Thingiverse
147mm Mini Quad Frame by jolars
by Thingiverse
Last crawled date: 3 years ago
This is a remix of the awesome 135 micro that Janmittner subitted, here - http://www.thingiverse.com/thing:1091279
I had some parts laying around that I have been wanting to put together in a 3" frame and this design looked promising.
To fit my CC3D flight controller (and any 35mm wide FC), I widened the frame and adjusted the hole placement. I also wanted to use the nylon spacers I had laying around so I widened the holes enough to fit them through.
I wanted to mount an antenna to the top plate so I added a 1/4 through hole.
The best part for me is that this frame actually fits on my 150mm Printrbot bed :)
EDIT 1/18/2016 - I added a FPV pod for the front of the frame to hold a camera at a ~12 degree angle. It integrates into the frame nicely without any additional hardware.
EDIT 1/22/2016 - I added a v2 of the main frame and also the top plate. This will make the top plate a little thicker and adds some more plastic around the bolts that hold the motors in place. These changes should make it much more resilient to a crash. This version is coming in at 196 grams with my current gear.
147mm Frame
CC3D running LibrePilot
12a Rotorgeek ESCs
DYS 1306 3100kv motors
Eachine 200mw Tx
LemonRx Rx
PilotHD FPV camera (records at 720p)
I had some parts laying around that I have been wanting to put together in a 3" frame and this design looked promising.
To fit my CC3D flight controller (and any 35mm wide FC), I widened the frame and adjusted the hole placement. I also wanted to use the nylon spacers I had laying around so I widened the holes enough to fit them through.
I wanted to mount an antenna to the top plate so I added a 1/4 through hole.
The best part for me is that this frame actually fits on my 150mm Printrbot bed :)
EDIT 1/18/2016 - I added a FPV pod for the front of the frame to hold a camera at a ~12 degree angle. It integrates into the frame nicely without any additional hardware.
EDIT 1/22/2016 - I added a v2 of the main frame and also the top plate. This will make the top plate a little thicker and adds some more plastic around the bolts that hold the motors in place. These changes should make it much more resilient to a crash. This version is coming in at 196 grams with my current gear.
147mm Frame
CC3D running LibrePilot
12a Rotorgeek ESCs
DYS 1306 3100kv motors
Eachine 200mw Tx
LemonRx Rx
PilotHD FPV camera (records at 720p)
Similar models
thingiverse
free
QX90 FPV Camera Mount and Top Plate by kaotixkc
...ome spare rubber grommets like you use on the normal frame and the v1.1 is the smaller holes so the grommets aren't required.
thingiverse
free
Peon230 - 35mm Frame Support by SandroFTW
...t have any screw holes because i just use a simple 3d-printed 25 degree angle and some foam tape to mount my camera to the frame.
thingiverse
free
145 Mini FPV Quad Frame by jolars
...y camera.
edit february 7, 2016 - i added a v2 version of the frame. slightly lighter, should be just as strong as the original.
thingiverse
free
Anet A8 Electronics Case by MisterSir72
...ortion of the the case. it fits in sideways with the usp ports sticking out to the left. i included an stl showing the placement.
thingiverse
free
ZMR250 X-Frame Redesign - 225mm by jolars
...
flip32 f3 fc running betaflight
hawkeye 200mw tx
cheap-o ir 28mm camera
weighed in at 470 with this setup and a 1300mah battery.
thingiverse
free
Runcam 3 30.5mm Tower Mount by sethmo
...lt through my top plate for my fpv camera mount.
other than that, i added some fillet to some areas to make it a little smoother.
thingiverse
free
Flosstyle Gopro mount
...through the mount and hold it perfectly so you can screw the top plate with the screws touching th carbon which is for me better.
cults
free
Easy removable top plate for microquad with room for Horizon Hobby micro FPV camera
...ubber band all around the frame and battery to keep it in place.
update 10-10-2016: added repaired version (credits to loswave)
thingiverse
free
Easy removable top plate for microquad with room for Horizon Hobby micro FPV camera by bjorntm
... rubber band all around the frame and battery to keep it in place.
update 10-10-2016: added repaired version (credits to loswave)
thingiverse
free
Silicone stamp base by jkavalik
...he silicone is not glue-like and does not hold to the original base so i made holes into it to hold the stamping plates in place.
