1000 HP Turbo 92-95 drag civic hatch four cylinder build b-series engine solidworks build project pictures only

Last crawled date: 1 year, 11 months ago

check out my highly detailed 3d build of a high powered drag racing outlaw civic!
DOHC VTEC B18C

it has only four cylinders but has a power of more than a 1000 hp because of the large turbo boosting the intake up to 50 psi..

It has a golden eagle sleeved B18c engine block.
B18C BME rods.
81mm forged pistons.
golden eagle 87.2mm stroke crankshaft
B16A Cylinder head
b series valve cover
vtec solenoid.
90mm throttle body.
K-series coil on plug
skunk2 ultra race intake manifold with 2 liter spacer.
forward facing turbo exhaust manifold.
v band exhaust pipe
b series transmission and bell housing.
water to air intercooler
front suspension components (camber, cross member,lower control arms, spindles,disc brakes, axles, cv boots,shocks,steering rack,hub )
Belak front and rear wheels
MH drag slicks and skinnies 26x15x10
intermediate shaft
power-steering brackets
head lights
precision 7285 t4 turbo
tial mvr 44 wastegate
exhaust manifold
t4 divided turbo flange
ID2000 fuel injectors
AN10 AN8 AN6 weld bungs
skunk2 fuel rail
engine mounts
v-band clamps
MAC boost control solenoid
civic eg chassis
and many more to come..

This model is not finished yet, about 50% complete.
I will make the body panels,fuel system, transmission internals in the future.

dimensions are accurate becauseit came from a real civic eg hatch.
i measured the dimensions my self from actual head gaskets,manifold gaskets, etc..
I also have a workshop manual for a 92-95 civic

others are modeled just by pictures from the internet..
about 8 months of work on solidworks 2013 with real view graphics enabled.

I made these models for free.