GrabCAD
240 Watt Strobing Infrared LED Light Emitter - 25hz IR Strobe - 750NM, 850NM, 940NM - 9-42VDC - IP68
by GrabCAD
Last crawled date: 1 year, 11 months ago
http://www.larsonelectronics.com/p-105754-240-watt-strobing-infrared-led-light-emitter-25hz-ir-strobe-750nm-850nm-940nm-9-42vdc-ip68.aspx
Buy American Compliant
The Larson Electronics LEDLB-80X2E-IR-25HZ Strobing Infrared LED Light Bar offers high infrared 25Hz infrared strobing light output and extreme durability combined with versatile mounting and power options. This IP68 rated LED light bar produces an infrared light beam that can only be seen through the use of night vision goggles. 850Nm versions have a very slight red glow around the LED emitters when viewed from a certain angle while 940Nm versions are completely invisible to the naked eye. This strobe light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal for use in commercial and industrial security applications as well as military environments.
Click here to see the LED version of this
The LEDLB-80X2E-IR-25HZ Strobing Infrared LED light bar from Larson Electronics produces light in the infrared 750Nm, 850Nm, or 940Nm end of the light spectrum depending upon the version selected. Eighty Edison Edixeon® Infrared Emitters containing CREE EZBright® three watt LEDs are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused, 1,750 foot long by 300 foot wide infrared spot beam with limited spread or light spillage. We offer optional floodlight versions of this light that have 35 degree optics to produce a wider beam spread and more infrared light over a larger area nearer the fixture. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Mounting: Larson Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle placement of the light. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Buy American Compliant
The Larson Electronics LEDLB-80X2E-IR-25HZ Strobing Infrared LED Light Bar offers high infrared 25Hz infrared strobing light output and extreme durability combined with versatile mounting and power options. This IP68 rated LED light bar produces an infrared light beam that can only be seen through the use of night vision goggles. 850Nm versions have a very slight red glow around the LED emitters when viewed from a certain angle while 940Nm versions are completely invisible to the naked eye. This strobe light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal for use in commercial and industrial security applications as well as military environments.
Click here to see the LED version of this
The LEDLB-80X2E-IR-25HZ Strobing Infrared LED light bar from Larson Electronics produces light in the infrared 750Nm, 850Nm, or 940Nm end of the light spectrum depending upon the version selected. Eighty Edison Edixeon® Infrared Emitters containing CREE EZBright® three watt LEDs are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused, 1,750 foot long by 300 foot wide infrared spot beam with limited spread or light spillage. We offer optional floodlight versions of this light that have 35 degree optics to produce a wider beam spread and more infrared light over a larger area nearer the fixture. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Mounting: Larson Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle placement of the light. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Similar models
grabcad
free
IR LED Light Bar - 240 Watts - 80 LEDs -1750'L X 300'W Beam - Extreme Environment
...200x2 or multiple function led lights (i.e. high/low beam, modulating, ir/visible combos) will have different deutsch connectors.
grabcad
free
Infrared LED Light Emitter - 160, 3-Watt LEDs - 9-42V - 2350'L X 450'W Beam - 750nm, 850nm or 940nm
...ars come standard with amp connectors instead of the deutsch connector commonly found on various larson electronics led emitters.
grabcad
free
240 Watt LED Light Emitter - 80 LEDs - Visible /Infrared Combo. Light - 1750' X 300'
...200x2 or multiple function led lights (i.e. high/low beam, modulating, ir/visible combos) will have different deutsch connectors.
grabcad
free
400 Watt Ultraviolet LED Emitter - 365NM - 80 UV LEDs - NDT - 9-42VDC - Extreme Environment
... µw/cm²) in a spot configuration measured at 12".
