2" frame for Runcam Split Mini by mambamax

Last crawled date: 3 years ago

Keep in mind that this is a major work in progress but, many have asked for my .stls so here they are! This frame support 20mm stacks using 11xx motors, and uses a <16mm wide battery strap, designed around ~29mm wide batteries. This setup mounts the Split Mini camera off the top of the stack, and covers the split mini circuit boards. You can secure the camera holder to the top of the stack using M2X4 screws, or M2x10 screws if you're using a VTX03 and want to use the stack topper I made for it! The bottom screws that thread into the stack are M2x12. The electronics stack I'm using is an Eachine Minicube stack with a lemonRX sandwiched in the middle, although you should be able to use any 20x20 stack you like!
Note that you can't use Runcam's SD card securing thing with this design, yet anyway. Did I mention it's a work in progress? :)
3/21/18 edit- Uploaded a version of the vtx03 mount with sunken screw heads, and an improved version of the camera mount that pulls the camera forwards a few mm to get the props out of the view, and to allow way more tilt. Note that this version has built in 3mm spacers, to eliminate four of the 3mm tall brass standoffs that come with the split, so now you just run a longer screw straight through from the top of the vtx mount, to the middle brass standoff in the split mini.