GrabCAD
30W C1D2 LED Traffic Signal Stack Light - Multiple Color Options - Non-Metallic -Corrosion Resistant
by GrabCAD
Last crawled date: 2 years ago
http://www.larsonelectronics.com/p-69041-30w-c1d2-led-traffic-signal-stack-light-multiple-color-options-non-metallic-corrosion-resistant.aspx
Made in the USA
The HAL-TL-3X10W-C Class I Division 2 Chemical Resistant LED Traffic Light from Larson Electronics is chemical resistant and approved for use in wet locations and marine environments. This waterproof LED equipped light is designed for use in industrial refueling stations and areas where trucks and equipment pick up or deposit hazardous materials.
The powerful and durable HAL-TL-3X10W-C explosion proof LED light from Larson Electronics is an ideal indicator lighting solution for for industrial refueling stations and areas where trucks and equipment pick up or deposit hazardous materials. The housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globes, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This LED traffic lamp has a 50,000 hour operational life and is available in 120-277V AC or 11/25V AC/DC configurations for high or low voltage operation.
This hazardous area LED light carries a T2D temperature rating and has a -29°C to 40°C (-29°F to 104°F) operating temp range. The HAL-TL-3X10W-C is Class I Division 2 approved, carries UL 1570/1571 and UL 595 compliance, and is waterproof and suitable for spray down areas and marine locations. Power is provided by three cords equipped with straight blade plugs to allow independent operation of each lamp, making this unit ideal for fuel depots where stop and go indicators are necessary. This LED light carries UL and CSA certification, USCG acceptance, UL approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas.
This explosion proof fixture is configured for red, yellow and green output (one lamp each color) or for yellow, amber and red output (specify color scheme below when ordering) offers exceptional lumen output, a 50,000+ hour life span, and the lamps are protected by Pyrex globes and polycarbonate globe guards. The LED lamps in this traffic light are 10 watts each and offer cool operation and clean bright output that surpasses that of 100 watt incandescent indicator lamps. The HAL-TL-3X10W-C is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal, and is ideal for locations where these hazardous compounds are commonly encountered. Mounting is provided by a heavy gauge aluminum base with four predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment.
Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations.
Voltages: 120-240VAC 50/60Hz or 12-24VDC
Temp Code: Class 1 T2D 215°C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.)
Made in the USA
The HAL-TL-3X10W-C Class I Division 2 Chemical Resistant LED Traffic Light from Larson Electronics is chemical resistant and approved for use in wet locations and marine environments. This waterproof LED equipped light is designed for use in industrial refueling stations and areas where trucks and equipment pick up or deposit hazardous materials.
The powerful and durable HAL-TL-3X10W-C explosion proof LED light from Larson Electronics is an ideal indicator lighting solution for for industrial refueling stations and areas where trucks and equipment pick up or deposit hazardous materials. The housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globes, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This LED traffic lamp has a 50,000 hour operational life and is available in 120-277V AC or 11/25V AC/DC configurations for high or low voltage operation.
This hazardous area LED light carries a T2D temperature rating and has a -29°C to 40°C (-29°F to 104°F) operating temp range. The HAL-TL-3X10W-C is Class I Division 2 approved, carries UL 1570/1571 and UL 595 compliance, and is waterproof and suitable for spray down areas and marine locations. Power is provided by three cords equipped with straight blade plugs to allow independent operation of each lamp, making this unit ideal for fuel depots where stop and go indicators are necessary. This LED light carries UL and CSA certification, USCG acceptance, UL approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas.
This explosion proof fixture is configured for red, yellow and green output (one lamp each color) or for yellow, amber and red output (specify color scheme below when ordering) offers exceptional lumen output, a 50,000+ hour life span, and the lamps are protected by Pyrex globes and polycarbonate globe guards. The LED lamps in this traffic light are 10 watts each and offer cool operation and clean bright output that surpasses that of 100 watt incandescent indicator lamps. The HAL-TL-3X10W-C is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal, and is ideal for locations where these hazardous compounds are commonly encountered. Mounting is provided by a heavy gauge aluminum base with four predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment.
Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations.
Voltages: 120-240VAC 50/60Hz or 12-24VDC
Temp Code: Class 1 T2D 215°C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.)
Similar models
grabcad
free
50 Watt Class 1, Division 2 LED Traffic Light - Red, Green, Blue, Amber, White - Strobe or Steady
...ass 1 t2d 215°c° c (do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.)
grabcad
free
Class 1, Division 2 LED Traffic Light- 20 Watts - Non-Metallic - Corrosion Resistant
... or low voltage configurations. please contact us for special color configurations.
voltages: 120-277vac 50/60hz or 11-25v ac/dc
grabcad
free
Hazardous Location Signal Light w/ Audible Alarm - Class 1 Div 2 - 4 Colors Avail - Steady or Strobe
...dy burn or strobing led lamps, as well as high or low voltage configurations. please contact us for special color configurations.
grabcad
free
Hazardous Location Signal Light w/ Audible Alarm - Class 1 Div 2 - 4 Colors Avail - Steady or Strobe
...dy burn or strobing led lamps, as well as high or low voltage configurations. please contact us for special color configurations.
grabcad
free
Compact 7 Watt LED Fixture for Hazardous Area Location Lighting - Aluminum Housing - 12-24VDC - C1D2
...lens, this fixture produces a higher light output than similar fixtures equipped with thicker glass lenses. the hal-7w-led has...
grabcad
free
50W Hazardous Location Stack Light - Signal Traffic Light - Red, Blue, Amber, Green, White - C1D2
...dy burn or strobing led lamps, as well as high or low voltage configurations. please contact us for special color configurations.
grabcad
free
Explosion Proof Traffic Light - Class 1 & Class 2 Signal Stack Light - Red, Yellow, Green Stop & Go
...color configurations.
voltages: 120-277vac 50/60hz, 11-25v ac/dc
temp code: class 1 t3c groups c,d : class 2 - t3c groups e,f,g
grabcad
free
33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2
...ications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
grabcad
free
31 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Class 1 Division 2 Approved
...cessing, and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
grabcad
free
Explosion Proof Traffic Light - Class 1 & Class 2 Signal Stack Light - Blue, Red, Yellow, & Green
...se contact us for special color configurations.
voltages: 120-277vac 50/60hz or 12-24vdc
temp code: class 1 t3c, class 2 - t3
C1D2
grabcad
free
Stainless Steel Hazardous Location Junction Box - C1D2 - Flanged Backplate Mount - Type 4X
...ater treatment plants, coal plants, gas facilities and any other hazardous location where an explosion proof enclosure is needed.
grabcad
free
Hazardous Location Exit Sign - C1D2 - C2D1&2 - IP65 - 120V/277VAC - Green or Red Exit Sign
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
Internal Photocell - C1D2 - Dusk to Dawn Sensor for Light Fixtures - 10 Second Time Delay
...nclosure of the unit must be installed within an appropriate enclosure. for independent units, please contact larson electronics.
grabcad
free
Stainless Steel Hazardous Location Junction Box - C1D2 - Flanged Backplate Mount - Type 4X - (6) Total Hubs
...ater treatment plants, coal plants, gas facilities and any other hazardous location where an explosion proof enclosure is needed.
grabcad
free
Hazardous Location Emergency Exit Sign - C1D2 - Battery Backup - 120V/277VAC - Red or Green
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
Hazardous Location Emergency Exit Sign - C1D2 - Battery Backup - 120V/277VAC - Red or Green
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
Stainless Steel Hazardous Location Junction Box - C1D2 ATEX/IECEx Rated - 24" x 24" x 8" - IP66/Type 4X
...ater treatment plants, coal plants, gas facilities and any other hazardous location where an explosion proof enclosure is needed.
grabcad
free
33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2
...ications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
grabcad
free
Compact 7 Watt LED Fixture for Hazardous Area Location Lighting - Aluminum Housing - 12-24VDC - C1D2
... food processing, and industrial operations with hazardous location classification where wet conditions are commonly encountered.