118 mw/cm² (118,000 µw/cm²) in a flood configuration measured at 12".
grabcad
free
LED Light Emitter - 160 LEDs - 480 Watts - 40 X 4 Array - IP68 - Extreme Environment
...ars come standard with amp connectors instead of the deutsch connector commonly found on various larson electronics led emitters.
grabcad
free
48W IR LED Light Bar - 1550Nm - 80 LEDs - 1750'L X 300'W Beam - Extreme Environment - IP68
...200x2 or multiple function led lights (i.e. high/low beam, modulating, ir/visible combos) will have different deutsch connectors.
grabcad
free
Ultraviolet LED Light Emitter - 160 3-Watt LEDs - 9-42V - 2350'L X 450'W Beam - 400NM
...ars come standard with amp connectors instead of the deutsch connector commonly found on various larson electronics led emitters.
grabcad
free
LED Emitter - 80 LEDs - 20 x 4 LED Array - 14,400 Lumen - 1750'L x 300'W Beam - Extreme Environment
...200x2 or multiple function led lights (i.e. high/low beam, modulating, ir/visible combos) will have different deutsch connectors.
3dwarehouse
free
IR emitter
...ectronics. 940nm 20 degree viewing angle. http://media.digikey.com/pdf/data%20sheets/sharp%20pdfs/gl100mn1mpx.pdf #ir_emitter_led
grabcad
free
Compact Visible / Infrared Combination LED Light - Stud Mount - 9-48V
...200x2 or multiple function led lights (i.e. high/low beam, modulating, ir/visible combos) will have different deutsch connectors.
750Nm
grabcad
free
Gear coupling
...gear coupling grabcad gear coupling-2 750nm d=30mm according to gost r...
grabcad
free
Infrared LED Light Emitter - 160, 3-Watt LEDs - 9-42V - 2350'L X 450'W Beam - 750nm, 850nm or 940nm
...ars come standard with amp connectors instead of the deutsch connector commonly found on various larson electronics led emitters.
cg_trader
$15
Thunder Child
...fuel tanks of 5,000+l allowing a range of over 750nm ...
grabcad
free
Compact Visible / Infrared Combination LED Light - Stud Mount - 9-48V
...one infrared emitter producing an ir beam in the 750nm 850nm or 940nm wavelength are combined with high purity...
grabcad
free
Infrared LED Light - 6 watts stud mount - 9-48v - 750/850/940nm
...ranging from 9 to 48 volts dc. ir wavelength: 750nm 850nm or 950nm most larson electronics ledlb and led10w...
grabcad
free
EMMA (Elegant Methodical Maidenly Aeonion)
...synthesis) some high frequency infrared and visible light from 750nm >400nm to some low frequency ultraviolet energy can be...
grabcad
free
IR LED Light Bar - 240 Watts - 80 LEDs -1750'L X 300'W Beam - Extreme Environment
...bar from larson electronics produces light in the infrared 750nm 850nm or 940nm end of the light spectrum depending...
3dwarehouse
free
MSX/R Tigersnake GTS
...the 4.0 pt4000r v8, re-tuned to produce 735hp@7100rpm and 750nm5000rpm. that's 100hp more than the standard 5.9l supercharged tigersnake....
25Hz
grabcad
free
T2 Pro Thermal Camera
...pro thermal camera by xinfrared. resolution: 256x192 frame rate: 25hz ...
3dwarehouse
free
Sundown Audio SA-6.5 Subwoofer Dual Inverted Transmission Line - 25Hz
...sundown audio sa-6.5 subwoofer dual inverted transmission line - 25hz
3dwarehouse
3dwarehouse
free
JBL GTO1504D Bandpass Sub Box Tuned from 25hz to 55hz Flat
...ave at radiostat@live.com. thanks sebby #band_pass #bandpass #box #driver #enclosure #speaker #sub #sub_woofer #subwoofer #woofer
3dwarehouse
free
6X Infinity 860W 8'
...infinity 860w midbass drivers. ported enclosure tuned to 25hz #25hz #bass #infinity_860w #infinity_subwoofer #subwoofer...
3dwarehouse
free
EAW BH882 + Levan Extension
...levan extension 3dwarehouse dual 18' horn loaded subwoofer with 25hz mouth...
3dwarehouse
free
re xxx 15' 28hz ported box @ 5*ft
...ported box @ 5*ft 3dwarehouse 5*ft ported box at 25hz 130.5^in of port .21*ft speaker accounted...
