
Stand Module by Willermax
...stand module by willermax
thingiverse
this is a module that i made for my filament stand.
thingiverse
free
module bay for TBS fusion module aomway v1 mod by Dadog92
...module bay for tbs fusion module aomway v1 mod by dadog92
thingiverse
module bay for tbs fusion module aomway v1 mod
thingiverse
free
Laser Module crosshair eye
...laser module crosshair eye
thingiverse
laser module holder for a 9mm laser module.
Heated
thingiverse
free
NFS Heat
...nfs heat
thingiverse
nfs heat
thingiverse
free
heat by syalovitser
...heat by syalovitser
thingiverse
the miami heat logo. made in printcraft. james,bosh and wade!
thingiverse
free
Heating Rosette by Achiim
...ed stl is designed for standard heating sizes. but you can change the size of your heating rosette by changing the uploaded scad.
thingiverse
free
Heat bed 8x10 glass to 6x9 heat bed by hobbit1968
...heat bed 8x10 glass to 6x9 heat bed by hobbit1968
thingiverse
heat bed, 8x10 glass to 6x9 heat bed.
thingiverse
free
Heat-Tower by JMDesigns
...heat-tower by jmdesigns
thingiverse
heat-tower
thingiverse
free
heating key
...ey
thingiverse
this is a key to vent the heating in the house i hope you enjoy it.
follow me in instagram for more: 3d_print2018
thingiverse
free
Heating faucet by Woodruff
...heating faucet by woodruff
thingiverse
heating faucet replacement
thingiverse
free
Heated Bed by AnyWay
...heated bed by anyway
thingiverse
simple heated bed.
thingiverse
free
Heat Bed to Heat Chamber Adapter-6 fan by 3DCDN
...y 3dcdn
thingiverse
i made this adapter so that i could inject heat generated from my heat bed into the 3d printer heat chamber.
thingiverse
free
heat logo by LeeroyLeBG
...heat logo by leeroylebg
thingiverse
heat logo for 3d printer
Housing
thingiverse
free
House
...house
thingiverse
generic house
thingiverse
free
house by
...house by
thingiverse
a normal house
thingiverse
free
House
...house
thingiverse
a copy of my house.
thingiverse
free
House
...house
thingiverse
this is a house that has a garage.
thingiverse
free
house by
...house by
thingiverse
just a normal house... or is it?
thingiverse
free
House by
...house by
thingiverse
it's a house
thingiverse
free
House by
...house by
thingiverse
it's a house
thingiverse
free
house by
...house by
thingiverse
a nice house with a driveway and a car
thingiverse
free
house
...house
thingiverse
it is a house with 1 room
i made this for a class project
thingiverse
free
House by aaronalvarez365
... by aaronalvarez365
thingiverse
this house was designed in tinkercad and this house is mainly a house with a porch in the front.
Power
thingiverse
free
Power Macintosh Power PC Power Button (Repaired) by 360alaska
...power macintosh power pc power button (repaired) by 360alaska
thingiverse
repaired the power button
thingiverse
free
Power adaptation for switching power by vladimirgaal
...tation with switch to be used directly on switching power supply.
be sure that this part is compatible with your switching power.
thingiverse
free
power jack
...power jack
thingiverse
iec ac jack power
thingiverse
free
POWER SUPLY HIDE POWER SWITCH by Thearc
...power suply hide power switch by thearc
thingiverse
hello ! i made this power switch for my new power suply
work really well
thingiverse
free
Power supply & power button support by thomasgobert
...power supply & power button support by thomasgobert
thingiverse
needed !
thingiverse
free
Power Bank Box for Power Bank with light by 344026653
...power bank box for power bank with light by 344026653
thingiverse
this is where the power bank parts are kept in.
thingiverse
free
Power Macintosh Power PC Power Botton ;) by Rattiso
...stic, pegt not yet tested, should be even more durable than pla
better before installing, glue
the power button to the holder !!!
thingiverse
free
Power Switch and Power Plug Angle Brackets by EvolHub
...brackets
power switch bracket hole is designed for "carling ra901/911t85" switch, but should fit similar size switches.
thingiverse
free
flower power by Syzguru11
...flower power by syzguru11
thingiverse
flower power
thingiverse
free
flower power by Syzguru11
...flower power by syzguru11
thingiverse
flower power
Bed
thingiverse
free
bed by
...bed by
thingiverse
pink bed with a white pillow
thingiverse
free
Kossel Plus bed holder for aluminium bed with glass bed
...kossel plus bed holder for aluminium bed with glass bed
thingiverse
pla
thingiverse
free
bed by Syzguru11
...bed by syzguru11
thingiverse
bed
thingiverse
free
bed by callsaul
...bed by callsaul
thingiverse
bed
thingiverse
free
BED by leonk
...bed by leonk
thingiverse
bed
thingiverse
free
Bed by FaserMok
...bed by fasermok
thingiverse
bed
thingiverse
free
Bed by alexdfox
...bed by alexdfox
thingiverse
bed maker
thingiverse
free
bed stanchion
...bed stanchion
thingiverse
top of a bed stanchion
thingiverse
free
bed by bhawkinscds
...bed by bhawkinscds
thingiverse
four post bed
thingiverse
free
bed by EricG
...bed by ericg
thingiverse
bed by eric [created on 3dtin]
Printer
thingiverse
free
printer by riegel
...printer by riegel
thingiverse
printer
thingiverse
free
Printer by elnuvoldesign
...printer by elnuvoldesign
thingiverse
printer
thingiverse
free
3D Printer of a 3D printer by wacko
...3d printer of a 3d printer by wacko
thingiverse
a 3d print of the new low costs ready to print, 3d printer from www.pp3dp.com
thingiverse
free
Printer case light (X3D printer) by arekm
...printer case light (x3d printer) by arekm
thingiverse
printer case light.
thingiverse
free
Printer Knob by arthurTW
...printer knob by arthurtw
thingiverse
printer knob for delta 3d printer
thingiverse
free
3d printer part for Irapid printer by esadesad
...use damage to your printer. this solution fixes the platform of the printer with magnets and allows more precise printing models.
thingiverse
free
printer parts by kmoore22
...printer parts by kmoore22
thingiverse
printer parts for montevallo build your own 3d printer course
thingiverse
free
3D PRINTER by juju68
...3d printer by juju68
thingiverse
3d printer
thingiverse
free
Light on the printer by umitakin
...light on the printer by umitakin
thingiverse
light on the printer
thingiverse
free
Calibrate the printer by olo2000pm
...calibrate the printer by olo2000pm
thingiverse
calibrate the printer