Thingiverse
15x15 angle connector 90 60 60 degress for square round tubes aluminium profil by thomasdr
by Thingiverse
Last crawled date: 2 years, 11 months ago
15x15 mm system for square round tubes from DIY store
Inside Dimension = 15.5 * 15.5 mm
Nut Size M5
Nut internally
Easily printable.
For the framework are 0.8 mm shell and 25% filling enough.
For aluminum hollow section profile is the weak point.
Tighten the screw only slightly.
More from Parts
Inside Dimension = 15.5 * 15.5 mm
Nut Size M5
Nut internally
Easily printable.
For the framework are 0.8 mm shell and 25% filling enough.
For aluminum hollow section profile is the weak point.
Tighten the screw only slightly.
More from Parts
Similar models
thingiverse
free
15x15 angle connector 90 90 60 degress for square round tubes aluminium profil by thomasdr
...and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
more from parts
thingiverse
free
15x15 mm junction 5x for square round tubes aluminium profile by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 mm junction 3x for square round tubes aluminium profile by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 mm junction 4x for square round tubes aluminium profile by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 mm tripod stand for square round tubes aluminium profile by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 mm endpiece for square round tubes aluminium profile by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 mm connector for square round tubes aluminium profil by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 mm junction 4x for square round tubes aluminium profile by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 mm set of hings square round tubes aluminium profil by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
thingiverse
free
15x15 round clamp vertical for square round tubes aluminium profile by thomasdr
...re 0.8 mm shell and 25% filling enough.
for aluminum hollow section profile is the weak point.
tighten the screw only slightly.
Degress
thingiverse
free
Scx24 extreme low enter of gravity chassis by Gm1972
...this chassis where i rotated the motor (barrage) 180 degress and moved it sideways so i could place the...
thingiverse
free
Kandypens Crystal Magnetic Charging Base by greendragon42
...the slot in the base and then rotated 90 degress so that it lines up with the pen. excess...
thingiverse
free
Vortex Generator left by ingwe
...i originally put in on the wing at zero degress but i found a less 5 degree offset towards...
thingiverse
free
The Morrel - A Sculpted 60% Keyboard Case (Modified Tray or Ring Gasket Mount) by BeagleChristo
...tray and two isosceles triangles (base angle = 30 degress at the top-center and bottom-center of the tray, which...
thingiverse
free
The Faria - A Sculpted 60% Modified-Tray-Mount Keyboard Case by BeagleChristo
...tray and two isosceles triangles (base angle = 30 degress at the top-center and bottom-center of the tray, which...
thingiverse
free
The Herbault - A Sculpted 60% Modified-Tray-Mount Keyboard Case by BeagleChristo
...tray and two isosceles triangles (base angle = 30 degress at the top-center and bottom-center of the tray, which...
thingiverse
free
FLSUN 2020 Bearing for filament by ielorriaga
...coil. i´m going to use 2, putting in 90 degress each other. one on the top, where the filament...
thingiverse
free
Pentax 6x7 shutter time ring by Degress
...pentax 6x7 shutter time ring by degress
thingiverse
this thing is a replacement for original pentax shutter speed ring
thingiverse
free
20 kg·cm Robotic Gripper by MechEngineerMike
...step files are included. the gripper operates using 90 degress of servo travel and the backside is flat in...
thingiverse
free
Moen Shower Knob by zBeeble
...2mm of knurls. inside diameter 29mm turns: rougly 300 degress stop to stop inside post bit: 15mm od 9.5mm...
Thomasdr
thingiverse
free
Spare wheel discounter lawn mower 180x50x10 with ball bearing by thomasdr
...02 with 9,5mm axis
http://www.kinder-technik.de/aldi-rasenmaeher-mit-3d-druck-retten/
https://www.youtube.com/watch?v=2kpj0ecmzj4
thingiverse
free
prototype camera quick coupling plate holder M4 by thomasdr
...prototype camera quick coupling plate holder m4 by thomasdr
thingiverse
for use with my 15x15mm system
m4 nut
thingiverse
free
15x15 inside profil connector right angles square tubes aluminium profil by thomasdr
...ing" version für simple print.
is not as nice as reduced by 1mm, but easier to print.
sorry version2 had a litte 0.25 gap.
