Thingiverse
3D-printable linear actuator by Bribro12
by Thingiverse
Last crawled date: 3 years ago
Video can be found here: https://www.youtube.com/watch?v=99aw_77oUvY
STL and Editable Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/3d-printable-linear-actuator-files
This linear actuator is almost completely 3D printed (except for the thread and some bolts, nuts and bearings).I curently don't have any position feedback or limited switches installed on it, I will add them in the feature when I'm going to integrate it in a projecct. It has a speed of about 25 mm/s on a 9V battery and draws about 1.7 Amps of curent. The motor is rated for 36 Volts. Running the linear actuator on a 36 Volt battery will increase the speed of the actuator. The transmission is a belt driven one wich uses a GT2 timing belt and a 3D printed GT2 pulley, This may not be the most ideal transmission for this task but it'll do for some testing. The linear actuator uses an M8 thread to convert the rotating motion into a linear motion. All parts (except for the 120 teeth pulley) are printed with a 1 mm nozle because there is no high accuracy required and it goes a lot faster. Some people are sceptic about using a 1mm nozzle but I think it's good for printing large objects like these without the need for accuracy. And it works great for me.
Video can be found here: https://www.youtube.com/watch?v=99aw_77oUvY
More info can be found here: https://hackaday.io/project/52706-3d-printable-linear-actuator
Components used:
1 × l298N motor driver
link: https://www.banggood.com/Wholesale-Dual-H-Bridge-DC-Stepper-Motor-Drive-Controller-Board-Module-Arduino-L298N-p-42826.html?p=E01411629100201406T1&custlinkid=255131
1 × Arduino nano V3
link: https://www.banggood.com/Geekcreit-ATmega328P-Nano-V3-Module-Improved-Version-With-USB-Cable-Development-Board-For-Arduino-p-933647.html?p=E01411629100201406T1&custlinkid=255135
1 × 775 electric motor 36 Volt
link: https://www.banggood.com/775-Gear-Motor-DC-12V-36V-3500-9000RPM-Motor-Large-Torque-High-power-Motor-p-1091058.html?rmmds=search&cur_warehouse=CN
1 × Pulley for motor side, 5mm bore, 16 teeth
link: https://www.banggood.com/162036T-GT2-Aluminum-Timing-Pulley-For-DIY-3D-Printer-p-1001266.html?p=E01411629100201406T1&custlinkid=669283
2 × 8mm inner diameter bearings
link: https://www.banggood.com/10pcs-8x19x6mm-Steel-Sealed-Shielded-Deep-Groove-Ball-Bearings-698ZZ-p-980204.html?rmmds=search&cur_warehouse=CN
1 × Gt2 timing belt 260-GT2-6https://www.robotdigg.com/product/283/260mm-264mm-268mm-280mm-288mm-or-294mm-gt2-endless-belt
1 × M8 thread rod
7 × M8 nuts
Recommended tools:
3D-printer: https://www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427
All my project files, instructions, schematics, are provided for free so everyone around the world can enjoy them. Feel free to support me so I can create and share even more awsome projects. Any amount of support is greatly appreciated :-) paypal.me/BrianBrocken
Feel free to take a look at my other designs:
3D printable antweight battlebot: Bulldog: https://www.thingiverse.com/thing:4623536
SpaceX inspired edf rocket: https://www.thingiverse.com/thing:4606751
3D printed high torque servo/gearbox version 2: https://www.thingiverse.com/thing:4547703
UMC - Universal motion controller: https://www.thingiverse.com/thing:4245315
3D-printable Davinci catapult gift card: https://www.thingiverse.com/thing:4067668
Arduino controlled photogrammetry 3D-scanner: https://www.thingiverse.com/thing:3958326
Fully 3D-printable turntable: https://www.thingiverse.com/thing:3723618
RC FPV tank rover: https://www.thingiverse.com/thing:3587738
Fully 3D-printable wind-up car gift card: https://www.thingiverse.com/thing:3308710
3D-printable High torque servo/gear reduction: https://www.thingiverse.com/thing:3292860
'BOOM box' high voltage capacitor bank case: https://www.thingiverse.com/thing:2980012
Subby the interactive youtube subscriber robot: https://www.thingiverse.com/thing:2928254
robot hand || bionic hand prosthesis prototype: https://www.thingiverse.com/thing:2838239
3D-printable linear actuator: https://www.thingiverse.com/thing:2783959
Mini 3D-printable crossbow: https://www.thingiverse.com/thing:2710472
8 legged spider robot: https://www.thingiverse.com/thing:2470882
best 3D-printable bearing: https://www.thingiverse.com/thing:2349065
Have a nice day!
