Thingiverse
10mm Metal Rod Mounting Bracket for 22L Samla IKEA Dry Box
by Thingiverse
Last crawled date: 5 years, 3 months ago
Yet another Spool feeder. This should be printed x2. There are holes for an optional mount with M3 screws in case you want to mount the brackets on the bottom of the box with something more than 2side adhessive tape.
The adapters host 2 x 10mm rods and can be used for any container as Fillament Spool rotation mount depending on the rods width.
I Use it for the IKEA 22L box.
You will also need 4x10mm bearings (10mm inner - 26mm outer diameter) for each spool you want to host and X4 Prints of the Provided STL Wheels. (1 wheel = 1 bearing)
The adapters host 2 x 10mm rods and can be used for any container as Fillament Spool rotation mount depending on the rods width.
I Use it for the IKEA 22L box.
You will also need 4x10mm bearings (10mm inner - 26mm outer diameter) for each spool you want to host and X4 Prints of the Provided STL Wheels. (1 wheel = 1 bearing)