100th remix for Hypercube X carriage with LM8LUUs by n9jcv

Last crawled date: 3 years, 1 month ago

I have modified the X carriage. I wanted to use LM8LUUs and have full bearing holders. And obviously this means the X axis is using 8mm rod. I have increased the strength and amount of plastic in many areas on the carriage. Especially the belt attachment points. Another change I made was to customize this for my particular endstop. A picture of the endstop is included. I prefer these endstops, as they are dirt cheap and they are smaller than what Tech2C originally used. They are available on ebay and aliexpress.
You have to mod the endstop slightly. Use a drill and drill the screw mounting holes slightly larger to 3mm. If you don't have metric bits, find the closest oversize standard.
The x carriage also has a hole to route the endstop wires thru as seen in the picture.
Use however you like. Original Sketchup files included for you use.