3dwarehouse
free
5 Cu. Ft. 15' subwoofer box
...box is five cu ft and is tuned to ~25hz #15 #15_subwoofer_box #audio #bass #bass_head #car_audio #subwoofer...
3dwarehouse
free
PMC IB1
...740mm 29.1' w 330mm 13.0' d 465mm 18.3 frequency response:25hz25khz impedance:4 ohm...
3dwarehouse
free
21' Bass Horn
...21' bass horn 3dwarehouse use b&c 21sw152 high pass: 25hz - 30hz, 24db butterworth low pass: 60hz - 100hz....
42Vdc
grabcad
free
TB6600
...grabcad tb6600 stepper driver unit buy from www.aliexpress.com, dc: 9-42vdc imax=3,5a ipeak=4,0a. model is accurate in outside dimensions in...
grabcad
free
400 Watt Ultraviolet LED Emitter - 365NM - 80 UV LEDs - NDT - 9-42VDC - Extreme Environment
... µw/cm²) in a spot configuration measured at 12".
118 mw/cm² (118,000 µw/cm²) in a flood configuration measured at 12".
grabcad
free
TB6600 Stepper motor driver by taitran
...motor driver has a wide range of power input, 9~42vdc power supply. and it is able to output 4a...
grabcad
free
TB6600 stepper motor driver by prodes
...motor driver has a wide range of power input, 9~42vdc power supply. and it is able to output 4a...
grabcad
free
TB6600 Stepper motor driver by Tdesign
...motor driver has a wide range of power input, 9~42vdc power supply. and it is able to output 4a...
grabcad
free
TB6600 Stepper motor driver by Taitran Technic
...motor driver has a wide range of power input, 9~42vdc power supply. and it is able to output 4a...
grabcad
free
TB6600 stepper motor driver by proma
...motor driver has a wide range of power input, 9~42vdc power supply. and it is able to output 4a...
grabcad
free
IR LED Light Bar - 240 Watts - 80 LEDs -1750'L X 300'W Beam - Extreme Environment
...bars can operate on current ranging from 9 to 42vdc without any modifications necessary as a result. this multi-voltage...
grabcad
free
Ultraviolet LED Light Emitter - 160 3-Watt LEDs - 9-42V - 2350'L X 450'W Beam - 400NM
...bars can operate on current ranging from 9 to 42vdc without any modifications necessary as a result. this multi-voltage...
850Nm
thingiverse
free
Lens mount for Raspberry camera by antiElectron
...lens in my set-up are the following: 720nm 760nm 850nm 950nm find below the link for purchasing the...
thingiverse
free
Night Vision Scope Attachment by Brock123
...i am still working out my illumination. i purchased 850nm light with 67mm objective lens. the light is super...
thingiverse
free
Pi Zero camera enclosure by gonzothegreat
...with all of these cameras are pretty dismal. example: https://www.aliexpress.com/item/free-shipping-48pcs-850nm12mil-led-ir-lamp-cctv-lighting-infrared-illuminator-for-cctv-camera/32700372449.html the top clicks onto the bottom piece without screws...
thingiverse
free
GoPro Session 10W IR LED Mount by Aaron5
...parts needed: 2x 30mm m3 screws some wire 10w 850nm infrared ir led: https://www.ebay.co.uk/itm/232399188379 10w 900ma constant current led...
thingiverse
free
Neat Raspberry Pi Zero night vision camera - all ports covered by CptPicard
...infra red camera "frank-s01-v1.0" raspberry pi zero w 3 850nm leds resistor - find out the voltage drop for...
thingiverse
free
Time-Lapse Photography Skeinforge Plugin by nrp
...been thoroughly reverse engineered. the hardware is simply an 850nm infrared led in series with a 180 ohm resistor...
thingiverse
free
Night Vision Helmet by GiantG
...cheap vr headset : https://www.amazon.fr/tepoinn-lunette-virtuelle-compatible-smartphones/dp/b079l4fpb6/ref=sr_1_20_sspa?ie=utf8&qid=1535474964&sr=8-20-spons&keywords=casque+vr&psc=1 the ir led : https://www.banggood.com/fr/high-power-10w-infrared-ir-840-850nmsmd-led-chip-light-lamp-diy-4_5-5v-p-1117479.html?rmmds=search&cur_warehouse=cn the heatsink (i had to recut it) : https://www.banggood.com/fr/5pcs-40x40x20mm-aluminum-heat-sink-heat-sink-for-cpu-led-power-cooling-p-1342543.html?rmmds=search&cur_warehouse=cn...
