Thingiverse
11mm Dovetail Adjustable Rear Sight by Qyuubi786
by Thingiverse
Last crawled date: 4 years ago
This is a rear sight based on the CR700W rear sight. This should easily fit on any 11mm dovetail rail. This should be a good addition to my PP700W front sight silencer adapter
You will need a 1mm knurled pin to hold the blade mount onto the dovetail mount. And two M6 slotted grub screws to adjust the windage. There is a circular notch that should hold a spring for the elevation.
It probably would be best to print this in at most 0.2mm nozzle diameter.
...Ideally it should be machined out of abs and steel for the sight blade.
You will need a 1mm knurled pin to hold the blade mount onto the dovetail mount. And two M6 slotted grub screws to adjust the windage. There is a circular notch that should hold a spring for the elevation.
It probably would be best to print this in at most 0.2mm nozzle diameter.
...Ideally it should be machined out of abs and steel for the sight blade.