20w to 100w High power led spot by jacquesl70

Last crawled date: 3 years, 1 month ago

This spotlight was created out of a need to use LED's rather than halogen lamps. I use this while filming video, etc.
I printed this in PLA+ and so far have no complaints. If you plan on using a 100W LED then perhaps print the heatsink, LED panel & Led lock using ABS or PETG.
The LED and LED drivers is from ebay, search for the following:
"DC DC boost converter Constant Current Mobile Power supply 250W 10A LED Driver"
&
"10-100W Cool/Warm White Lamp Chips High Power 30Mil SMD LED Bulb For Flood Light"
The power connector is a XT60 and the power switch is a Rocker 6A 230VAC SPST Locking with a body size of 17 x 12 x 13mm.
The fan and heatsink is a DeepCool CK-AM209 that I got from a computer shop.
Items needed for assembly:
4 of M3.5 x 16 self tappers for the joining the case top and bottom.
4 of M3 x 12 for the spacers and the LED Lock.
4 of M6 x 16 Bolts for the mounting at the bottom of the case.
4 of M6 nuts for the inside of the case, INSTALL THEM FIRST.
Mounting & stand for this light can be found here: http://www.thingiverse.com/thing:2069202