thingiverse
free
Masterspool lasercut/3D printed
...lasercut/3d printed thingiverse mashup of the lasercut masterspool from thomasdr printed core with printed retaining nut (thread stolen from...
thingiverse
free
3D Printing Checklist by thomasdr
...ove: 145x130 (height / width)
holes left: 125x150
11mm font height sure printable
scale smaller if your printer can do that.
thingiverse
free
Temperature test - PLA Anet A6 A8 Version by thomasdr
...ent.
slicer cura 3.2.1
layer: 0,2mm
nozzle: 0,4mm
perimeter: 2 side, 3 top/buttom
speed: 40mm/s
heat bed: 60 centigrade
brim: 3mm
thingiverse
free
3DLaserSpool - 3D-printer Filament refill spool by thomasdr
... rolls with 2..3kg filament soon.
i will adapt the design then.
the inner drum can be easily adjusted by extrusion in the slicer.
thingiverse
free
Test pattern for dimensionally accurate openings in 3D printing especially for fusion 360 by thomasdr
...le with import to fusion 360.
directly in my fusion file.
the table also contains data on the height of the nuts and screw heads.
thingiverse
free
Prusa I3 Hephestos Repetier Firmware Bed and Full Grafic Controller by thomasdr
...in something more complicated.
please use the config and the online tool for adjustments:
https://www.repetier.com/firmware/v092/
15X15
thingiverse
free
72 well 15x15 cm Horizontal Gel Electrophoresis Interchangeable Comb Insert by PaulAirs
...lable in the gel area. additionally, wells are made to fit 8 and 12 well multi-channel pipettes for direct plate-to-gel transfer.
thingiverse
free
72 well 15x15 cm Horizontal Gel Electrophoresis Interchangeable Comb Insert by PaulAirs
...lable in the gel area. additionally, wells are made to fit 8 and 12 well multi-channel pipettes for direct plate-to-gel transfer.
thingiverse
free
bad bones pour 15x15 by wolve17
...bad bones pour 15x15 by wolve17
thingiverse
pour imprimante 15x15
thingiverse
free
Bauhilfe für Heling by Paratwa66
...einer heling auf. das sternförmige teil wird auf ein 15x15 alu vierkantrohr aufgeschoben. das teil wird in den halter...
thingiverse
free
3DP linear bearing (recirculating) and DIY linear rail 4.5mm bb (Final version) by Baltojikale
...than aluminum square tube, thus first size starts at 15x1525x2mm 4.5mm very cheap alternatives for genuine bb's with various...
thingiverse
free
Möbel Martin Furnika LED Strip 15x15 mount for shelf by acullmann
... 15x15 mount for shelf by acullmann
thingiverse
a bracket to mount led strips i had laying around to my shelf for ambient light.
thingiverse
free
Cable Duct Corner Cover by M4dShuggah
...for a standard cable duct with a dimension of 15x15 mm and comes in four different variations: 1) the...
thingiverse
free
Hotliner Cooling by Liptoor86
...by liptoor86 thingiverse cooling hole for rc hotliner. size 15x15 ...
thingiverse
free
Quick XY Calibration test by Papazooka
...by papazooka thingiverse quick xy calibration test. size is 15x15 cm, made of 1cm steps. printing this should take...
thingiverse
free
Perler Bead Pegboard (Customizable!) with various sizes included by mak0t0san
...using this link:https://a360.co/32yncxq i've included a 25x25, 20x20, and 15x15 base. if you need a different size, i can...
Aluminium
thingiverse
free
Camera Arm for Blink Home Print Monitoring by garethps
...sidewinder x1 and likely any other printers using 40mm aluminium extrusion for the y-axis. the bolts are spaced 20mm...
thingiverse
free
Dice for lamp reflector by Tecmike
...dice to punch a lamp reflector out of soft aluminium ...
thingiverse
free
C20 motor 10x10 profile motor mount + parts Quad by TurboCinqy
...enough. will update this thing later. c20 motor 10x10 aluminium ...
thingiverse
free
Ender 5 LED Stripe holder for Alu frame X-Y by retronic
...pc, length 8.6 cm. i used led stripe on aluminium support, 1.2 mm wide - 12v (ali xpress) i...
thingiverse
free
3/4'' / 19mm (18.9mm) Bench Dog Set with Levers, Cams, Stops, etc by CabbitCastle
...from metal, wood or plastic. i used a 12x250mm aluminium rod which i threaded and tapped for an m4x20...