147Mm
thingiverse
free
Chain Guard 189mm/147mm by CNCKitchen
...r of 189mm and a hole distance of 147mm.
printed it in pc-abs for temperature and impact resistance.
https://youtu.be/0ho4c4hgjmy
thingiverse
free
Comb hair by Synz
...comb hair by synz thingiverse dimension 147mm x...
thingiverse
free
TANK - The Spool Holder - T147 by 3dpn
...enough. prints in one piece without support. print size: 147mm x 147mm x 147mm a larger model for most...
thingiverse
free
Modern Soap Holder by cnorth
...minimalist soap holder for your bathroom or kitchen. dimensions: 147mm x 23mm x...
thingiverse
free
LED Matrix Box by m0m0mo
...matrix red 5mm. the led matrix is 180mm x 147mm x...
thingiverse
free
Stark Sigil
...so that it fits on an i3 style printer, 147mm wide 190mm tall and 6mm thick. can easily be...
thingiverse
free
Pic a Cheveux (Hair Pin) 3 Branches - Arrondi (Rounded) by GallonSebastien
..."bois". malheureusement je n'en ai pas :) dimensions : 45mm/147mm9mm longueur des pics : 120mm * /en/ just a...
3d_sky
free
AxoLight_Fairy
...fairy designer: manuel vivian country: italy dimensions bra_ap fairy: 147mm (height) x 90mm (width) x 102mm (depth) dimensions suspended...
thingiverse
free
4 Square .25mm 220x220 Bed Leveling by swedishfishbandit
...caliper, takes around 3 minutes to print and uses 147mm of...
Jolars
thingiverse
free
Architectural Detail - Old Doorway by jolars
...ld doorway by jolars
thingiverse
this is a simple model of a doorway - it is mirrored on two sides and sits on a small pedestal.
thingiverse
free
Name Box - Avery by jolars
... a little box with the name avery on the side. lid has 3 flowers on it.
i printed this without supports with pretty good luck.
thingiverse
free
Skull Ring - Mens by jolars
...a cool vampire skull (probably cant see it at this resolution!) and added it to a mens ring. a bit of a one-size fits most deal.
thingiverse
free
Box with Name - MATT by jolars
... little box with a name on the side. i will do other names and have already published a blank box if you want just a simple box.
thingiverse
free
Motor Bumper - ZMR150 by jolars
...arms in crashes - very lightweight and easy to install.
designed for my zmr150 from banggood
printed on my printrbot simple metal
thingiverse
free
Box with Greek Relief on side by jolars
...s a first try at getting the relief from the old greek sarcophagus onto one of my models.
i will update with any modifications.
thingiverse
free
Box with sliding lid by jolars
...i liked the design enough that i made a slightly larger version :)
prints great on my printrbot with no supports in two pieces.
thingiverse
free
Solder Spool Holder by jolars
...se solder from a reel/spool. it uses a bearing from a skateboard that i had laying around.
printed on my printrbot simple metal.
thingiverse
free
Tzar's Castle by jolars
..., the details on the smaller pass through on the little towers lost some detail, but still turned out fine.
printed in gold pla
thingiverse
free
Nema 17 Mount by jolars
...dded a few mm space and a solid mounting face.
i have added a spacer - i needed this for a set of longer mounting screws i had.
Quad
design_connected
$4
Quad
...quad
designconnected
brent comber quad computer generated 3d model. designed by comber, brent.
turbosquid
free
Quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$69
Quad bike
...uad bike
3docean
bike hi-poly moto quad quad bike quadbike
high-poly model quad bike. model uses mental ray materials and render.
3d_export
$14
quad bike
...quad bike
3dexport
3d_export
$50
Quad 3D Model
...quad 3d model
3dexport
quad atv
quad 3d model floris 64690 3dexport
turbosquid
$8
Space quad
...bosquid
royalty free 3d model space quad for download as stl on turbosquid: 3d models for games, architecture, videos. (1366239)
turbosquid
free
Ornament quad
...quid
royalty free 3d model 3d ornament quad for download as on turbosquid: 3d models for games, architecture, videos. (1628075)
turbosquid
$19
Quad Drone
...
royalty free 3d model quad drone for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1202459)
turbosquid
$150
Quad bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Lego quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model
Frame
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n071113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Frame
...frame
3ddd
frame
3ddd
free
Frame
...frame
3ddd
frame
archibase_planet
free
Frame
...frame
archibase planet
frame mirror frame ornament
frame n260113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame photo n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window frame window
frame 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame wall frame decoration
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.