Thingiverse
137.5mhz QFH antenna by killowatt
by Thingiverse
Last crawled date: 3 years, 3 months ago
An easier to print qfh antenna that can be adjusted for variance in pipe sizes. this should fit 1/2 pcv pipe/conduit as well as any pipe within approx 21-24mm
Improvements include.
~ Symmetrical parts
~ Correct size for 137.5
~ Short and long arms marked
~ Thicker
~ Larger wire holes (4.5mm)
Usage
Print 2 of the x shaped parts and a short and long arm.
Trim nubs to fit pipe using side cutters or a file
Assemble parts onto rod and glue
Wire antenna per attached img
12/32020
Added segmented files for smaller printers 200x200
you will need
1 x-part
2 center sections
4 long arms
4 short arms
For 100x100
1 x-part
2 center sections
4 long arms
4 short arms
8 extenders
Improvements include.
~ Symmetrical parts
~ Correct size for 137.5
~ Short and long arms marked
~ Thicker
~ Larger wire holes (4.5mm)
Usage
Print 2 of the x shaped parts and a short and long arm.
Trim nubs to fit pipe using side cutters or a file
Assemble parts onto rod and glue
Wire antenna per attached img
12/32020
Added segmented files for smaller printers 200x200
you will need
1 x-part
2 center sections
4 long arms
4 short arms
For 100x100
1 x-part
2 center sections
4 long arms
4 short arms
8 extenders
Similar models
thingiverse
free
QFH antenna by ok1cdj
... build this antenna very easily.
dimensions calculator and more info about qfh antenna: http://jcoppens.com/ant/qfh/calc.en.php
thingiverse
free
Anet A8 X-axis Cable chain long 1/2 piece by manstink1
...le chain section for the x-axis, it was designed to fit more easily on the print bed. 2 of these will make the normal sized part.
thingiverse
free
Star Wars: Rebels - Full Size C1-10P Chopper - Main Arm by ProtoPROPS
...eople with chopper bodies from other designers. you may have to adjust the lengths of the tubes to hit the arm opening properly.
thingiverse
free
QFH Antenna by droomurray
...s and fusion 360 source files so you can modify as needed.
please note that history / layout in fusion 360 will be messy; sorry !
thingiverse
free
1 1/4 inch Pipe Connector Cap by saudffs
... at this website:
http://tinhatranch.com/how-to-build-a-qfh-quadrifilar-helix-antenna-to-download-images-from-weather-satellites/
grabcad
free
Pipe Tap Set Box
...ox holds 6 npt pipe taps 1/4, 3/8, 1/2, 3/4, 1, and 1-1/4 sizes. 8-3/4" long x 5" deep x 2-1/4" high when closed.
thingiverse
free
1/2 inch CPVC pipe inner joints and end cap by d_j_l
...11 flow guard gold pipe, model# cts 12005 0600)
90 degree elbow: long or short
3-way joint: all short or 2 long + 1 short
end cap
thingiverse
free
Wire Spool Rack Hanger Brackets
...gth 11" x 1/4" dia aluminium rod
(2) 1" pipe clamp
(1) l bracket (3d printed part)
(1) r bracket (3d printed part)
3dwarehouse
free
Shedule 40 PVC pipe fittings
...2'. for longer lengths scale 1' pipe along the z axis. #90 #pipe #plastic #plumbing #pvc #schedule_40 #slip_fittings #tee
thingiverse
free
Tie Fighter Body for Hubsan X4 H107C by cudbur
...motor wires aren't long enough to thread through the arms, so i extended them with wires cut from the x4 part replacement kit
5Mhz
thingiverse
free
partie central dipole 5MHz (et autres bandes) by F4EED_KI7QQP
...e pour dipole correspondant a la piece utilisée dans https://f4eed.wordpress.com/2021/02/17/antenne-radioamateur-raccourcie-5mhz/
thingiverse
free
Mini Tesla Coil Base by rogbigras
...generator ar 4kz, the coil jumps up to about 5mhz once it ramps up and you can visually see...
grabcad
free
Intersil 80C88Z
...intersil 80c88z grabcad 1 core, 16-bit 5mhz ...
grabcad
free
generator częstotliwości AX-DG105
...generator częstotliwości ax-dg105 grabcad generator: function; 5mhz lcd; ch: 2; 1024pts; vert.resol: 8bit manufacturer symbol:...
3dwarehouse
free
SHARP Personal Computer MZ-5500 (1983 Japan)
...sharp personal computer mz-5500 (1983 japan) 3dwarehouse 1983年に発売されたシャープの16ビットパソコンのmz-5500です。 cpuはインテル8086(5mhzを搭載し、640×400ドット16色のビットマップディスプレイ、 スムーズスクロール、ハードウェアによるマルチウィンドウ(最大4面)、マウス対応など、 当時の日本の16ビットpcとしては最先端のものでした。 #mz5500 #sharp #vintagepc #retropc...
