Thingiverse
12v 360w Psu cover With iec and xt60 connector by chris33
by Thingiverse
Last crawled date: 4 years, 5 months ago
I made this so i could print it low height as my layer cooling fan is not attached to my duplicator and i would not be able to get good layers the taller the print.
Hardware Needed
Iec connector (http://www.maplin.co.uk/p/10a-fused-snap-in-iec-chassis-plug-with-switch-n94cz)
Xt60 Connector (http://www.hobbyking.com/hobbyking/store/__9572__Nylon_XT60_Connectors_Male_Female_5_pairs_GENUINE.html)
16x m3 brass inserts (http://www.ebay.co.uk/itm/100pcs-M3x5mm-L-x5mm-OD-Metric-Threaded-Brass-Round-Metal-Knurl-Insert-Nuts-/221987349724?hash=item33af7a24dc)
16 x m3 x 6mm screws
3x m4 x 6mm screws
Hardware Needed
Iec connector (http://www.maplin.co.uk/p/10a-fused-snap-in-iec-chassis-plug-with-switch-n94cz)
Xt60 Connector (http://www.hobbyking.com/hobbyking/store/__9572__Nylon_XT60_Connectors_Male_Female_5_pairs_GENUINE.html)
16x m3 brass inserts (http://www.ebay.co.uk/itm/100pcs-M3x5mm-L-x5mm-OD-Metric-Threaded-Brass-Round-Metal-Knurl-Insert-Nuts-/221987349724?hash=item33af7a24dc)
16 x m3 x 6mm screws
3x m4 x 6mm screws