34W Emergency Fluorescent Light - 2' 2 Lamp - Emergency Battery Backup - ATEX/IECEx - 24V

Last crawled date: 1 year, 11 months ago

https://www.larsonelectronics.com/product/264975/34w-emergency-fluorescent-light-2-2-lamp-emergency-battery-backup-atex-iecex-24v

The ATEX-HALP-EMG-24-2L-T8-24V Hazardous Area Fluorescent Light Fixture from Larson Electronics is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This emergency light fixture is specifically designed to handle the rigors of wet and corrosive marine environments, and comes equipped with an added battery backup providing 3 hours of emergency runtime. The ATEX-HALP-EMG-24-2L-T8-24V operates on 24 V.

The ATEX-HALP-EMG-24-2L-T8-24V hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This ATEX/IECEx rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant polycarbonate lens. Corrosion resistant plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is ATEX/IECEx approved for Zones 1 and 2, and 21 and 22. The HALP-EMG-48-2L-T8 also carries a T4 temperature rating.

This fluorescent light works, mounts and is wired like our ATEX-HALP-24-2L explosion proof fluorescent light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area emergency light will run the standard UL suggested 3 hours after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 900 lumens for 3 hours. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode.

Surface Mounting: Flange type aluminum mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture.

Pendant Mounting: This light fixture can hang from the ceiling suspected by rigid pipe. Each fixture is equipped with either two 1/2", 3/4" NPT hubs, M20, or M25 hubs on either side of this fluorescent lamp. Operators will bring rigid pipe down to the threaded mounting ups. The wiring is fed down through the rigid pipe to one of the NPT hubs and tied to the fixture`s lead wires to complete the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture.

Suggested Applications: The ATEX-HALP-EMG-24-2L-T8-24V is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.