STL and Editable Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/3d-printable-linear-actuator-files
This linear actuator is almost completely 3D printed (except for the thread and some bolts, nuts and bearings).I curently don't have any position feedback or limited switches installed on it, I will add them in the feature when I'm going to integrate it in a projecct. It has a speed of about 25 mm/s on a 9V battery and draws about 1.7 Amps of curent. The motor is rated for 36 Volts. Running the linear actuator on a 36 Volt battery will increase the speed of the actuator. The transmission is a belt driven one wich uses a GT2 timing belt and a 3D printed GT2 pulley, This may not be the most ideal transmission for this task but it'll do for some testing. The linear actuator uses an M8 thread to convert the rotating motion into a linear motion. All parts (except for the 120 teeth pulley) are printed with a 1 mm nozle because there is no high accuracy required and it goes a lot faster. Some people are sceptic about using a 1mm nozzle but I think it's good for printing large objects like these without the need for accuracy. And it works great for me.
Video can be found here: https://www.youtube.com/watch?v=99aw_77oUvY
More info can be found here: https://hackaday.io/project/52706-3d-printable-linear-actuator
Components used:
1 × l298N motor driver
link: https://www.banggood.com/Wholesale-Dual-H-Bridge-DC-Stepper-Motor-Drive-Controller-Board-Module-Arduino-L298N-p-42826.html?p=E01411629100201406T1&custlinkid=255131
1 × Arduino nano V3
link: https://www.banggood.com/Geekcreit-ATmega328P-Nano-V3-Module-Improved-Version-With-USB-Cable-Development-Board-For-Arduino-p-933647.html?p=E01411629100201406T1&custlinkid=255135
1 × 775 electric motor 36 Volt
link: https://www.banggood.com/775-Gear-Motor-DC-12V-36V-3500-9000RPM-Motor-Large-Torque-High-power-Motor-p-1091058.html?rmmds=search&cur_warehouse=CN
1 × Pulley for motor side, 5mm bore, 16 teeth
link: https://www.banggood.com/162036T-GT2-Aluminum-Timing-Pulley-For-DIY-3D-Printer-p-1001266.html?p=E01411629100201406T1&custlinkid=669283
2 × 8mm inner diameter bearings
link: https://www.banggood.com/10pcs-8x19x6mm-Steel-Sealed-Shielded-Deep-Groove-Ball-Bearings-698ZZ-p-980204.html?rmmds=search&cur_warehouse=CN
1 × Gt2 timing belt 260-GT2-6https://www.robotdigg.com/product/283/260mm-264mm-268mm-280mm-288mm-or-294mm-gt2-endless-belt
1 × M8 thread rod
7 × M8 nuts
Recommended tools:
3D-printer: https://www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427
All my project files, instructions, schematics, are provided for free so everyone around the world can enjoy them. Feel free to support me so I can create and share even more awsome projects. Any amount of support is greatly appreciated :-) paypal.me/BrianBrocken
Feel free to take a look at my other designs:
3D printable antweight battlebot: Bulldog: https://www.thingiverse.com/thing:4623536
SpaceX inspired edf rocket: https://www.thingiverse.com/thing:4606751
3D printed high torque servo/gearbox version 2: https://www.thingiverse.com/thing:4547703
UMC - Universal motion controller: https://www.thingiverse.com/thing:4245315
3D-printable Davinci catapult gift card: https://www.thingiverse.com/thing:4067668
Arduino controlled photogrammetry 3D-scanner: https://www.thingiverse.com/thing:3958326
Fully 3D-printable turntable: https://www.thingiverse.com/thing:3723618
RC FPV tank rover: https://www.thingiverse.com/thing:3587738
Fully 3D-printable wind-up car gift card: https://www.thingiverse.com/thing:3308710
3D-printable High torque servo/gear reduction: https://www.thingiverse.com/thing:3292860
'BOOM box' high voltage capacitor bank case: https://www.thingiverse.com/thing:2980012
Subby the interactive youtube subscriber robot: https://www.thingiverse.com/thing:2928254
robot hand || bionic hand prosthesis prototype: https://www.thingiverse.com/thing:2838239
3D-printable linear actuator: https://www.thingiverse.com/thing:2783959
Mini 3D-printable crossbow: https://www.thingiverse.com/thing:2710472
8 legged spider robot: https://www.thingiverse.com/thing:2470882
best 3D-printable bearing: https://www.thingiverse.com/thing:2349065
Have a nice day!
