Thingiverse
1x1" Wood Frame Kit by woogerboy21
by Thingiverse
Last crawled date: 4 years, 6 months ago
I originally designed some corner posts pieces to build a frame out of 20x20 vSlot rails. After doing so I realized a lot of the pieces don't need to be expensive v-slot/t-slot rails. This brought the idea up for using 1x1" wood for the parts that are not needed to be slot railing.
Currently the building blocks for creating the various components have been added along with a few of the parts designed for creating the 4 vertical posts and supports for a cross bar to allow for more of a table / server frame type rack solution. You can combine the various parts using tinkercad.com and create something like a small server post rack OR even a 3D printer frame.
The holes are designed for #8 Teks Lath Screws that can be found at a hardware store such as home depot.
(https://www.homedepot.com/p/Teks-8-x-1-2-in-Phillips-Zinc-Plated-Steel-Truss-Head-Sharp-Point-Lath-Screws-260-Pack-21500/100150464)
** Please note , I move slow and this project probably will take longer than most people expect to complete
Currently the building blocks for creating the various components have been added along with a few of the parts designed for creating the 4 vertical posts and supports for a cross bar to allow for more of a table / server frame type rack solution. You can combine the various parts using tinkercad.com and create something like a small server post rack OR even a 3D printer frame.
The holes are designed for #8 Teks Lath Screws that can be found at a hardware store such as home depot.
(https://www.homedepot.com/p/Teks-8-x-1-2-in-Phillips-Zinc-Plated-Steel-Truss-Head-Sharp-Point-Lath-Screws-260-Pack-21500/100150464)
** Please note , I move slow and this project probably will take longer than most people expect to complete