30W
grabcad
free
TPA3110 30W+30W Audio Amplifier
...tpa3110 30w+30w audio amplifier
grabcad
measured manually, size may vary +-0.5mm
grabcad
free
Reflector LED 30W
...reflector led 30w
grabcad
reflector led 30w
grabcad
free
LASER CO2 30W
...laser co2 30w
grabcad
laser co2 30w
grabcad
free
CNC laser 30W
...cnc laser 30w
grabcad
aluminium cnc laser 30w
grabcad
free
30W Transformer - Tranformador
...30w transformer - tranformador
grabcad
pequeño transformador de 30w - transformer
grabcad
free
Den LED BULB 30W
...den led bulb 30w
grabcad
den led bulb 30w
grabcad
free
LED DOB-30W(50W)
...led dob-30w(50w)
grabcad
fito led dob-30w(50w)
grabcad
free
30W LED Light
...30w led light
grabcad
led light
grabcad
free
LED projector 30W
...iek ltd. model built from the catalogue page.
nominal voltage: 230 vac
colour temp.: 6500 k
protection: ip65
light flow: 2100 lm
grabcad
free
30W Coaxial Attenuator
...30w coaxial attenuator
grabcad
fully detailed model of a coaxial rf attenuator.
Traffic
grabcad
free
Traffic
...traffic
grabcad
traffic cylinder
grabcad
free
Traffic
...traffic
grabcad
a traffic cone
grabcad
free
Traffic Cone
...traffic cone
grabcad
traffic cones are used redirect on road traffic, model created in solidworks
grabcad
free
TRAFFIC CONE
...traffic cone
grabcad
traffic cone
grabcad
free
Traffic Signal
...traffic signal
grabcad
traffic signals
grabcad
free
Traffic cone
...traffic cone
grabcad
this a traffic cone
grabcad
free
Rotary traffic
...rotary traffic
grabcad
traffic sign
grabcad
free
Traffic light
...traffic light
grabcad
traffic light
grabcad
free
traffic cone
...traffic cone
grabcad
traffic cone
grabcad
free
Traffic Light
...traffic light
grabcad
traffic light
Corrosion
grabcad
free
corrosion cell unit
...corrosion cell unit
grabcad
this cell tests the corrosion rate in metal corrosion systems
grabcad
free
Corrosion Coupon Rack
...corrosion coupon rack
grabcad
corrosion monitoring system
grabcad
free
Piping Corrosive Liquids
...piping corrosive liquids
grabcad
3 inches piping for corrosive liquids. "application for tanks and semi-trailers.
grabcad
free
corrosion pipe robot
...corrosion pipe robot
grabcad
robot can be check a corrosion of pipe with receiver signal help us solve problem.
grabcad
free
2 inch Corrosion Probe
...2 inch corrosion probe
grabcad
2 inch corrosion probe for checking corrosion problems in natural gas pipelines.
grabcad
free
Piping for corrosive liquids
...uids
grabcad
piping trucks semi-treiler
3 inches piping for corrosive liquids. "application for tanks and semi-trailers.
grabcad
free
Erosion-corrosion flow pump
...osion-corrosion flow pump
grabcad
the design of this machine is monitor and study the rate and effect of corrosion at the elbows
grabcad
free
Label Corrosion Hazard
...label corrosion hazard
grabcad
just an other one.
grabcad
free
CORROSION INHIBITOR TANK (SS316L)
...also be used. these molecules will adsorb to the surface of steel and block other molecules from coming in contact with the steel
grabcad
free
corrosion fatigue dispositif
...fatigue dispositif
grabcad
a small dispositif for testings metals en fatigue corrsion behaviour by 3 points cyclic bending tests
Stack
grabcad
free
Stack
...stack
grabcad
stack it.....
