16x 3.5 mATX hard drive cage V2 by orrorin6

Last crawled date: 2 years, 11 months ago

Allows you to cram 16x 3.5 hard drives into an ATX case. With five of the cheapest possible 120mm fans, the hottest drives in my case are 53 C and the cage is stable even in PLA. I worked hard to get this design under 500 grams, so you should be able to get two out of a fresh roll.
I've found that the best way to mount this in the case is to remove the motherboard standoffs altogether. Then you'll need some 6-32 x 5/8" screws. These will screw directly into the motherboard tray. I would definitely use some 6# washers.
I wasn't able to use the Remix feature, but this is a remix of the two Things below:
https://www.thingiverse.com/thing:2792439https://www.thingiverse.com/thing:3183250
Donations:
XCH - xch1s400h9dcjgawdq7xwg39vvz9y0dmfz4933dxrxap7acqwaxjx4jqy5du22