3D Player board for Gloomhaven - Modular by Timelinker

Last crawled date: 3 years, 1 month ago

My take on a player board for Gloomhaven. It is made of several pieces that assemble like a puzzle to the main part. Except for the active card holder that needs to be slided directly onto the life and exp counter.
The modular design allow it to be printed on small printer (you'll need at least 175mm in one direction though), also you can choose not to print a part of it if it is not to your liking. And it makes it easier for potential design improvements or changes for the upcoming Frosthaven ;)
I use it without sleeves, but it may work with sleeves too as I used quite much clearance everywhere. I'll be happy to get some feedback :)
There is room under the character tile for your reserve cards (card pool, items). And you can also store the level up cards there if you want.
I needed to polish some of the parts before assembly, so that they fit well together. I suspect this was due to the imprecision of using a big nozzle (0.8mm). Hopefully you will not need to, as it was designed with much clearance everywhere.
No supports needed.
Have fun :)