Thingiverse
1x3x5 by kequals
by Thingiverse
Last crawled date: 4 years, 5 months ago
A 1x3x5 floppy cuboid. Each face can turn 180 degrees. This puzzle is not proportional, and 4 of the sides measure about 25mm instead of 19mm.
To make this puzzle, print each part by the number indicated on the filename:
1 Core
2 Outer Center
2 Long Edge
2 Center Edge
4 Short Edge
4 Corner
This puzzle requires 2 M3 screws that can be bought below:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers for the 5x3 faces are standard 57mm 3x3 stickers. The 1x5 and 1x3 faces measure about 19mm x 25mm, so you can cut stickers a bit smaller to fit them.
To make this puzzle, print each part by the number indicated on the filename:
1 Core
2 Outer Center
2 Long Edge
2 Center Edge
4 Short Edge
4 Corner
This puzzle requires 2 M3 screws that can be bought below:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers for the 5x3 faces are standard 57mm 3x3 stickers. The 1x5 and 1x3 faces measure about 19mm x 25mm, so you can cut stickers a bit smaller to fit them.