Thingiverse
3030 Mounted filament cleaner / wiper by FischOderAal
by Thingiverse
Last crawled date: 4 years, 4 months ago
I was looking for a filament cleaner and found the one created by Thomllama for 2020 extrusions. I modified the base to fit a 3030 extrusion.
After printing it it was quite loose on the extrusion so I feared it might slide around all the time, but this is not the case. Anyway, I also created a version that can be tightened down with a hammerhead nut and a M6x8 screw. I used angles greater or equal to 30° so you do not need supports.
Take the bolt and the arm from Thomllama's thing.
After printing it it was quite loose on the extrusion so I feared it might slide around all the time, but this is not the case. Anyway, I also created a version that can be tightened down with a hammerhead nut and a M6x8 screw. I used angles greater or equal to 30° so you do not need supports.
Take the bolt and the arm from Thomllama's thing.