grabcad
free
SCRJ-Transceiver-850nm AVAGO-compatibel-RPO-905TR850SR001
...50nm avago-compatibel-rpo-905tr850sr001
grabcad
transceiver 850nm-125 mbit/s for scrj polymer cladded fiber (pcf) applications.
grabcad
free
Transceiver 9x1-FST-850nm 125MBit-RPO-905 TR 850 ST 001
...transceiver 9x1-fst-850nm 125mbit-rpo-905 tr 850 st 001
grabcad
fiber optical transceiver 850nm 125mbit/s f-st port.
940Nm
thingiverse
free
Infrared Illuminator 66pcs F5 black IR LED 940nm board - Holder by DarekNorway
....
screws:4pcs m2x5 self-tapping screw
abs, 240c/100c, nozzle 0.4, layer 0,15mm, 5 solid top and bottom, 3 shells, 20%, no support
thingiverse
free
DIY IRtrack by Concealed45
...in simulator programs, i used opentrack free software and 940nm 5mm leds with a modified logitech c250...
thingiverse
free
FreeTrack / TrackIR Infrared LED Clip by MelihKa
...thingiverse cr2032 operated infrared headtracker clip. required parts 3x 940nm 5mm infrared led 1x 100 ohm resistor 1x on/off...
thingiverse
free
Sensorbar + Bluetooth for Dolphin emulator
...on pcb 3.3v regulator resistors 150r x2 ir led 940nm x2 button wire as option you can mount this...
thingiverse
free
OpenMQTTGateway
...of 1technophile's repo. the following things are needed: ir-emitter 5mm:https://www.banggood.com/50pcs-5mm-940nmir-infrared-diode-launch-emitter-receive-receiver-led-p-1205409.html?rmmds=myorder&cur_warehouse=cn wemos d1 mini:https://www.banggood.com/geekcreit-d1-mini-v2_2_0-wifi-internet-development-board-based-esp8266-4mb-flash-esp-12s-chip-p-1143874.html?rmmds=myorder&cur_warehouse=cn ir-receiver:https://www.banggood.com/10pcs-universal-ir-infrared-receiver-head-with-iron-shell-tl1838-vs1838b-1838-38khz-p-1211280.html?rmmds=myorder&cur_warehouse=cn dc-socket:https://www.banggood.com/10pcs-dc-022-5_5-2_1mm-round-hole-screw-nut-dc-power-socket-rohs-internal-diameter-5_5mm-p-1200831.html?rmmds=myorder 433mhz transmitter and receiver:https://www.banggood.com/433mhz-100m-wireless-transceiver-module-kit-transmitter-receiver-2pcs-copper-spring-antenna-p-1179985.html?rmmds=myorder&cur_warehouse=cn...
thingiverse
free
GCC Rover M16 by clicky
...(to be sacrificed!) mpu9250 (https://www.ebay.co.uk/itm/profession-mpu-9250-gy-9250-9-axes-sensor-module-attitude-sensor-module-fd/282722994748?hash=item41d39a8a3c:g:knuaaoswx2dyjdzo ) hc-sr04 (http://www.ebay.co.uk/itm/hc-sr04-ultrasonic-sensor-module-detector-ranging-module-sr04-arduino-pi-pic-/131478278796?hash=item1e9cb7528c:g:yb8aamxqydttmcla) vl53l0x (https://www.ebay.co.uk/itm/ic-cj-vl53l0x-time-of-flight-tof-ranging-sensor-940nmlaser-distance-module-uk-/122894005698?hash=item1c9d0db5c2) software: https://github.com/gamescreatorsclub/gcc-rover blog:...
