Thingiverse
2x2 X-Cube / 2x2 Cross Cube Twisty Puzzle by kequals
by Thingiverse
Last crawled date: 4 years, 1 month ago
Because DaneC hasn't mass-produced his 2x2 X-Cube yet, I decided to make my own. I only printed the X-Cube variation, but the cross cube mechanism is nearly identical and I have included both sets of files.
To make the 2x2 X-Cube print the following:
1 X_Alignment
4 X_Corner1
3 X_Corner2
9 Edge
3 Center
16 Extension
To make the 2x2 Cross Cube print the following:
1 Cross_Alignment
7 Cross_Corner
9 Edge
3 Center
24 Extension
You need 3 M3 screws and 3 springs. You can buy them here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The 17mm screws I used were too long, so I ground them down to 12mm. Make sure to leave some of the screw's thread left, or else it won't work.
Standard 2x2 stickers can be used.
To make the 2x2 X-Cube print the following:
1 X_Alignment
4 X_Corner1
3 X_Corner2
9 Edge
3 Center
16 Extension
To make the 2x2 Cross Cube print the following:
1 Cross_Alignment
7 Cross_Corner
9 Edge
3 Center
24 Extension
You need 3 M3 screws and 3 springs. You can buy them here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The 17mm screws I used were too long, so I ground them down to 12mm. Make sure to leave some of the screw's thread left, or else it won't work.
Standard 2x2 stickers can be used.