Thingiverse
30 Tooth Gear - Multi Products gearmotor Spec. 1113 first stage, by Swiftfingers
by Thingiverse
Last crawled date: 4 years ago
This is a replacement gear for the first stage in a spec 1113 multi products gearmotor, mine was out of an old jukebox. It may fit other multi products gearboxes.
The original gear was made of fiberglass, so I feel 3d-printed ABS should be sufficient.
I have tested it in the gearbox pictured with no problems, even at stall torque there is no slipping or stripping.
Printed in a Stratasys Dimension 1200ES.
Multi Products model 400 AC engineering drawing: https://www.multiproducts.com/sites/default/files/Mod-400-AC_0.pdf
The original gear was made of fiberglass, so I feel 3d-printed ABS should be sufficient.
I have tested it in the gearbox pictured with no problems, even at stall torque there is no slipping or stripping.
Printed in a Stratasys Dimension 1200ES.
Multi Products model 400 AC engineering drawing: https://www.multiproducts.com/sites/default/files/Mod-400-AC_0.pdf