thingiverse
free
3D Scanner by Lindh3D
...an arduino unohttps://www.ebay.com/itm/uno-r3-development-board-microcontroller-mega328p-atmega16u2-compat-for-arduino/292039556849?epid=503214088&hash=item43fee9fef1:g:ac8aaoswhlzys4iw arduino lcd shield with keypadhttps://www.ebay.com/itm/1602-lcd-with-keypad-shield-board-blue-backlight-for-arduino-duemilanove-robot/201556596016?epid=23022375794&hash=item2eedb59530:g:ac0aaoswfl9xa42k ir diodhttps://www.ebay.com/itm/10pcs-5mm-940nmir-infrared-launch-emission-tube-diode-led-lamp-emitting/191736129142?hash=item2ca45d2676:g:vzkaaoswgz1xushk a gt2 timing belthttps://www.ebay.com/itm/2pcs-gt2-timing-pulley-20t-5-8mm-79-2m-belt-6mm-width-kit-for-3d-printer-reprap/131817122932?hash=item1eb0e9ac74:m:mosn-d5j-22nfqixxfzwkma 2 pcs 2287...
thingiverse
free
Alexa TV Lamp esp8266 infrared Arduino by atc1441
...push buttons: https://rover.ebay.com/rover/1/707-53477-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337805630&mpre=https%3a%2f%2fwww.ebay.de%2fitm%2fneuwasserdicht-momentary-on-off-push-button-runde-schalter-zufallige-farbe-12mm%2f302534817420%3fhash%3ditem46707af68c%3ag%3acbcaaoswslbyx0u2 wemos d1 mini: https://rover.ebay.com/rover/1/707-53477-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337805630&mpre=https%3a%2f%2fwww.ebay.de%2fitm%2fd1-mini-nodemcu-lua-esp8266-esp-12-wemos-d1-mini-wifi-4m-bytes-module%2f381524981999%3fhash%3ditem58d4a938ef%3ag%3aqp0aaoswfqjwn1os infrared led: https://rover.ebay.com/rover/1/707-53477-19255-0/1?ff3=4&toolid=11800&pub=5575152713&campid=5337805879&mpre=http%3a%2f%2fwww.ebay.de%2fitm%2f50pcs-5mm-940nmir-infrared-launch-emission-tube-diode-led-lamp-new%2f192210023230%3fhash%3ditem2cc09c333e%3ag%3ahicaaoswfqjwl0dm infrared receiver: https://rover.ebay.com/rover/1/707-53477-19255-0/1?ff3=4&toolid=11800&pub=5575152713&campid=5337805879&mpre=http%3a%2f%2fwww.ebay.de%2fitm%2f5pcs-ir-receiver-infrared-radiation-module-38-khz-remote-tsop4838-dip-3%2f192210024336%3fhash%3ditem2cc09c3790%3ag%3arywaaoswlnlwodyj usb led lamps: https://rover.ebay.com/rover/1/707-53477-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337805630&mpre=https%3a%2f%2fwww.ebay.de%2fitm%2flampe-fuhrte-keychain-led-nachtlicht-beweglicher-usb-energien-grosverkauf-sam%2f172986751906%3fhash%3ditem2846d05ba2%3am%3amwxd9ttsevxplimkgvlmila uln2003 transistor...
thingiverse
free
Wired Virtual Wall Barrier for iRobot Roomba Automatic Cleaner by Renaissance3DStudio
...x bjt npn transistor - 2n3904 1 x 5mm 940nm led 1 x circular rocker switch 1 x 1000ω,...
thingiverse
free
Raspberry Pi Night Vision Camera For Motioneye(os) by stefi01
...camera to detect motion so swaped it for a 940nm ir led ring and added a input jack on...
Ip68
3dfindit
free
VYR IP68
...vyr ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VOV IP68
...vov ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VWV IP68
...vwv ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VIRB IP68
...virb ip68
3dfind.it
catalog: abb installation products
3dfindit
free
GOV IP68
...gov ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VSGR IP68
...vsgr ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VWV IP68
...vwv ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VNV IP68
...vnv ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VNV IP68
...vnv ip68
3dfind.it
catalog: abb installation products
3dfindit
free
VAV IP68
...vav ip68
3dfind.it
catalog: abb installation products
Emitter
turbosquid
free
Beam Emitter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Laser Fence Emitter
...royalty free 3d model laser fence emitter for download as fbx on turbosquid: 3d models for games, architecture, videos. (1681085)
turbosquid
$25
BLAME! Gravitational beam emitter
...el blame! gravitational beam emitter for download as and dae on turbosquid: 3d models for games, architecture, videos. (1536111)
3d_ocean
$20
Swarm O Bees
...swarm o bees 3docean bee emitter – create a swarm of bees! easy to use...