grabcad
free
stack
...stack
grabcad
stack
grabcad
free
STACK
...stack
grabcad
stack
grabcad
free
stacked
...stacked
grabcad
get stacked dude
grabcad
free
STACK ASSEMBLY
...stack assembly
grabcad
stack assembly for box stacking
grabcad
free
stack
...stack
grabcad
1203
grabcad
free
stack reclaimer
...stack reclaimer
grabcad
stack reclaimer
grabcad
free
Smoke Stack
...smoke stack
grabcad
smoke stack
grabcad
free
vacuum stacking
...vacuum stacking
grabcad
vacuum stacking
grabcad
free
stack Ø2.5x40.0m
...stack ø2.5x40.0m
grabcad
carbon stack
Signal
grabcad
free
signal
...signal
grabcad
signal
grabcad
free
Railways Signal (Double Signal)
...railways signal (double signal)
grabcad
railways signal (double signal)
grabcad
free
Signal lights
...signal lights
grabcad
signal lights
grabcad
free
Signal Lamp
...signal lamp
grabcad
signal lamp
grabcad
free
Traffic Signal
...traffic signal
grabcad
traffic signals
grabcad
free
signal assembly
...signal assembly
grabcad
signal assembly
grabcad
free
Traffic signal
...traffic signal
grabcad
traffic signal
grabcad
free
signal stand
...signal stand
grabcad
signal stand
grabcad
free
Enseigne (signal)
...enseigne (signal)
grabcad
enseigne (signal)
grabcad
free
signal room
...signal room
grabcad
signal room
Multiple
grabcad
free
Multiple
...multiple
grabcad
multi-tomas
grabcad
free
multiplate clutch
...multiplate clutch
grabcad
multiplate clutch
grabcad
free
Multiplate Clutch
...multiplate clutch
grabcad
multiplate clutch
grabcad
free
PENDULE MULTIPLE
...pendule multiple
grabcad
pendule multiple
grabcad
free
POLEA MULTIPLE
...polea multiple
grabcad
polea de multiple
grabcad
free
Multiplate Clutch
...multiplate clutch
grabcad
complete design of multiplate clutch
grabcad
free
Multiple Gearing
...multiple gearing
grabcad
siemens nx 10 - simulate dynamic motion - multiple gearing
grabcad
free
Multiplate Clutch
...multiplate clutch
grabcad
unfinished project of rough multiplate clutch made in autodesk inventor.
grabcad
free
Multiple Designs
...multiple designs
grabcad
multiple designs made in solidworks as a class home work. every week.
grabcad
free
Foundations-Multiple
...ltiple
www.kem4design.com
contact us for engineering drawings (concept to detailed)
kem@kem4design.com
http://wa.me/971543680101
Resistant
grabcad
free
Resistance SMD and Pack Resistance
...resistance smd and pack resistance
grabcad
smd resistance and resistance pack or resistance network
grabcad
free
resistance
...resistance
grabcad
resistance molprex
grabcad
free
Resistance
...resistance
grabcad
generic resistance for breadboard
grabcad
free
resistence
...resistence
grabcad
resistence for plastic injection machine
grabcad
free
Resistance
...resistance
grabcad
1 kw resistance
length: 28 cm
material: cr-ni
enjoy!
grabcad
free
Resistance
...resistance
grabcad
sw2017
grabcad
free
Resistance
...resistance
grabcad
heating water
grabcad
free
Resistance Thru
...resistance thru
grabcad
thru resistance
grabcad
free
resistance (Rezistans)
...resistance (rezistans)
grabcad
resistance (rezistans)
grabcad
free
Resistance Jig
...resistance jig
grabcad
resistance jig
Non
grabcad
free
non
...non
grabcad
non
grabcad
free
Non
...non
grabcad
no thank you
grabcad
free
Non BH
...non bh
grabcad
non bh
grabcad
free
Non-returnvalve
...non-returnvalve
grabcad
design
grabcad
free
non structures
...non structures
grabcad
try different!!!
