20x20 standoff

...axii mount 22mm standoff by jeremybgilbert thingiverse remix of the axii standoff mount for 22mm standoff width

...printbed standoff feet by shawdreamer thingiverse standoffs

...xt60 standoff mount by el_burrito thingiverse a smal xt60-standoff-mount to fit on a 5mm standoff print with flex filament

...standoff holder by jfaller thingiverse holder for for m3x6 standoff.

...tootti 16x16 standoffs by crashcg thingiverse sum standoffs

... thingiverse qav-s micro fpv camera standoff mount not intended for use with the stock standoffs. designed for 5mm od standoffs.

...odore 64. cut off old standoffs, sand smooth then attach these standoffs with epoxy. be sure to align with the holes in the case.

...standoff camera mount by masternoop25 thingiverse standoff mount for drone

...bts7960 standoff by albatito thingiverse standoff for bts7960. m3 hardware

...f flip stick mount thingiverse a flip stick mount for 6mm standoffs instead of the stock ones which are meant for 5mm standoffs.

...20x20 damper / 20x20 aluminiumprofil dämpfer by jmdesigns thingiverse 20x20 damper / 20x20 aluminiumprofil dämpfer

...20x20 base thingiverse 20x20 base

...20x20 clip thingiverse 20x20 clip to hold cables inside the groove, it make "click" when installed

...20x20 angle by alessioprete thingiverse use to fix angle 20x20

...20x20 esc board thingiverse 20x20 4in1 esc model show

...staple for 20x20 profile by juanjorodriguez thingiverse staple for 20x20 profile,sujección para perfil de 20x20.

...20x20 slider by indigo4 thingiverse simple slider for use with 20x20 aluminium extrusions.https://youtu.be/e5i6k_aslzi

...the #nanolongrange - 20x20 remix by 1filth1 thingiverse 20x20 fc, 20x20 vtx & 20mm camera (runcam micro swift)

...20x20 angle frame by alessioprete thingiverse external 20x20 angle

...nema support 20x20 by alessioprete thingiverse nema support for 20x20

...standoff by charlespax thingiverse this is a standoff created to hold up a friend's monitor.

...standoff holder by jfaller thingiverse holder for for m3x6 standoff.

...odore 64. cut off old standoffs, sand smooth then attach these standoffs with epoxy. be sure to align with the holes in the case.

...bts7960 standoff by albatito thingiverse standoff for bts7960. m3 hardware

...of the quad copter, but without the standoffs and with 3mm holes below where the standoffs were. requested by fb user ian paine.

...doff by maxharrison thingiverse this is a motherboard standoff that is designed to be positioned into place and then glued down.

...standoff capacitor holder thingiverse 25v/35v standoff capacitor holder. fits a 13mm capacitor.

...printbed standoff feet by shawdreamer thingiverse standoffs

...standoff by intijk thingiverse 12 + 4 mm height