Thingiverse
-OLD- Mostly Printed CNC -Add On- Corner Blocks by Allted
by Thingiverse
Last crawled date: 4 years, 1 month ago
Old, please use http://www.thingiverse.com/thing:902483
Legs for the CNC.http://www.thingiverse.com/thing:724999
These are 3.75 inches high. I can make just about any size just let me know what you want.
This screws into the corner block with a 6/32x.75 possibly without a locknut. If you do use a locknut, you'll need some needle nose pliers. You could glue or double sided tape them with VHB.
You could also use some 4x4 blocks instead of printing these.
Legs for the CNC.http://www.thingiverse.com/thing:724999
These are 3.75 inches high. I can make just about any size just let me know what you want.
This screws into the corner block with a 6/32x.75 possibly without a locknut. If you do use a locknut, you'll need some needle nose pliers. You could glue or double sided tape them with VHB.
You could also use some 4x4 blocks instead of printing these.