Killowatt
thingiverse
free
1.7ghz Helix antenna by killowatt
...a by killowatt
thingiverse
1.654ghz antenna for weather sat reception. pint the base with some infill and the tube in vase mode.
thingiverse
free
QFT pvc conduit adapter by killowatt
...vc conduit adapter by killowatt
thingiverse
1/2in electrical pvc conduit adapter for https://www.thingiverse.com/thing:4260044/
thingiverse
free
NooElec Balun case with wire attach points by killowatt
...h wire attach points by killowatt
thingiverse
added attach points for the antenna wire to take the strain off of the connector.
thingiverse
free
Crosman Receiver Remixed by killowatt
...round dowel is highly recommended to get a good solid mount
the lower bolt guide is removable for those without aftermarket bolts
thingiverse
free
pvc antenna clamp on mount by killowatt
...und 1/2in pvc conduit but should fit anything around that size due to the tapered hole. use the screws and pad from thing:2767847
thingiverse
free
120deg tape measure noaa satellite antenna by killowatt
.... this antenna uses tape measure elements and should fit any pipe or stick smaller than 33.5mm (1 in pvc) by using longer screws.
Qfh
thingiverse
free
QFH antenna by ok1cdj
... build this antenna very easily.
dimensions calculator and more info about qfh antenna: http://jcoppens.com/ant/qfh/calc.en.php
thingiverse
free
QFH 137MHz Antenna by SynarK
...11 :
added a picture received today with the antenna (no amplifier, only the antenna connected to the sdr rtl2832u dongle :-) )
thingiverse
free
Antenna Mast Holder For QFH by BrocoSoup
...antenna mast holder for qfh by brocosoup
thingiverse
mast 25mm antenna 50mm
thingiverse
free
QFH Antenna for 145mhz by NA8E
...ell.
mine is mounted on fiberglass mast at around 20ft. swr is usable for transmitting over most of the 2m band.
73s
na8e
thingiverse
free
QFH Antenna by droomurray
...s and fusion 360 source files so you can modify as needed.
please note that history / layout in fusion 360 will be messy; sorry !
thingiverse
free
NOAA APT QFH Antenna by ThanUndone
...on filters and amplifiers) on instructables:
https://www.instructables.com/id/inexpensive-noaa-apt-ground-station-utilizing-the-/
thingiverse
free
QFH Antenna with ring connectors
... elements).
print the spacer out and use it to connect all the pieces for a nicer looking (and easier to put together) antenna.
thingiverse
free
QFH antenna 137.5MHz by osvold
...essing.
later on, i will add caps for the arms and top of the antenna, but no need to rework the design, as it works as intended.
thingiverse
free
QFH antenna for sat dish feed horn at 1700MHz or 1.7GHz GOES Satellite Weather Rx
...ve 1700mhz signals from the geo-synchronous goes 16 satellite for use with either a linux box, or pursuing through a windows box.
137
turbosquid
$8
Table 137
...lty free 3d model table 137 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1503814)
turbosquid
$7
Fireplace 137
...free 3d model fireplace 137 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1229253)
turbosquid
$15
Curtain 137
...e 3d model curtain 137 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1707543)
turbosquid
$9
Office 137
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
evermotion
$7
railing 137 am79
...key sculptures 137 am79 railing
highly detailed architecture railing with all textures and materials.. evermotion 3d models shop.
evermotion
$7
chair 137 AM147
...model of chair with textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
Furniture 137 AM29
... furniture with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$15
rocks 137 am126
...s with ivy with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
turbosquid
$12
FLOWER PACK 137
...ee 3d model flower pack 137 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1639465)
turbosquid
$7
Rug Set 137
...y free 3d model rug set 137 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1435860)
Antenna
archibase_planet
free
Antenna
...chibase planet
antenna aerial television antenna
antenna kathrein n090913 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna
antenna 1 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
equipment satellite antenna
antenna 2 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...ntenna
archibase planet
satellite antenna equipment dish aerial
antenna 3 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna dish dish aerial
antenna 4 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...e planet
antenna dish dish aerial
antenna c-band satellite s180-g n210612 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
car antenna
...car antenna
3dexport
car antenna, antenna, car gadgets
turbosquid
$1
antenna
...rbosquid
royalty free 3d model antenna for download as blend on turbosquid: 3d models for games, architecture, videos. (1655786)
3d_export
free
Station with antenna
...station with antenna
3dexport
station with antenna
turbosquid
$5
Antenna
...id
royalty free 3d model antenna for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1381532)