thingiverse

free

Support for Spring Tension Shower Rod by Robert256

...t have to be exact. this support is 4 cm wide, allowing the use of two strips of 19 mm wide two-sided tape to fix it to the wall.

thingiverse

free

Rostock Max Wider Filament Spool Extension Kit by Av8rRC

...kit by av8rrc thingiverse extensions, filament guide and support rod to use filament spools up to 100mm wide on the rostock max.

thingiverse

free

Very Simple Spool Holder/Axle by Archimiedies

...r. layer height 0.3mm, 3 solid layers, 3 perimeter layers, 20% fill, and rectilinear support get the support material out easily.

thingiverse

free

TYCO Super Cliffhanger support by pablocases

.... print 2x things, drill 4mm wide, 15mm deep holes in each end of a 26cm wooden rod and attach the things with glue in each hole.

thingiverse

free

Wide Curtain Rod End by morseman

...ers under the screw heads when attaching to the wall. i did incorporate two braces on the back edge to the side to strengthen it.

thingiverse

free

Prusa MK2 wide spool holder by Angelscry

... guide, or a led support) without the need to reprint everything. arms are fixed to the central bar using 4 m3x30 screws + nuts.

thingiverse

free

Alternative x-z carriage inspired by Cyclone by Fabei

...n a 2080 aluminium profile edit2: added primitive x-carriage, still lacking motor support and another block for the vertical rods

thingiverse

free

Simple Shower Rod Mount by devonwmmb

...n my application. 2016 update. the base doesn't need to be so thick. you can "cut off bottom" to save on filament.

thingiverse

free

Plant support finial by sarbalyd

...igned in fusion360. update : april 2018. i printed in pla and can confirm its lasted a whole season and winter in the uk weather

thingiverse

free

Kapton Dispenser / Applicator by Tig29

...d and squeegee down securely to finish. having tried several methods (including soap film) i am surprised by how well this works.

thingiverse

free

Hypercube evolution extra wide rod 10XY carriage 75mm edge to edge by warham

...but do not believe it will affect the print. supports will be needed for...

thingiverse

free

12mm Rod/ Shaft Support Block, for OpenBeam by RushMoreMods

...total height = 45 mm total width = 15mm supports 12mm smooth rods support hole openings for m3 nut...

3d_sky

free

Lacey Wide Round Black Chandelier

...black finish. the design features support rods that attach the fixture to a black chain that then attaches to the ceiling canopy.

thingiverse

free

Wanhao Duplicator i3 Plus - 71mm Spindle Upgrade by analyzer

...d rod – 120mm 3/8in hex nut – x3 1/2in washer - x1 notes: the nut in the centre of the spindle functions a stabilizer and brake.

thingiverse

free

FIlament Holder by Dudux

...diameter. description of parts: 2 x soporte.stl - side supports 2 x sop_bobina_huecos.stl - supports coil. 2 x tope_roda_c.stl...

thingiverse

free

HICTOP Prusa i3 Upgraded Corners w/ Y-Axis End Brackets by pyr0ball

...er for mounting feet / cube end / whatever. both of these files are for one side of the printer. just mirror print for the other.

thingiverse

free

Tevo Bearing/Rod Holder by Generalx5

...hing:2137515) which provided me dual z mounted on the base of the tevo tarantula, and then i just made this part to work with it.

thingiverse

free

Filament storage system by DarthBane

... into each other (it did not fit in my printer, which is 220mm x 220mm bed, but these 2 pieces do fit in that size, 1 at a time).

thingiverse

free

Robot toilet paper holder by NirDobovizki

...problem with sagging due to bridging. there are also supports below the arms and inside the hands, no additional...

thingiverse

free

Small parts drawer by lcecil

...ed on the linear support rail system. it is not suitable for the older mendel 1.0 designs with 2 support rods for y axis system.

thingiverse

free

Universal Spool Holder by MR2C280

...to add a little rigidity to the unit. the supports and bearings are up high enough that they won't...

thingiverse

free

Customizable Universal Y-Undercarriage / 4x LM8UU / Belt Tensioner / All M3 by FZS1_Fazer

... i've corrected that by uploading a version with the support thickness of 4.9mm as it is in the thing this remix is based on.

thingiverse

free

Wall Scroll Rods by ShiloTheDog

...side which allowed me to print them without any supports i then made decorative plugs or end caps of...

thingiverse

free

Phone tripod mount by maxwfk

...to get the maximum strength out of it. no supports needed after printing: maybe you have to drill out...