Similar models
thingiverse
free
Subby the interactive youtube subscriber robot by Bribro12
...: https://www.thingiverse.com/thing:2470882
best 3d-printable bearing: https://www.thingiverse.com/thing:2349065
have a nice day!
thingiverse
free
SpaceX inspired edf rocket by Bribro12
...: https://www.thingiverse.com/thing:2470882
best 3d-printable bearing: https://www.thingiverse.com/thing:2349065
have a nice day!
thingiverse
free
3D printable antweight battlebot: Bulldog by Bribro12
...: https://www.thingiverse.com/thing:2470882
best 3d-printable bearing: https://www.thingiverse.com/thing:2349065
have a nice day!
thingiverse
free
robot hand || bionic hand prosthesis prototype by Bribro12
...old pens 1 × 1mm diameter steel rod or similar as shafts for the fingers 1 × nylon wire...
thingiverse
free
8 legged spider robot by Bribro12
...: https://www.thingiverse.com/thing:2470882
best 3d-printable bearing: https://www.thingiverse.com/thing:2349065
have a nice day!
grabcad
free
ZCarriageAssambly
...45
2 linear rails ø8x400
1 nema 17 motor support(50mm)
1 nema 17 motor
1 belt drive(gt2)
1 belt pulley(gt2)
1 belt pulley support
grabcad
free
Linear motion guide
...m (lightweight, 1.5mm thickness).
belt: gt2 760.
pulley: gt2 20 teeth.
stepper motor: nema17 18mm shaft.
bearings: 625zz x 2pcs.
grabcad
free
Linear Motion Guide 2020 (double precision)
...n ended (940mm)
pulley: gt2 16 teeth 2pcs, idle pulley gt2 (⌀9.7mm, w/o teeth) 2pcs
stepper motor: nema17
bearings: 625zz x 2pcs
thingiverse
free
Tantillus X & Y Idler Pulleys for GT2 Belts by Dignen
...er pulleys for gt2 belts by dignen
thingiverse
this lets you use gt2 belts combined with http://www.thingiverse.com/thing:359344
cults
$1
Belt Idler pulley GT2
...aring f605zz
smooth pulley in couple to it, it is possible to take here.
https://cults3d.com/en/3d-model/gadget/belt-idler-pulley
Bribro12
thingiverse
free
small turbo compresser by Bribro12
...small turbo compresser by bribro12
thingiverse
this compressor can be driven by my chain wich i also posted on thingverse
thingiverse
free
xinxun quadcopter gears by Bribro12
...xun quad becouse they were always stripped ,i decided to make my own .the gears have bigger teeths but the ratio seems to be fine
thingiverse
free
filement rol holder by Bribro12
...such practical use .and when you have printed the parts ,it just snaps together so you don't need anny glue .hope you like it
thingiverse
free
part of a chain by Bribro12
...pla .i haven't printed it yet with abs but i will try soon .it takes about 2 minutes to print on my printer .hope you like it
thingiverse
free
ducted fan for qinqun quad by Bribro12
...s you will also see an outher ring to protect the 12 bladed fan from impacts ,
this is also specialy designed for the qinqun quad
thingiverse
free
Drill Bit adapter for the 3D printed turntable by Bribro12 by BigProjects
...://www.thingiverse.com/thing:3723618 to simply attach the spinning handle to a drill for an easy to implement motorized platform.
thingiverse
free
hinges for flaps cessna 182 rc model by Bribro12
...s on a 3 meter span wing of a cessna 182 rc model .i use 3 sets of hinges (1 dubbel, one single ) for one flap .
hope you like it
thingiverse
free
3D-printable shredder by Bribro12
...: https://www.thingiverse.com/thing:2470882
best 3d-printable bearing: https://www.thingiverse.com/thing:2349065
have a nice day!
thingiverse
free
Mini 3D-printable crossbow by Bribro12
...: https://www.thingiverse.com/thing:2470882
best 3d-printable bearing: https://www.thingiverse.com/thing:2349065
have a nice day!
thingiverse
free
UMC - Universal motion controller by Bribro12
...: https://www.thingiverse.com/thing:2470882
best 3d-printable bearing: https://www.thingiverse.com/thing:2349065
have a nice day!