3d_export
$19
Gas ceramic heater 216 XLA 3D Model
...heaters brooder 216 xla ceramic burner gas infrared radiator emitter sbm v-ray gas ceramic heater 216 xla 3d model...
3d_export
$80
Wild Raccoon
...rig controls the main body and the body hair emitter objects. includes morpher modifier with basic actions: blink, breath,...
3d_export
$5
sci-fi lab table - low poly - pbr - game ready
...eevee render engine.<br>this 3d model has metallic texture and emitter texture.<br>all blender file, textures are also attached with this.<br>environment...
thingiverse
free
oxygen emitter
...oxygen emitter
thingiverse
oxygen emitter for hydroponic deep water culture or aquarium
thingiverse
free
Holo Emitter by LukeSkypilot
...holo emitter by lukeskypilot
thingiverse
star wars - holo emitter
thingiverse
free
Mobile Emitter by MorganCoLLC
...mobile emitter by morgancollc
thingiverse
i was bored so i made the mobile emitter from voyager.
Strobe
turbosquid
$30
Strobe light
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
STROBE LIGHT
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Party Strobe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$50
Strobe light3d model
...tand adapter holder
.3ds .c4d .dxf .obj - strobe light 3d model, royalty free license available, instant download after purchase.
3d_export
$50
Strobe light 3D Model
...la lamp photo photography set studio fashion bulb fluorescent lightstand adapter holder
strobe light 3d model braz 23255 3dexport
turbosquid
$30
Strobe Light.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
Strobe Light 3D Model
... hazard beacon rotating magnet
strobe light 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 106824 3dexport
3d_export
$19
Science Fiction Strobe work platform capsule cabin deck
...strobe work platform capsule cabin deck
3dexport
1.science fiction strobe work platform capsule cabin deck 2.files include 3dmax
3d_export
$19
science fiction strobe work platform capsule cabin deck
...trobe work platform capsule cabin deck
3dexport
science fiction strobe work platform capsule cabin deck zip contain fbx obj max
3d_export
$19
Sci-fi strobe capsule cabin deck Mechanical Arm
...nical arm
3dexport
1.sci-fi strobe capsule cabin deck console elevator shaft future mechanical arm 2.files include 3dmax fbx obj
Strobing
turbosquid
$30
Strobe light
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
STROBE LIGHT
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Party Strobe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$50
Strobe light3d model
...tand adapter holder
.3ds .c4d .dxf .obj - strobe light 3d model, royalty free license available, instant download after purchase.