thingiverse
free
TAFTEL - Sailboat thingy by Naughty_Lama
...a new one as his, originaly made from casted aluminium got worn out. anyway this is 99% copy of...
thingiverse
free
Bevel cutter 45 90 30 60 - V1.1 by Benj50
...material. extra parts : you will just need 1 aluminium corner bar 15mm or 12mm 4 socket head bolts...
thingiverse
free
Moulinex Masterchef base bowl aluminium by Damien47400
...o not use the dishwasher afterwards!
mounts in place of the original plastic part to fix the aluminum bowl on the moulinex robot.
thingiverse
free
electric grill skewer (elektrischer Grillspieß/ Hähnchenspieß) by Naestrahan
..."abstandshülse" (see picture for where to use) bought: 1x aluminium sheet 3mm (see drawing for dimensions) 3x aluminium or...
thingiverse
free
Beat Saber double grip by hackeklaus
...some glue, like i dit, or with a 5mm aluminium or 3d printed rod. see me playing some beat...
60
thingiverse
free
Tuyau by Vivastreet
...car buse 1mm , couche de 0.32 vitesse de 60 chaine you tube ;tape: " by lolo cnc "...
thingiverse
free
Magazine File by ctheroux
...magazine file by ctheroux thingiverse this a magazine file 60 mm wide. it is designed for letter size paper....
thingiverse
free
Sidewinder X1 plate Z by Giovanni1965
...screws and eight m4 hammer nuts to 20x20 / 40/60 ...
thingiverse
free
Li-Ion Battery Container (parametric) by Thinger13
...slot ends to relieve mechanical stress on latch. a 60 degree rounding angle may be enough, but you have...
thingiverse
free
Profil Cura Litho pour Eryone Thinker SE by Litho3D
...litho pour eryone thinker se - pla eryone white 205-60 litho wall...
thingiverse
free
Solares Imperium: heavy cruiser Terra-class by ThomasHo
...thingiverse perry rhodan series that were published in the 60#39;s (over 3.000 books of approx 70 pages comprise the...
thingiverse
free
adapter for 3M 6800 mask covid19 angle version by tooloudtoowide
...now the same amount will print in less then 60 hours. the adapter has marks showing the side -...
thingiverse
free
Bevel cutter 45 90 30 60 - V1.1 by Benj50
... in a secure place after use.
hope this tool will be useful for you. enjoy!!!
ps : @samyp, tell me your feedback if you try it ;)
thingiverse
free
Horn Boom Box for 70 euro by john3d
...smaller speaker. go for the 2-way coaxial car speaker 60 watt is all you need. super sound and great...
thingiverse
free
Boling P1 Vlogger light Modifier - honeycomb 30/60 degree by gregorb
...20
feel free to print or remix and don't forget to post it.
if you find it useful you can send tip or buy me a coffe. thanks.
90
thingiverse
free
GBS Zero Rain / Reverse Light IVA Angled Gasket by SeanWally
...the uk's iva requirement that these light sit at 90 to the road surface. (the 8˚ gaskets are shown.)...
thingiverse
free
Hotas Support / Mount by Stopin
...40 to 33mm tube clamp for 20mm squared profiles. 90 degree corder for 20mm squared profiles. 17cm x 17cm...
thingiverse
free
Planetary Phone Stand by amasraff
...=d specification offset types can go as much as 90#39; degree angle you can slide charging cable from the...
thingiverse
free
Tubes1 by bbinnard
...31 hours to complete using a print speed of 90 mm/sec and a layer height of 0.200 mm. i...
thingiverse
free
Tubes1 by bbinnard
...more than 31 hours using a print speed of 90 mm/sec and a layer height of 0.200 mm. i...
thingiverse
free
Artillery Genius / Sidewinder X1 - Linear Mod by Narolakk
...auf den alu profilen. beim slicer das teil um 90 grad drehen wie auf den bildern. wichtig: die halterung...
thingiverse
free
Storage organizer for Agricola (2008 Ystari) by yoyoda13
...(2008 ystari). print (they will be needed to rotated 90 parts to print : 5 x player storage 1...