thingiverse

free

Universal phone tripod mount by maxwfk

...to get the maximum strength out of it. no supports needed after printing: maybe you have to drill out...

thingiverse

free

Filament Spool Tower by ontherunstudio

... top. this can be adapted for other 3d printers. just cut the round rods approximately 33mm longer than the width of the opening.

thingiverse

free

Lewihe Play spool support by magonegro

...2498http://www.thingiverse.com/thing:1550861 printing intructions: no support required. use at least 30% infill and 4 perimeters.

thingiverse

free

zip-tie lure hook keeper

...at 0.1mm layer height with a 0.4mm nozzle. no supports needed but best printed dead slow. took 28mins to...

thingiverse

free

Vertical Laptop Stand

...hp pavilion laptop. has a central hole for cabling. supports any laptop that is aprox. 31.5 mm wide. you'll...

thingiverse

free

Spool Holder Flashforge 600g spool

...been designed so there is no need to add supports feel free to share and upload photos...

thingiverse

free

Sterilite 20qt Filament Dry Box v2

...330mm 8mm diameter linear rods for the spool roller supports these are the same size as the prusa mk3...

thingiverse

free

90 degree spool holder by vader7071

...pool? slide the mounts closer together and skip the middle mount. designed to stick out the back (or front) parallel to the bed.

thingiverse

free

Simple Birdfeeder for Songbirds by l_d

...a high enough resolution you might get away without supports for the perch rod use something with 10mm diameter....

thingiverse

free

45 Degree Spool Holder by vader7071

...try and shorten the footprint, so i bent the supports at a 45 degree angle to get the spool...

thingiverse

free

Spool Holder (many spool sizes, easy spool exchange) by ambrop7

...n the result: python2.7 /main.py filament_holder.py -o out.scad -s updates: made certain holes octagonal for easier printing.

thingiverse

free

Spool holder by RickSanchez137

..."-20 updates 04/22/15 centering nuts have an updated smaller diameter to fit more spools and legs updated for more support

thingiverse

free

Ultimate Classic Elite Ship Maker

...rod outline. 3: rod outline with added 2nd nozzle supports (work in progress - this is so rods don't...

thingiverse

free

FILAMENT SPOOL SHELF / ÉTAGÈRE BOBINES DE FILAMENT by Goatier

...tiges et peux donc être retirer très rapidement. les supports se fixent avec des vis ø5 mm (2 par...

thingiverse

free

endstop switch mount by Cadfinger

... capture the cap/saddle around the smooth rod. i have found that this makes a rock solid connection, i have not had one slip yet.

thingiverse

free

Cable Port in 60mm Desk Grommet by Zed42

... a long one with several options hence giving more freedom e.g. for shorter cables while maintaining the same overall rod length.

thingiverse

free

Shopping List / Notepad by jmcbassett

...back and it doesn't slide under its own weight now. overall size of the main piece is 200 mm long, 90 mm wide and 60 mm high

thingiverse

free

Anet A8 giant spool holder by doegox

...greater stability the rod is simply laid on the supports no nut required the adapter for 52 mm diameter...

thingiverse

free

Ant Barrier for bee hives by de37421

...threaded rod threads vertically into the hex nut and supports the hive. this hive stand was initially made to...

thingiverse

free

Paracord Spool by echomirage

...infill. if your bridging/overhanging isn't great, you may need supports for the threads: i've included a test file so...

thingiverse

free

Spool Holder - free standing by theamzngq

...infill at 10%. i designed it so that no supports would be needed for printing as well. update: i...

thingiverse

free

Linear bearing made of three bearings by UkIan

...cut out some unneeded bits. fixed some errors where supports didn't reach all the way. added comments to the...

thingiverse

free

Fixed Angle 10 Degree Graphic Tablet Stand by LalinOwl

...like i did with a failed prototype from other project. update 2: added a new/less elegant version with built in anti-tipping leg.

thingiverse

free

2020 Spool Holder

...z-axis lead screw tensioner. none of the pieces require supports and are rigid enough to be printed with low...

thingiverse

free

Y-Motor-Holder by 7eggert

...obj has an additional support against that - hope that helps. tanks to raphael kugelmann for supplying his modified idler holder.

thingiverse

free

X-Y plotter for beginners by WillemvD

...printed with the timing belt slots facing upward. no supports are required. one central m4 bolt connects two identical...

thingiverse

free

Modified and split Z-stage for Ultimaker 2 Aluminum Extrusion 3D printer by dintid

...ase). 1.4) one version of the left and right pieces has 7mm deeper holes for the 12mm rods - holes are still 12.4mm in diamenter.