3d_export
$50
Strobe light 3D Model
...la lamp photo photography set studio fashion bulb fluorescent lightstand adapter holder
strobe light 3d model braz 23255 3dexport
turbosquid
$30
Strobe Light.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
Strobe Light 3D Model
... hazard beacon rotating magnet
strobe light 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 106824 3dexport
3d_export
$19
Science Fiction Strobe work platform capsule cabin deck
...strobe work platform capsule cabin deck
3dexport
1.science fiction strobe work platform capsule cabin deck 2.files include 3dmax
3d_export
$19
science fiction strobe work platform capsule cabin deck
...trobe work platform capsule cabin deck
3dexport
science fiction strobe work platform capsule cabin deck zip contain fbx obj max
3d_export
$19
Sci-fi strobe capsule cabin deck Mechanical Arm
...nical arm
3dexport
1.sci-fi strobe capsule cabin deck console elevator shaft future mechanical arm 2.files include 3dmax fbx obj
Infrared
turbosquid
$2
INFRARED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$26
Infrared Thermometer
...alty free 3d model infrared thermometer for download as blend on turbosquid: 3d models for games, architecture, videos. (1638742)
turbosquid
free
infrared heater
...ee 3d model infrared heater for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1712209)
turbosquid
$65
Infrared Thermometer
...odel infrared thermometer for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1613763)
turbosquid
$20
Infrared Thermometer
...infrared thermometer for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1681061)
3d_export
$5
Infrared Heater 3D Model
...infrared heater 3d model
3dexport
heater infrared ufo
infrared heater 3d model pavel234 19550 3dexport
turbosquid
$29
Infrared Medical Thermometer
...nfrared medical thermometer for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1553207)
turbosquid
$9
Infrared Thermometer PBR
...l infrared thermometer for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1577645)
turbosquid
$45
infrared quartz heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$33
Infrared Thermometer Red
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Ir
turbosquid
$65
FLIR Vue Pro IR Camera
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Subwoofer F&D IHOO 5.1 IR
...oofer f&d ihoo 5.1 ir for download as sldpr, max, and ige on turbosquid: 3d models for games, architecture, videos. (1523229)
3ddd
$1
Grohe Eurosmart CE IR electronic
...t ce ir electronic
3ddd
grohe , смеситель
смеситель для раковины с инфракрасным сенсором
turbosquid
$40
AK 47 Dual Laser Sight with IR Illuminator
...k 47 dual laser sight with ir illuminator for download as obj on turbosquid: 3d models for games, architecture, videos. (1586129)
turbosquid
$30
IR Bracelet Light Therapy Pain Recovery System
...acelet light therapy pain recovery system for download as ige on turbosquid: 3d models for games, architecture, videos. (1493109)
3ddd
$1
GRAMERCY HOME - Bastian Chandelier CH058-5-IR
...5-ir
3ddd
gramercy home
gramercy home
bastian chandelier
ch058-5-ir
ширина 47 см
глубина 47 см
высота 25 см
www.gramercy-home.ru
turbosquid
$20
IR-RF PLC USB TRANSMITTER 2014 RAW
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Speakers Centr F-D - Sven IHOO 5-1 IR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Speakers Front F-D F and D - Sven IHOO 5-1 IR
...) - sven ihoo 5-1 ir for download as max, ige, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1144599)
3d_export
$15
be meyers mawl-c1 ir-laser
...station for more<br>tri count: 8,335 vertex count: 4,405 texture: pbr-4k<br>https://www.artstation.com/artwork/yaed4v
Watt
3ddd
$1
Watt & Veke
...watt & veke
3ddd
watt & veke
настольная лампа messina фабрики watt & veke.
3ddd
$1
Watt & veke / Soomkai
...
watt & veke , ротанг
стильная люстра из ротанга soomkai фабрики watt&veke.;
3ddd
free
ROLLE Watt&Veke
...rolle , watt&veke
подвесной светильник rolle watt&veke; из осенней коллекции
turbosquid
$35
We Watt Kiosk
...yalty free 3d model we watt kiosk for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1461926)
3ddd
$1
Luceplan / OTTO Watt
...условия для любых задач, отдыха или работы. пожалуй, идеальный спутник вашего стола.
дополнительные форматы: max(2010), fbx, 3ds.
3d_export
free
1300 watt subwoofer for cars
...1300 watt subwoofer for cars
3dexport
the model is made to take up space in the house or in the car. power 1300 watts.
3ddd
free
Watt&Veke Spring
...авесной светильник от watt & veke spring, подойдет как для детских, так и для строгих интерьеров, особенно в стилистике лофт.
3d_export
$5
30 watts of power 3D Model
...port
30 watts power 3d model factory electric electrical energy high poly
30 watts of power 3d model karenmodeling 84649 3dexport
3ddd
$1
Watt&Veke Table Lamp
...ble lamp
3ddd
watt&veke
производитель watt&veke;
абажур - vivianne19 h16 ∅19 ∅14
опора для абажура - henning h30 ∅12
3d_export
$5
Substation 110 watts power 3D Model
...odel factory electric electrical energy high poly substation 110
substation 110 watts power 3d model karenmodeling 84650 3dexport
240
design_connected
$13
Greeny 240
...greeny 240
designconnected
bonaldo greeny 240 computer generated 3d model. designed by carollo, gino.
design_connected
$27
Chat 240
...chat 240
designconnected
de padova chat 240 computer generated 3d model. designed by colombo, carlo.