thingiverse
free
3/4'' / 19mm (18.9mm) Bench Dog Set with Levers, Cams, Stops, etc by CabbitCastle
...or cornerstop_height.stl or doublecornerstop_height.stl 25mm diameter top straight or 90 degree corner stops, e.g. to clamp workpieces against regular...
thingiverse
free
Small Ball Mounting System (i.a. for CAMs like Pi, C270, GoPro) by wolwin_de
...and mk2https://www.thingiverse.com/thing:3114849 because i am using this pi camera module:https://www.amazon.de/azdelivery-%e2%ad%90e2%ad%90%e2%ad%90%e2%ad%90%e2%ad%90-kamera-raspberry-gratis/dp/b01m6ucem5/ref=psdc_1626220031_t1_b07cmxjlxr i had to change the front cover of the...
thingiverse
free
pan 360° by jensmsw
...einfaches 360° pan getriebe mit pololu 120:1 mini getriebemotor https://www.exp-tech.de/motoren/dc-getriebemotoren/4860/pololu-120-1-mini-getriebemotor-offset-3mm-d-shaft-outputhttps://www.exp-tech.de/motoren/dc-getriebemotoren/4859/pololu-120-1-mini-getriebemotor-90degree-3mm-d-shaft-output einfach die elektr.. teile von einem standard servo benutzen...
Profil
thingiverse
free
Quiet control box for SKR 1.4 + cable mgmt layer. by Evilkoal
...should fit any other boards that have the same profil/mounting points. recreated top to fit 95mm fan, since that's...
thingiverse
free
Hotas Support / Mount by Stopin
...parts: 40 to 33mm tube clamp for 20mm squared profils. 90 degree corder for 20mm squared profiles. 17cm x...
thingiverse
free
C20 motor 10x10 profile motor mount + parts Quad by TurboCinqy
...t;quad from ply. is also printable if your printer is big enough.
will update this thing later.
c20 motor
10x10 aluminium profile
thingiverse
free
Simple snap-in TPU height adjustable M6 hex bolt feet by mukha521
...printer or any other construction that has vertical aluminum profil extrusions to screw an m6 hex bolt into. tap...
thingiverse
free
Low profile shock absorbing feet for 2020 V-slot (double-wide, so; 4020 or 4040) profile ((remix) remix)) by coza73
...ofile ((remix) remix)) by coza73
thingiverse
remixed design to add a indent to suit 8mm (5/16") stick on surface protectors
thingiverse
free
Traxxas TRX4 thumb control by mikkosm
...it fits under the steering wheel and is low profil to also allow normal use of the wheel. remember...
thingiverse
free
Silencer 9.2 by Bendfv
...ammo was used. at least five replicate firing sound profils were used. unsuppressed the gun produced a peak of...
thingiverse
free
Towel Bar Extension for shower by agibson2
...just put these on the ends of the square profil towel bar and then turn the bar to lengthen...
thingiverse
free
roll holder by spartano83
...place a smartphone or wet wipes amazon basic print profil by default prusa slicer, i recommend turning off the...
thingiverse
free
Quefrency Rev2 High-Profile Case by StreelyDan
...eed 16 m2x16 screws for assembly.
i have included step files for you to use...please attribute me if you want to upload a remix.
Square
thingiverse
free
Minimalistic spice rack (Remix for square wooden sticks) by lernuk
... for square wooden sticks) by lernuk
thingiverse
remix of juancroldan's design for square sticks, didn't find round one.
thingiverse
free
Hotas Support / Mount by Stopin
...included parts: 40 to 33mm tube clamp for 20mm square profiles. 90 degree corder for 20mm squared profiles. 17cm...
thingiverse
free
Rotogate by MyqM
...two inlets or none. see you tube channel ten square metre workshop for details of construction.https://youtu.be/iv7r5wy3ltq uses a geared...
thingiverse
free
"Freezer Jail" Freezer Organizer / Divider (with STEP file) by registeredthing
...panels. i used the following parts: 3/4 x 36" square dowel rods (5 pack)https://www.amazon.com/gp/product/b01c6bz2ye/ go create 3/8" round wooden...
thingiverse
free
Towel Bar Extension for shower by agibson2
...you just put these on the ends of the square profile towel bar and then turn the bar to...
thingiverse
free
Valve Index HMD stand by jsn079
...print this part on its back, with the open square to the bottom. it does, however, need supports (touching...
