15-Berth Aero Dock Benchy Stand v1

Last crawled date: 5 years, 1 month ago

Aero Dock Boat Stand for any growing 3dbenchy collection (benchy here: https://www.thingiverse.com/thing:763622 ).
prints without supports *
I wanted a stand that could hold the benchies facing outwards, suspended in the air.
This is the result.
I divided the lower and upper decks to help minimise risk of failed print.
Instructions:
Print the deck and top and brackets. Don't use too brittle a material, as the holder uprights are quite thin.
Name your boat using the sign customiser
Ensure each bracket holder has a space between the uprights and then carefully slide each bracket downwards into the bracket holders.
Slide the nameboard into its slot.
Now slide each benchy into a bracket, they should clip into place fairly well but still be able to clip out again.
Mount the dock on a wall using the screw mounts if desired and add more benchies as you print them.
I suggest printing at 0.2mm layer height and at least 20% infill.