Thingiverse
1300-1500mAh LiPo Battery Protector by falconmultirotors
by Thingiverse
Last crawled date: 3 years ago
A drone LiPo battery protector for larger ~76mm long 1300-1500mAh batteries and standard 20mm wide battery straps. The strap sits in the middle of the pack if your battery is about 76mm long.
A balance lead connector hole is provided in the rear of the sled to keep your balance leads away from your props.
The 30° launch angle gives you instant forward acceleration off the line so you always get the holeshot.
A balance lead connector hole is provided in the rear of the sled to keep your balance leads away from your props.
The 30° launch angle gives you instant forward acceleration off the line so you always get the holeshot.
Similar models
thingiverse
free
Lipo Balance Lead Straps
... a nice snug fit. the 4s was designed to fit most 4s 1300-1500mah lipo batteries and the 3s was designed for 3s 525mah batteries.
thingiverse
free
Lipo Battery protection by SkyIron
...protection by skyiron
thingiverse
to protect your battery from a crash. good for 1300 and 1500mah battery. with balancer holder
thingiverse
free
850mAh LiPo Battery Protector by falconmultirotors
...ds away from your props.
the 30° launch angle gives you instant forward acceleration off the line so you always get the holeshot.
thingiverse
free
FPV Mini Quad 4S 1300 Lipo Battery Protector Glove by The_Wizard
...ni quad racing battery.
has "pocket" for inserting your balance connector to secure it out of the way.
print in tpu....
thingiverse
free
LiPo battery protector for Infinity 4S 1500mAh by tomfrajer
...its also infity 1300mah, gaoneng 1500mah 120c - all tested.
this is very good printed using colorfabb xt-cf20 or just plain tpu.
thingiverse
free
Battery protector 1300mah by ruan69er
...battery protector 1300mah by ruan69er
thingiverse
lipo battery slip for 1300 size lipos.
thingiverse
free
Lipo battery protector plates by gizmatron
... strap is 22mm slot which will take most straps, all mine are 20mm.. the dual strap is 18mm slot .. my dual straps are 16mm wide.
thingiverse
free
6s Balance lead protector for bonka Batteries by modeminho
... for bonka batteries by modeminho
thingiverse
this is a balance lead holder for 6s bonka lipos. print in tpu for best results .
thingiverse
free
Lipo Balance Strap (4S) by zackattackfpv
... a lipo balance lead strap. it keeps your balance lead from ending up in your props during a crash. should fit most 4 cell packs.
thingiverse
free
OB1 - LIPO PROTECTION by SkyHero3D
...for 4s/3s lipos, up to 20mm strap.
flexible filament is ideal for a long time use.
tested and approved on my sky-hero, ob1 frame.
Falconmultirotors
thingiverse
free
Splitshark Booties by falconmultirotors
...splitshark booties by falconmultirotors
thingiverse
softmount booties for your splitshark! print 2 of each file.
thingiverse
free
Cinebarge Arm Bootie by falconmultirotors
...cinebarge arm bootie by falconmultirotors
thingiverse
protective booties for your cinebarge!
thingiverse
free
Bullshark Booties by falconmultirotors
...bullshark booties by falconmultirotors
thingiverse
booties for your bullshark with 2.5mm bottom plate! print 2 of each file.
thingiverse
free
Garuda Stretch Booties by falconmultirotors
...garuda stretch booties by falconmultirotors
thingiverse
this is a protective arm guard for the garuda stretch.
thingiverse
free
Babyshark Canopy by falconmultirotors
...rse
the canopy from the falcon multirotors babyshark.
http://falconmultirotors.com/babyshark.html
print in tpu with 100% infill.
thingiverse
free
Featherlight Booties by falconmultirotors
...ltirotors
thingiverse
booties with built-in 1mm motor softmounts for the featherlight 3", 4", and 5" race drones.
thingiverse
free
Garagecrab HS1177 Camera Brace by falconmultirotors
...garagecrab hs1177 camera brace by falconmultirotors
thingiverse
hs1177 camera brace for the garagecrab.
thingiverse
free
Bullshark Fin by falconmultirotors
...nd snap-in fin for the bullshark frame. this fin helps keep your camera protected and makes recovering with turtle mode a breeze.
thingiverse
free
Bannilight Booties by falconmultirotors
...
booties for your bannilight! protect you arms from damage in tough crashes with these booties. be site to print 2 of each side.
thingiverse
free
Raggio AXII Antenna Mount by falconmultirotors
...raggio axii antenna mount by falconmultirotors
thingiverse
an axii antenna mount for your raggio.