thingiverse

free

Roller Spool Holder for Prusa i3 by MinorHavoc

...needed: (2) 608 bearings (or 4 for the expandable roller) 7+ inches of 1/4-inch aluminum rod tools needed: hobby knife metal file

thingiverse

free

A602 spool holder by namunlbo

...output size of 200 200 180, but could print only one at a time. please refer. support clip is only a602. it's little tight.

thingiverse

free

Spool roler for spool holder by jmlavoie

...has 2 parts which have very small overhangs, so no support are required. the two parts are pressed together and requires no glue.

thingiverse

free

OmniStand Top Mount Filament Spool Stand by BaronWilliams

...compatible with all omnistand filament stands, rods and spacers supports more filament spools than the original omnistand compatible with...

thingiverse

free

Prusa i3 Mk2s MMU Frame Spool Support (4 Spools) Space Saver by MonkeyTurnip

...petg at 20-40mm/s and its rock solid. inbetween the supports and you can upto 100mm wide spools on the...

thingiverse

free

Spire castle mould by Fothergill

... wall thickness, so that all of the detail could be achieved.setting your 3d printer speed to 50 mm per second should work well.

thingiverse

free

Snapmaker Rotary Attachment by mwhatch

...e sure all rollers stay on contact with the base during use. i am working on a couple of different variations of the roller base.

thingiverse

free

Prusa i3 Pro B Z axis top brackets with blocks for strengthening rods by Bushmills

...and willing to change my opinion if new evidence supports it. for practical considerations, i opt for an agnostic...

thingiverse

free

French Door Refrigerator - Crisper Center Rail Support (W10326469) by bobrocks

...tly, this part is used in many refrigerators. a similar part might even be used... in yours! see if this will prevent any issues!

thingiverse

free

Closed Bearing Block for 1" round unsupported rail by MikeyP

...s welded to the aluminum gantry sides. the main rail passes through both blocks giving very good strength and no measurable slop.

thingiverse

free

lineair slide for xy table by citrofan

...or 10/8 brass bushes 20mm long 1x 608zz bearings 1x m3 30mm screw, m3 nut and 2x m8 nut for the hand wheel 4x m3 screw 15mm

thingiverse

free

FlashForge Dreamer Long Filament Spool Holder by BaronWilliams

...for printing. it's free and very powerful, and directly supports importing and exporting stl files. as requested, i added...

thingiverse

free

Poltur XL 300x200mm Heatbed add-on by shawdreamer

...arts detailed in this thing, all electronics remain the originals used in the printrite diy which was the original donor printer.

thingiverse

free

Spool Hub - 52mm to 8mm by JP1

...include the source file with object units in mm and scene units in inches. the cs file is cura scaled and oriented for printing.

thingiverse

free

Threaded Bearing Holders remixed for Ikea 465+ 10.6L food container drybox by fhb

...center bearings (file pos6). print the center holder with supports because the inner ring is not flush with the...

thingiverse

free

Anycubic Kossel Linear Plus E3D V6 Effector by Old-Steve

...inted these in abs with 50% infill. effector 2640121 carriages 2653647 fan shroud 2846998 ubl adapter 2847002

thingiverse

free

Filament Spool Holder by amiliv

...snugly they can extend past bearings and rub against supports any metal material should do (e.g. stainless steel, aluminum,...

thingiverse

free

MPCNC leg leveler, stiffener and large table support by cmidgley

...pload a new set of stl files. if only thingiverse would support fusion 360 parametric designs, then you could do it yourself...!

thingiverse

free

Extended spool holder for Prusa i3 MK2 by X3T

...th the flat side in the hole on the arm. put the peg into the hole on the rod with the head facing up, on the outside of the arm.

thingiverse

free

3D Print Boiliemachine 15mm

...tl 18mm right.stl 18mm ring.stl opt2-cap.stl (2x) ( this boilie machine is brought to you by https://www.boiliemix-berekenen.nl )

thingiverse

free

Conical Spool Adapter by gustavodenobi

...nts to tweak it a little bit. for the printing, i used a 0.6mm nozzle with 0.3mm resolution, 2 vertical shells and 20-30% infill.

thingiverse

free

Wanhao i3 Z-axis bearing block by retrofluffyboy

...y a matter of bolting the top back onto the printer and checking that the z-axis moves up and down freely without any resistance.

