Thingiverse
1x2x7 by kequals
by Thingiverse
Last crawled date: 4 years, 6 months ago
A 1x2x7 twisty puzzle. Every layer can turn in increments of 180 degrees. This puzzle cannot shapeshift.
To make, print each part by the number indicated on the filename:
1 Cap
1 Center1
1 Center2
4 Short
4 Medium
4 Long
You need 1 M3 screw and spring, which can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 57mm 3x3.
To make, print each part by the number indicated on the filename:
1 Cap
1 Center1
1 Center2
4 Short
4 Medium
4 Long
You need 1 M3 screw and spring, which can be bought here:https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 57mm 3x3.