30A PSU Cover w/ Plug and Switch by truglodite

Last crawled date: 3 years, 1 month ago

I made this for an upgraded 30A PSU I bought for my Anet A8 Lack enclosure. There are many similar things available, but they either were missing the switch screw holes, were too small, or didn't have the hole in the place I wanted. It fits a standard format 30A PSU (Prusa i3, eTopxizu, etc...):https://www.amazon.com/eTopxizu-Universal-Regulated-Switching-Computer/dp/B00D7CWSCG
...and a standard IEC receptacle/fuse/switch combo:https://www.amazon.com/Inlet-Module-Switch-Socket-IEC320/dp/B00F4MFMXE
A 10mm radius hole is provided to pass DC cables to fets, mainboard, etc.
I printed in ABS and everything fits perfectly. Printing with supports is actually optional. I recommend no supports if your printer can handle the bridging the switch gap with only a few sagging layers. That gap doesn't have to be super clean since it gets covered by the switch screw flange anyways. ;)
Enjoy