thingiverse

free

Anycubic i3 Mega Hemera mount for up to 9mm belts

...www.thingiverse.com/thing:4127878 for the design i used this great model of the hemera: https://www.thingiverse.com/thing:4025946

thingiverse

free

Conical Spool Holder - Notchless by DMCShep

...conical shape ensures a wide array of fitment. zero supports needed due to design, so single extruder friendly! if...

thingiverse

free

Antiwobble Z 5mm Anet A8 and P3Steel (only V5) by SanT82

...holes for the m3 nuts have been enlarged to 2.50mm compared to the 2.41mm they had, i like to hide the nut a little more. regards

thingiverse

free

Modified Prusa I3 single motor Z mod complete by Unknown

... motor plate is what also holds the right z smooth rod. but the cutout allows for locknuts to rotate with the 5mm threaded shaft.

thingiverse

free

Waving Mechanism for Stage Prop, Decoration, Moving Sign, etc. by SteveJohnsen

...ondering, the photo with the actual assembly is only an ugly mock-up arm that i quickly cut out of core board for prototyping. :d

thingiverse

free

Hobbyhorse wall-mount holder by vapefreak

...fect adhesion like with the blue tape! look at this: 200mm kapton tape: http://amzn.to/2npggqi have fun! (amazon affiliate links)

thingiverse

free

Wanhao Duplicator I3 V2 Spool holder by micky0909

...i3 v2 and in such a way that no supports are needed. can be printed in one go on...

thingiverse

free

PrntDGW by DavidWalker

...roughly 0.5mm on, so they are rounded. my idler bearings/supports are poor and not entirely vertical which could be...

thingiverse

free

Solder paste stencil holder + PCB holder by wingmaster

...e let me know if it works for you. and give me some $$$ tips....that is a good incentive for me to publish more designs you like!

thingiverse

free

VitaMATS by Tertiary

...requires a solid knowledge of how to print with supports mate printed parts together, use of vitamins such as...

thingiverse

free

A8 X-axis tensioner (remix^2) by aw_

... the layer adhesion is a serious weakness in this design. please consider the remix^3 above, which is still working well for me.

thingiverse

free

SCX24 Trailer by jspadaro

...h 20% infill and 6x perimeters for strength. may not be necessary. bed sides haven't been tested yet, it's a long print.

thingiverse

free

Anet A6 Large Top Spool Holder by BrienAllison

...gap for the holder can vary by sliding the supports inwards and outwards. the maximum span is 172mm and...

thingiverse

free

Double Fairlie locomotive in 7mm scale / 0-16.5 by caderifor

...sional accuracy is not claimed for this design. photos of assembled loco promised asap. chassis modifications pix added 30/12/20

thingiverse

free

Affordable Open Source Belt 3D-Printer by hubinio

....de/dp/b00i8nhq4o/ref=cm_sw_em_r_mt_dp_u_.s1qbbyj7k1e2). this should be the cheapest and easiest to source material for the belt.

thingiverse

free

Bi-Toob RC Plane Printed Parts + Build Description by Goodsons_Hobbies

...of each file, and 4 of the optional hole supports electronics used (for reference, this can surely use a...

thingiverse

free

Zamperla Giant Discovery Model by TinyRides

... paint the model or leave it whatever color it was printed in. 16) enjoy! if you have any questions don't hesitate to ask. :)

thingiverse

free

K40 Laser Motorized Z-Bed by quintesse

... i don't mind so much, i don't plan on using very thick materials. more exact instructions will be added at a later date!

thingiverse

free

Succulent Wall Plant Holder by Killerwaffles

...the top to help balance the weight between both supports feel free to reach out if you have any...

thingiverse

free

Bottle cage for camper by Zefram_Cochrane

...l fire extinguisher in camper vanbottle cage for camper i would be very happy about a tip. ceterum censeo martem esse abeundum.

thingiverse

free

Narrow Gauge Powered Bogie Set by BouncyMonkey

...eak-off bits on a couple of the motor components. the filenames include the number of times you will need to print of each bit.

thingiverse

free

Prop Balancer by Powerman3d

...from the top of the hole. print with no supports ...

thingiverse

free

Convenient Spool Holder and filament guide for Prusa i3 mk2 by TheChrisP

...gn, so far the tests are good, but i will probably make some additional fine tuning later and add a version for m6 threaded pole.

thingiverse

free

Quick Change Universal Spool Holder by Foreverwinter

...608 bearings designed with printability in mind - no supports required changing the spool is a breeze as it...

thingiverse

free

DJI Mavic iPad Microphone Stand Holder Adapter by TwinPilot

...t before putting your expensive ipad on top of it. use it at your own risk and feel the huge difference of a huge screen. enjoy,

thingiverse

free

Replacement valve part for The Source 51877 Air Powered toy car kit by carlthingy