1500Mah
thingiverse
free
4S 1500mAh LiPo protection case
...4s 1500mah lipo protection case
thingiverse
4s (acehe fit) 1500mah lipo protection case
infill 50%
thingiverse
free
Acehe 1500mAh 95C Lipo Protection by mich34
...acehe 1500mah 95c lipo protection by mich34
thingiverse
acehe 1500mah 95c protection
thingiverse
free
LiPo battery protector for Infinity 4S 1500mAh by tomfrajer
...its also infity 1300mah, gaoneng 1500mah 120c - all tested.
this is very good printed using colorfabb xt-cf20 or just plain tpu.
thingiverse
free
NITRONECTAR 1500MAH LIPO ARMOR by Kingc5464
...edrone nitronectar 1500mah lipo with removable balance lead (rbl). i haven't printed this yet, but i will be printing in tpu.
thingiverse
free
Battery cover for DINOGY GRAPHENE 2.0 1300mAh and 1500mAh by Olegussh
...m plastic of type flex or rubber.
inside size of the cover:
for 1300mah (lxwxh) - 74x35x25mm;
for 1500mah (lxwxh) - 87x34x25mm;
thingiverse
free
ZMR250 - Batteryholder for Nanotech 1500mAh 35-70C / Yuki 1350mAh 45C by dyson72
...i 1350mah 45c
versions:
one cutout -> nanotech 1500mah 35-70c
two cutouts -> nanotech 1500mah 35-70c and yuki 1350mah 45c
thingiverse
free
Floureon 1500mAh 1s-4s and 6s pad by WhiteTrashFPV
...rse
this is a battery pad for a floureon 1500mah 1s-4s and 6s. this works great. i printed it at 100% scale 100% infill with tpu
thingiverse
free
DNA250 1500mah lipo box by UKDTweak
...mm thick by 3mm by 8mm, n52 magnets, total of 8 required
the 510 hole is 10mm to suit the varitube 510's.
h99.5mm-d28mm-w59mm
thingiverse
free
battery skid for graphene 1500mah by mantamatt1
...t1
thingiverse
remixed to suit graphene 1500 or alike.
longer to protect entire length
centered for better cog
make with tpu 0.2
1300
3ddd
free
KBF-1300
...kbf-1300
3ddd
kraus
cмеситель kraus kbf-1300 придаст ванной комнате элегантный и неповторимый вид
страна производитель: сша
3ddd
$1
VALENTE / ispirato 1300
...valente / ispirato 1300
3ddd
valente
мебель для ванной - valente ispirato 1300
3ddd
$1
Valente Ispirato 1300
...valente ispirato 1300
3ddd
valente
valente ispirato 1300
зеркало_114x15x56
раковина_130x48x52
пенал_35x32x151
turbosquid
$15
human-1300
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Ravak SD Clasik 1300
...ravak sd clasik 1300
3ddd
ravak
ravak sd clasik 1300
3d_export
$5
Winchester 1300 3D Model
...winchester 1300 3d model
3dexport
winchester 1300 3d model kevin 54124 3dexport
turbosquid
$6
Built-in bookcase 1300
...odel built-in bookcase 1300 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1469858)
3ddd
free
Favourite 1300-5PC
...favourite 1300-5pc
3ddd
favourite
модель люстры-вентилятора favourite 1300-5pc. в архиве файлы в 2011 и 2014 версиях и obj-файл.
