Thingiverse
2020/3030 LED Strip Rail with Diffusor - Customizable
by Thingiverse
Last crawled date: 5 years, 4 months ago
LED strip rail with diffusor. rail.json contains rail.scad presets for OpenSCAD builtin customizer. Included STLs: *-solid.stl parts are for vase mode printing, *-hollow.stl parts are with 0.8mm wall thickness. You can change most of the parameters in Customizer if needed.
I used SMD 5730 (AKA 5630) warm white LED strip, 10 mm wide, 60 LEDs/meter. The ABS-printed rail nicely stands the heat that LEDs generate. PETG (of which I printed the diffusor) softens a bit several minutes after switching the lights on, but still works well enough. If You worry about PETG softening, You may use transparent ABS, use less powerful LED strip or don't use the diffusor at all (You can disable diffusor in customizer, setting enable_diffusor to no).
I used SMD 5730 (AKA 5630) warm white LED strip, 10 mm wide, 60 LEDs/meter. The ABS-printed rail nicely stands the heat that LEDs generate. PETG (of which I printed the diffusor) softens a bit several minutes after switching the lights on, but still works well enough. If You worry about PETG softening, You may use transparent ABS, use less powerful LED strip or don't use the diffusor at all (You can disable diffusor in customizer, setting enable_diffusor to no).