3d_export
free
Volvo 240
...volvo 240
3dexport
3ddd
$1
Formina MARQUISE 240
...
formina , ванна , джакузи
formina marquise 240
3ddd
$1
Gaggenau BO-240
...gaggenau bo-240
3ddd
gaggenau , духовой шкаф
gaggenau bo-240 - oven
3ddd
$1
PP 240 chair
...pp , 240 , pp mobler
стул pp240 фирмы pp mobler
design_connected
$29
Rod Sofa 240
...rod sofa 240
designconnected
living divani rod sofa 240 computer generated 3d model. designed by lissoni, piero.
design_connected
$29
Cave Sofa 240
...ignconnected
photo-realistic 3d models of the cave sofa 240 from bonaldo for 3d architectural and interior design presentations.
design_connected
$20
Hoop sofa 240
...hoop sofa 240
designconnected
living divani hoop sofa 240 seating objects computer generated 3d model. designed by arik levy.
design_connected
$29
Lars 240 Low
...onnected
photo-realistic 3d models of the lars 240 low sofa from bonaldo for 3d architectural and interior design presentations.
Led
3d_export
$5
led
...led
3dexport
the led is cut with all the parts.
3ddd
$1
Monacor / PARL56DMX / LED-320RGBW / LED-345RGBW / LED-300RGB
... прожектор
http://www.monacor.dk/
parl56dmx
led-320rgbw
led-345rgbw
led-300rgb
turbosquid
$10
LED
...led
turbosquid
free 3d model led for download as blend on turbosquid: 3d models for games, architecture, videos. (1691856)
3d_export
$5
led lamp
...led lamp
3dexport
led lamp, brightness animation
3ddd
free
leds-c4
...leds-c4
3ddd
leds-c4
современный торшер
3ddd
free
leds-c4
...leds-c4
3ddd
leds-c4
настольный лампа
turbosquid
$19
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Led
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
9
3ddd
$1
9
...9
3ddd
консоль
9
turbosquid
$40
Apple iPhone 9 & 9+
...del apple iphone 9 & 9+ for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1284550)
turbosquid
$12
Calligraphic Digit 9 Number 9
...hic digit 9 number 9 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389349)
3ddd
$1
PLANTS 9
...plants 9
3ddd
папоротник , кашпо
plant 9.. hope u all like it
design_connected
$11
194 9
...194 9
designconnected
194 9 computer generated 3d model. designed by lissoni, piero.
design_connected
free
Tangram 9
...tangram 9
designconnected
free 3d model of tangram 9 by lago designed by lago, daniele.
design_connected
$11
Domino 9
...domino 9
designconnected
zanotta domino 9 computer generated 3d model. designed by progetti, emaf.
design_connected
$20
Docks 9
...docks 9
designconnected
gandia blasco docks 9 computer generated 3d model. designed by romero vallejo.
3d_export
$80
mq-9
...mq-9
3dexport
3d_export
$6
washbasin-9
...washbasin-9
3dexport
Light
archibase_planet
free
Light
...light
archibase planet
lamp lighting light
light - s2 - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
light luminaire lighting
light l0465 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
lighting
...lighting
3dexport
lighting
3d_export
$5
lighting
...lighting
3dexport
lighting in livingroom
turbosquid
$3
Lighting Tree with Lights
...d model lighting tree with lights for download as max and 3ds on turbosquid: 3d models for games, architecture, videos. (1585507)
archibase_planet
free
Light
...light
archibase planet
luster lighting solution
light - s - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
luster lamp lighting
light 1 - 3d model for interior 3d visualization.
archibase_planet
free
Lights
...lights
archibase planet
surgical lights surgical lamp
surgical lights (floor) - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
lighting luminaire candlelight
light l0463 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$18
street light-lighting-light-xia bing
...
3dexport
street light-lighting-light-xia bing<br>max 2015 v-ray 3 max 2015<br>textures<br>all files in zip...