Actuator
turbosquid
$5
Linear Actuator
...
royalty free 3d model linear actuator for download as blend on turbosquid: 3d models for games, architecture, videos. (1589061)
turbosquid
$2
pneumatic actuator
...l pneumatic actuator for download as 3ds, obj, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1333375)
3d_export
free
valve pneumatic actuator housing
...valve pneumatic actuator housing
3dexport
turbosquid
$1
Garrett GT2860R Turbocharger - Wastegate Actuator
...- wastegate actuator for download as ige, obj, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1259740)
3d_export
$10
hps hydraulic disc brake device brake actuator 4 specifications
...ic disc brake device brake actuator 4 specifications
3dexport
hps hydraulic disc brake device, brake actuator (4 specifications)
turbosquid
$16
(Project) Food packing helper machine with holding clamp and press table driven by an actuator
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$25
hydraulic cylinder
...(also called a linear hydraulic motor) is a mechanical actuator that is used to give a unidirectional force through...
3d_export
$5
automatic gluing machine
...power system (power source), sensor detection system (sensor), and actuator system (such as...
3d_export
$20
si cantik cargo plane for humanity medicine kit
...and the ground. control system. in addition, as an actuator on the control surface and system release cargo in...
3d_export
$5
3D MOTORCYCLE DISC BRAKE MOTORBIKE model
... the components include the disc, master cylinder, caliper (which contains cylinder and two brake pads) on both sides of the disc
Linear
3ddd
$1
Linear Diffusers
...linear diffusers
3ddd
диффузор
set of linear diffusers for ceiling.
design_connected
$27
Linear Sofa
...linear sofa
designconnected
scp linear sofa computer generated 3d model.
design_connected
$18
Atlantis linear
...atlantis linear
designconnected
terzani atlantis linear pendant lights computer generated 3d model. designed by barlas baylar.
3d_export
$5
light linear unit
...light linear unit
3dexport
light linear unit
turbosquid
$5
Linear Actuator
...
royalty free 3d model linear actuator for download as blend on turbosquid: 3d models for games, architecture, videos. (1589061)
turbosquid
$29
Linear panel
...oyalty free 3d model linear panel for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1391254)
turbosquid
$12
Linear Chandelier
...y free 3d model linear chandelier for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1574289)
turbosquid
$10
Grohe Lineare
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Linear Unit 3D Model
...linear unit 3d model
3dexport
linear unit force torque velocity
linear unit 3d model fau 71218 3dexport
Printable
turbosquid
$5
printable giraffe
...uid
royalty free 3d model printable giraffe for download as on turbosquid: 3d models for games, architecture, videos. (1504825)
turbosquid
$49
Longhorn Printable
...
royalty free 3d model longhorn printable for download as stl on turbosquid: 3d models for games, architecture, videos. (1712930)
3d_export
$2
printable audi car
...printable audi car
3dexport
printable audi car
turbosquid
$40
Fox printable
...lty free 3d model fox printable for download as blend and stl on turbosquid: 3d models for games, architecture, videos. (1507558)
turbosquid
$23
Printable Statue
...ty free 3d model printable statue for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1415137)
turbosquid
$3
Ear Printable
...yalty free 3d model ear printable for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1671689)
turbosquid
$1
heart printable
...y free 3d model heart printable for download as stl and sldpr on turbosquid: 3d models for games, architecture, videos. (1209566)
turbosquid
$1
Printable Hook
...
royalty free 3d model 3d printable hook for download as stl on turbosquid: 3d models for games, architecture, videos. (1413683)
turbosquid
$30
Printable support
... model 3d printable support for download as max, 3ds, and stl on turbosquid: 3d models for games, architecture, videos. (1689342)
turbosquid
$24
Printable Dolphin
...el printable dolphin for download as , dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1602353)