thingiverse
free
Horn of the Changeling Queen - perfectly aligned by MRAAGH
...- perfectly aligned by mraagh thingiverse https://www.thingiverse.com/thing:59503 but with square holes on all parts and a cube that fits...
thingiverse
free
Google Pixel 3a cover magnetic (TPU) by roemsi
...= 45 degree lines, 2 = diamonds, 3 = square can be combined with design (svg file) set $pocket_for_iron_plate=false...
thingiverse
free
Funnycar Chassis #1 by SlotcarBrad
...rear mount. the body mounts are glued into their square holes after picking the right one for the job....
thingiverse
free
3/4'' / 19mm (18.9mm) Bench Dog Set with Levers, Cams, Stops, etc by CabbitCastle
...with an angled opening on the top to hold square rectangular or round stock for cutting, drilling and planing...
Round
thingiverse
free
Minimalistic spice rack (Remix for square wooden sticks) by lernuk
...remix of juancroldan's design for square sticks, didn't find round ...
thingiverse
free
Echo Show 8 Under Cabinet Swivel Mount (Remixed Hooks) by brentil
...reinforcement to the top as it was excessively flexing, roundd the edges because they were digging into the fabric,...
thingiverse
free
E-Flite A-10 64mm EDF Receiver Hatch by santanig5
...8mm x 2mm magnet, it's what i had laying around and one for the oem bar magnet (not...
thingiverse
free
"Freezer Jail" Freezer Organizer / Divider (with STEP file) by registeredthing
...36" square dowel rods (5 pack)https://www.amazon.com/gp/product/b01c6bz2ye/ go create 3/8" round wooden dowels, 10ct (qty3)https://www.walmart.com/ip/go-create-3-8-round-wooden-dowels-10-ct/298692813 large clear bumpers pads 9pcs...
thingiverse
free
Vixen GP Goto Conversion Using Meade DS Motors by wt808
...shielded, 5x8x2.5mm 2x 5mm od x 60mm l stainless round shaft 2x gt2 timing belt, 180mm circumference, 6mm width...
thingiverse
free
QiDi X-Max bed leveling gauge mount by fdunn59
...was a tad small so you can use a round file and to make it fit tight. the magnets...
thingiverse
free
Silencer 9.2 by Bendfv
...performance should be expected with sub-sonic ammo. over 100 round have been shot through this design without it blowing...
thingiverse
free
Towel Bar Extension for shower by agibson2
...of the towel bar. the spinner holder i put around the towel bar so that you can hold it...
thingiverse
free
Valve Index HMD stand by jsn079
...the hexagons. i've used some neoprene padding on the roundd top for extra grip, otherwise, you might want to...
thingiverse
free
Vertical Stand Notebook/Laptop 15" by Nitr03D
...a vertical way. the part in the back is roundd. so there is no junky wobbling when the device...
Connector
thingiverse
free
XT60 Connector Protection Kit by 77-17
... or into connectors
optional tethered configuration
delux xt60 family
bonus squid wire management
print in place without supports
thingiverse
free
XT60 4PC RECEPTACLE_XC-C-ASSEMBLY by 77-17
...carefully fitted xt60 receptacle for plain type xt60 female connector firmly clamps connectors in place delux xt60...
thingiverse
free
DC adapter for ActivEnergy 20V power tools Li-Ion battery pack by suromark
...power tools li-ion battery pack by suromark thingiverse a connector to use the activenergy xyz561/2019sud 20v power tools accumulator...
thingiverse
free
XT60 4PC PLUG_XC-A-ASSEMBLY by 77-17
...fitted xt60 plug manifold for plain type xt60 male connector firmly clamps plugs in place delux xt60...
thingiverse
free
Anycubic i3 mega direct Titan Aero by Kyneq
...is a 3-diode led strip connected to the initiator connector on the original carriage board. belt tension ,plate holder...
thingiverse
free
USB Type A Housing Case by jinner
...thingiverse usb a housing / case for a usb connector male part with small tabs to locate it. cable...
thingiverse
free
Flexible Flat Cable tongs by jinner
...designed to insert a flexible flat cable into its connector designed for the wanhao duplicator i3 plus lcd disply...
thingiverse
free
Anycubic Mega Pro - Cable Holder by daedalas1981
...cable from over flexing and pulling out of the connector during a print. modified from the original: cutout so...
thingiverse
free
Drying rack connector by ErwannG
...connector by erwanng
thingiverse
i repair my old drying rack by creating these connectors to connect two racks on the both ends.
thingiverse
free
Icom IC-705 protective cover . by bastosshawn
...thingiverse printed a protective cover for the 705. all connector are still accessible. cover and 705 are connected with...