3ddd
free
Favourite 1300-1W
...avourite 1300-1w
3ddd
favourite
модель настенного светильника favourite 1300-1w. в архиве файлы в 2011 и 2014 версиях и obj-файл.
3d_export
free
1300 watt subwoofer for cars
...1300 watt subwoofer for cars
3dexport
the model is made to take up space in the house or in the car. power 1300 watts.
Lipo
thingiverse
free
Soporte lipo
...soporte lipo
thingiverse
customizable lipo stand
thingiverse
free
Copterframe Lipo Adapter for bigger Lipos by heckmic
...o adapter for bigger lipos by heckmic
thingiverse
copterframe lipo adapter for bigger lipos
look at michael-heck.net for more.
thingiverse
free
Testeur LIPO / LIPO Tester
...testeur lipo / lipo tester
thingiverse
salut a tous ceux qui sont sur cette page !
thingiverse
free
Lipo Taranis
...lipo taranis
thingiverse
pour lipo gn3 taranis
thingiverse
free
Harvest lipo buckle
...harvest lipo buckle
thingiverse
tpu lipo belt. keep out the frame your lipo straps.
thingiverse
free
lipo box by snoupypop
...lipo box by snoupypop
thingiverse
pour lipo 25c 1s
thingiverse
free
Lipo Stand by Cagatay
...lipo stand by cagatay
thingiverse
6x (12x35mm) lipo compartment
thingiverse
free
Lipo cover for bottom slung lipos by Zugara
...s and battery strap width of 20mm. length of 75mm x 30mm wide, 17mm height.
stl is for hollow print, so adjust yours accordingly.
thingiverse
free
boite lipo by micma
...boite lipo by micma
thingiverse
boite pour accu lipo tattu 850mha
thingiverse
free
LiPo Holder for Taranis
... taranis
thingiverse
this is my lipo holder for taranis radios. i use it with 850 mah lipo's, but others may also work fine.
Protector
3d_export
$5
gauge protector
...gauge protector
3dexport
gauge protector
turbosquid
$40
Protector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
hard gauge protector
...hard gauge protector
3dexport
hard gauge protector
turbosquid
$20
Petit Protector
...alty free 3d model petit protector for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1168019)
turbosquid
$29
USB Protector
...free 3d model usb protector for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1407443)
turbosquid
$25
Surge Protector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Archery Arm Protector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Protector M151-M2 model
...lty free 3d model protector m151-m2 model for download as max on turbosquid: 3d models for games, architecture, videos. (1411642)
turbosquid
$25
Iphone 11 Transparent Case Screen Protector
...ent case + screen protector for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1472677)
cg_studio
$59
Kongsberg Protector M151 RWS - Browning M23d model
....lwo .obj - kongsberg protector m151 rws - browning m2 3d model, royalty free license available, instant download after purchase.
Battery
3d_ocean
$2
Battery
...battery
3docean
battery electronic
a high quality battery .
3d_export
free
battery
...battery
3dexport
battery
3d_ocean
$5
Battery
...battery
3docean
battery electronics
a classic 6 v battery, high poly with materials
3d_ocean
$3
Batteries
...batteries 3docean aa aaa batteries battery d electronics energy materials power subdivision uv unwrapped aa,...
3d_export
$19
Lead-acid battery storage battery lithium battery
...ttery storage battery lithium battery
3dexport
1.lead-acid battery storage battery lithium battery 2.files include 3dmax obj fbx
3d_ocean
$7
Battery Model
...battery model
3docean
big battery car battery vehicle battery
car battery, big battery, vehicle battery.
3ddd
free
battery energier
...battery energier
3ddd
battery energier , батарейка
battery energier
turbosquid
free
battery
...battery
turbosquid
free 3d model battery for download as obj on turbosquid: 3d models for games, architecture, videos. (1151676)
3d_ocean
$1
Battery Model
...lack minus plus white yellow
this is battery model is about 1000 triangles. turntable preview is smoothed version of the battery.
3d_export
$10
battery 18650
...battery 18650
3dexport
battery 18650