...be a challenge. could print in one piece with supports but would need significant clean-up. not recommended to print...

thingiverse

free

Chevy V8 1/10th "Erics" by Mindless

...ou don't,, i set mine to 0.5mm which worked fine all the credit goes to eric for this engine ,,, sorry for the shitty photos

thingiverse

free

Heat bed & Z axis mod by Scanjo

...of the top 3 screws. i printed everything with supports you may not need them but that's your call....

thingiverse

free

1:24 Scale Powered Bogie Set by BouncyMonkey

...eak-off bits on a couple of the motor components. the filenames include the number of times you will need to print of each bit.

thingiverse

free

Replacement parts for Hobbyking Slow Stick by Fenixer

...fiber spar. everything is designed to be printed without supports if you orient it properly. list of parts motor...

thingiverse

free

IKEA Samla 45l box filament storage by Dreamcazman

...of the rods, the holders are now used as supports to hold the spools up. if you have thinner...

thingiverse

free

Alu reprap by larsie

...belt, but it remains to be seen. the design supports a printrbot-type y-belt if you want to use that...

thingiverse

free

Combined Remix of Dan0nator's Halo Pistol and MTriron slide with resized mags by guitartoys

...so they would be really smooth on my glass bed. pla print, 2 shells, 20% fill files are oriented in the manner i printed them.

thingiverse

free

3D-printed Electric OFO Bike Mod by RCConcepts

...5mm), hammer, hand-held electric rotary tool with grinding disc, some cling-wrap plastic to protect motor magnets from metal dust

thingiverse

free

Anet A8 - X Belt Tensioner - all m3, with support for long screws and toothed idler by mer2329

...e is still too much friction put 2 washers on, if still too much friction then put a drop of 3-in-1 tool oil between the washers.

thingiverse

free

Audio Technica ATH-M40X Headphone hinge replacement by taitywaity

...(well except for the other side ;)) printing: no supports needed for any parts, 2mm wall shell and 1mm...

thingiverse

free

Oranj Reprap Prusa i3 3D Printer

...er of holes 40cm bed: n/a (cant find, use glass and silicone heat pad) 50cm bed: n/a (cant find, use glass and silicone heat pad)

thingiverse

free

Geeetech i3 Clone V2 - Full modification by valand70

...the lower center vertical plate where the z motors supports are fixed on. the mounts for z motors do...

thingiverse

free

Spool Dispenser System by dmarkdw1955

... enters the extruder on your printer. if you have a cr-10 you can print the filament sensor mount that i uploaded, thing:2826970.

thingiverse

free

OneUp EDC Adapter - Stan's Dart Tire Plug Tool Mini - v1.3 by qwertyphile

...required. https://www.amazon.com/uxcell-carbon-fiber-airplane-matte/dp/b07p95s8f7/ref=sr_1_1?dchild=1&keywords=b07p95s8f7&qid=1616886453&sr=8-1 print settings printer: markforged x7 rafts: no supports no resolution: 0.050mm infill: solid filament brand: markforged filament...

thingiverse

free

MicroRos v1.0 by rosario3dprt

...er (now is really horrible to see like other prototype with all cable everywhere) and some fine tuning to raise printing quality.

thingiverse

free

Simple adjustable slider clamp for He3D K200, K280 and similar kossel deltas by Nanocube

...- this is a updated design with thicker pin supports and 4mm more adjustment travel. models are provided for...

thingiverse

free

Gavtech™ Dual Drive Bowden Extruder v1.1 by FerociousDesigns

...is probably best for the gears at least. use supports touching buildplate only for the main body, i also...

thingiverse

free

Core-T Printed Wheels All Axis Spectra Driven by runninfarmer

...www.thingiverse.com/thing:31216 current frame volume is 350mm x 350 mm x 350 mm. build volume is about 175 mm x 250 mm x 330 mm.

thingiverse

free

Nintendo Switch Case Anker PowerCore 20100+ Modification by bacree

...immer ones at the bottom near the zipper, thicker ones at the top near the case hinge. the third goes just above the lift cutout.

thingiverse

free

Modular Mounting System by HeyVye

.... 15/10/20 - updated holder for phone clamp so it can swap orientation. 18/10/20 - new m5 knobs. more tolerance on phone clamp.

thingiverse

free

Customizable cable organizer for shelves by valand70

...ss filament extruding machine - ebay -filament extruding machine - aliexpress pellets for extruding machine aliexpress coupon