grabcad
free
Non Return Valve
...non return valve
grabcad
non return valve
grabcad
free
Non Return Valve
...non return valve
grabcad
non return valve
grabcad
free
non return valve
...non return valve
grabcad
non return valve
grabcad
free
NON RETURN VALVE
...non return valve
grabcad
non return valve
grabcad
free
NON RETURN VALVE
...non return valve
grabcad
non return valve
Options
grabcad
free
Option
...option
grabcad
option
grabcad
free
Mold Base with Optional Hot Drop Option
...nclude a hot tip for higher temp materials. mold includes blank customizable inserts to allow for the design of multiple objects.
grabcad
free
Rack Option 2
...rack option 2
grabcad
rack option 2
grabcad
free
base surface options
...base surface options
grabcad
base surface options
grabcad
free
Drone Assembly Options
...drone assembly options
grabcad
drone assembly options
grabcad
free
Deck option
...deck option
grabcad
deck design for suredeck system
grabcad
free
Base option 2
...base option 2
grabcad
second option for the base part
grabcad
free
Yoyo Option 1
...yoyo option 1
grabcad
yoyo option 1 as defined by the blog
grabcad
free
Vertical C-Beam options
...vertical c-beam options
grabcad
vertical c-beam options
grabcad
free
Toggle latch with locking option
...toggle latch with locking option
grabcad
toggle latch with locking option
Color
grabcad
free
colors
...colors
grabcad
colors
grabcad
free
colorful
...colorful
grabcad
cam
grabcad
free
colors
...colors
grabcad
visualization by only rendering
grabcad
free
Colorful Light
...colorful light
grabcad
this light has colored glass. there are different colors at each angle.
grabcad
free
colorful cube
...colorful cube
grabcad
colorful cube
grabcad
free
colorful cube
...colorful cube
grabcad
colorful cube
grabcad
free
Color Test
...color test
grabcad
color test
grabcad
free
Color Pencil
...color pencil
grabcad
color pencil
grabcad
free
Coloring Pencil
...coloring pencil
grabcad
coloring pencil.
grabcad
free
COLOR LOGO
...color logo
grabcad
color logo
Led
grabcad
free
LED
...led
grabcad
led
grabcad
free
LED
...led
grabcad
led
grabcad
free
Led
...led
grabcad
led
grabcad
free
LED
...led
grabcad
led
grabcad
free
led
...led
grabcad
led
grabcad
free
LED
...led
grabcad
led
grabcad
free
LED
...led
grabcad
led
grabcad
free
LED
...led
grabcad
led
grabcad
free
LED
...led
grabcad
leds
grabcad
free
Led
...led
grabcad
led
Light
grabcad
free
Light
...light
grabcad
light
grabcad
free
LIGHT
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
Metallic
grabcad
free
metal
...metal
grabcad
metal
grabcad
free
Metal Satranç / Metal Chess
...metal satranç / metal chess
grabcad
metal satranç / metal chess
grabcad
free
Metal Art Metal Man
...metal art metal man
grabcad
metal art metal man
grabcad
free
metal bench -metal bank
...metal bench -metal bank
grabcad
metal bench -metal bank
grabcad
free
Mate metal / Metal Cup
...mate metal / metal cup
grabcad
its used for drinking mate, in argentina and its made of metal.
grabcad
free
Metal Aralayıcı (Metal Spacer)
...metal aralayıcı (metal spacer)
grabcad
this thing for make gap between two metal, wood or plastic parts.
grabcad
free
Metal Football Layer - Metal Futbolcu
... - metal futbolcu
i designed with catia v5; metal football player figurine.
catia v5 ile tasarladığım ; metal futbolcu biblosu.
grabcad
free
Metal Screw
...metal screw
grabcad
metal screw with metal - like colour.
grabcad
free
Metal Rivet
...metal rivet
grabcad
metal rivet with metal - like colour.
grabcad
free
Metal Washer
...metal washer
grabcad
metal ring applied in metal structures