Thingiverse
3,5'' home automation console with Raspberry Pi Zero WH by esra
by Thingiverse
Last crawled date: 4 years, 2 months ago
Here my console for my expanding openhab home automation.
It is based on a waveshare RPi 3.5inch LCD and a Raspberry Pi Zero WH.
You need no soldering, as long as you find a not so huge micro-USB-Plug.
You can print the main body in up right position.
Passepartout comes extra. Could not avoid it, but on the other hand you can now have a two color design.
Update, 17.06.2018:Finally the back lid/door is available now.
I use four neodymium magnets with 4mm diameter and 1,5mm height to hold the lid closed.
(I ran off silver filament, so the the lid is black for the moment.)
It is based on a waveshare RPi 3.5inch LCD and a Raspberry Pi Zero WH.
You need no soldering, as long as you find a not so huge micro-USB-Plug.
You can print the main body in up right position.
Passepartout comes extra. Could not avoid it, but on the other hand you can now have a two color design.
Update, 17.06.2018:Finally the back lid/door is available now.
I use four neodymium magnets with 4mm diameter and 1,5mm height to hold the lid closed.
(I ran off silver filament, so the the lid is black for the moment.)