1.5" Tube Drill Guide 3d model
3dmdb logo
Thingiverse
1.5" Tube Drill Guide

1.5" Tube Drill Guide

by Thingiverse
Last crawled date: 4 years, 3 months ago
Quick clamp on jig for drilling tube. Use with vice grips, by hand, or hose clamps to hold in place. Drill one side for a centered and perpendicular pilot hole, or both sides for a hole clean thru the tube center. Great for roll cages or other equipment you can't put back into a drill press.
The large holes on either side of the jig are sized as the drill-hole for a 1/2-20 tap, to accept a thread-in drill guide/bushing. Simply run a tap thru the print, and screw in the bushing of your choice.

Tags