Angle
thingiverse
free
VESA monitor mount French Cleat by Rockster160
...i used ½" osb board cut at a 45º angle and screwed it to the wall as the back...
thingiverse
free
GBS Zero Rain / Reverse Light IVA Angled Gasket by SeanWally
...pu.
the design includes a small seat adapter make sure that bolts used to secure the light are still mating at the correct angle.
thingiverse
free
Prusa i3 Nema17 Extruder Motor Heatsink Clamp by Revenson
...heatsink falling off. the sides of the clamp are angle inward, which adds some tension when installed. while this...
thingiverse
free
Surfboard Softboard FCS Fin-Boxes by b3n3d1k7
...time), uses normal fin-screws and has a 6 degree angle outwards for the fins. i also attached a picture...
thingiverse
free
Taranis X9D Immersion EZ UHF module antenna extension 45 degrees angle mod. by TurboCinqy
...angle mod. by turbocinqy
thingiverse
extends you sma for about 10mm outside the module.
so you can add a 45 degrees sma adaptor.
thingiverse
free
Feiyutech Mini 3D Camera mount 42mm height. Thieye E7 by TurboCinqy
...strap. 2 closed loops for strap will decrease gimbal angle ...
thingiverse
free
Di3play - Wanhao Duplicator i3 Plus LCD Display Enclosure by jinner
...by bosbessenbasje" remixed to incorporate the following: raised viewing angle to 50 degrees recess around microsd slot mounts into...
thingiverse
free
Spool Holder for Creator Pro by ItsDeCia
...the machine for a cleaner desk. the edge is angle to prevent the spool from falling off and the...
thingiverse
free
Vixen GP Goto Conversion Using Meade DS Motors by wt808
...12vdc power supply, center-positive, 1.5a minimum (preferably with a right-angle dc connector) 1x meade 505 rs-232 serial interface (optional,...
thingiverse
free
Retractable Bicycle Mirror Holder by BotLawson
...that determine how far behind the handle-bars mirror arm angle. the clamp is designed for 22mm handlebars. the ball...
Tubes
thingiverse
free
Dustguard & cover for Sanwa joystick by Botvinnik
...ido una versión de 5 cm por si utilizas un extensor de 1.5 cm.
los ficheros .step para todos los diseños también están incluidos.
thingiverse
free
Tuyau by Vivastreet
...t; by lolo cnc " by lolo 2 chaine
<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3>3<3
thingiverse
free
Hotas Support / Mount by Stopin
...d seems to be enought.
from my experience, no support is needed, you only need to properly set the print position for each thing.
thingiverse
free
Sidewinder X1 Bowden holder by CRYSIS-FPV
... you are running the sidewinder x1 - z brace by double_mirages it will help as i run the ptfe tube through the brace.
see photos.
thingiverse
free
Dipole 130 and 180 degrees for 3mm tube. by TurboCinqy
...egrees for 3mm tube. by turbocinqy
thingiverse
no special settings
1km test flight.. - 80db @ 100mw
https://youtu.be/pauiyfwncpe
thingiverse
free
RC remote stand connection for Taranis TBS crossfire module by TurboCinqy
.../ futaba dx6 ff9 9x remote controller rc quadcopte tubes are removable. with the full crossfire module you have...
thingiverse
free
Rotogate by MyqM
...annel ten square metre workshop for details of construction.https://youtu.be/iv7r5wy3ltq
uses a geared motor to rotate the rotor.
thingiverse
free
Tamiya Clod Buster Wheel Spacer by Beige
...the wall thickness can be increased to makes the tubes around the screws more substantial. you can also use...
thingiverse
free
Prusa Bear Mounted 5 x PTFE Holder by simpsqo
...this is a mounted ptfe guide for mmu2 5 tubes that allows securing the tubes and under the desk...
thingiverse
free
Ant Test Tube Feeder 13mm by Jug5y
...for semi claustral ant queens, designed for 13mm test tubes feel free to message me if you need it...