Thingiverse
Holiday Prusa Mendel by kliment
by Thingiverse
Last crawled date: 2 years, 11 months ago
Final update: I have uploaded the source scad and DXF files, and an archive with all the STLs, including the improved ones by nicholasclewis (thank you!). I lost some of the source files for the first models by accident, and the bunny idler was not made in OpenSCAD, and I don't have the source for models made by others, but most of them are there. Have fun building, and don't forget the contest!
Starting today, December 2nd, I will upload a new STL each day. Print one per day and you'll have a Prusa Mendel (with extruder) on the 24th. The prints that take longer are on the weekends, with shorter ones during the week. Some of the parts are special holiday-themed. I'll try to arrange them so you can build as much as possible with the ones you already have. All of these will fit on a normal Makerbot build platform. For more information on the Prusa Mendel, see http://www.reprap.org/wiki/Prusa_Mendel
For the source code for the models, see https://github.com/prusajr/PrusaMendel
Superlative update! Ruben (sikko on IRC) of ikmaak.nl is organizing a contest for everyone who is printing this. The best resulting printer gets a free set of electronics, and the runner-up gets free filament. So if you are printing this, check http://ikmaak.nl/eenblog/2010/12/06/the-holiday-mendel-build-contest/ for the contest details.
The STL for 02. December is now available.
It's a Wade extruder idler by nophead, http://www.thingiverse.com/thing:3462
The STL for 03. December is now available.
It's three of the universal rod clamps that you need for the Y and Z axes.
The snowflakes are from http://www.thingiverse.com/thing:1321
You can hang them from your frame top bars if you like.
This is the Prusa Mendel bar-clamp part.
The STL for 04. December is now available.
If you can have a vertex with a foot...
then why not have a vertex...with a boot!
This part is equivalent to frame-vertex-foot in the Prusa Mendel
The STL for 05. December is now available.
The irregularly shaped hole on the y motor bracket just got more regular.
This is equivalent to the y-motor-bracket
The STL for 06. December is now available.
Courtesy of GregFrost, we have a decorated vertex that proudly proclaims the name of the remix's designer. Print as it is, and don't worry about the missing bits on the first layer - they're there on purpose.
This is equivalent to the frame-vertex.
The STL for 07. December is now available.
For all of you who were waiting for the other shoe to drop - here it is.
Should print better than the one before - less of the boot is hanging in the air.
This is equivalent to frame-vertex-foot.
The STL for 08. December is now available.
This is a tree-star vertex. While the front of your bot has boots, why not have something nice for the back too?
This is equivalent to frame-vertex-foot.
Once you've printed this part you are ready to assemble one of the frame triangles. Take this part and the one from the day before it, and the crown vertex, and follow the instructions on the wiki page linked above.
The STL for 09. December is now available.
We've already got bar-clamps, why not star-clamps?
Sadly the thumbnail does not show the most interesting bit.
This is the Prusa Mendel bar-clamp part.
The STL for 10. December is now available.
Another lovely vertex by GregFrost. Print as it is, and don't worry about the missing bits on the first layer - they're there on purpose and spell out the model name.
This is equivalent to the frame-vertex.
The STL for 11. December is now available.
Another tree-star vertex.
This is equivalent to frame-vertex-foot.
You can now build the entire frame! Have fun!
The STL for 12. December is now available.
It's a gift and motor holder. It holds your z motor and a bunch of gifts - and anything else you put on it. Using clothbot's parametric LEGO buttons at http://www.thingiverse.com/thing:1005 makes this part LEGO-compatible.
This is equivalent to z-motor-holder.
The STL for 13. December is now available.
Since the LEGO bits from yesterday turned out so popular, here's more of that.
Four belt clamps, two rod clamps, two bar clamps. Enjoy!
(There was an error in this file. If you downloaded it before this message appeared, please download it again. If you already printed it, you will need to reprint it. Sorry! My mistake!)
The STL for 14. December is now available.
These are the prusa bushings. They work best if printed in PLA, so if you have access to PLA, use that for this part.
These are the bushings for all three axes.
The STL for 15. December is now available.
These are pulleys for the X and Y axes. Use the shooting star pulley on the X axis, and the other on the Y.
You can now build the entire Y axis.
The STL for 16. December is now available.
This is a quiet little street behind a purring Z axis motor.
This is equivalent to z-motor-holder.
The STL for 17. December is now available.
Two little trees to hold your leadscrews in line.
This is equivalent to coupling.
The STL for 18. December is now available.
tbuser's lovely scanned gnome http://www.thingiverse.com/thing:4693 finds its way back to the real world, guarding your x axis motor.
This is equivalent to x-end-motor.
The STL for 19. December is now available.
I was so impressed when the Stanford bunny appeared on thingiverse as http://www.thingiverse.com/thing:3731 and immediately printed 4.
This one will sit on your idler and watch your prints for you.
This is equivalent to x-end-idler.
Now you have all the parts you need to build the X axis and attach it to the Z axis.
The STL for 20. December is now available.
It's an x-carriage...with a beard. More on this theme later.
You can now attach the bushings and belt for the X axis.
The STL for 21. December is now available.
This is the small gear for a Wade's extruder - with a candy cane on top.
The STL for 22. December is now available.
This is the body of Wade's extruder, only with a hat!
(could you, would you, with a hat?)
The STL for 23. December is now available.
This is the large gear for the the Wade's extruder. It's meant to look pretty cool with the other extruder parts and the bearded carriage.
Moustache profile from http://www.thingiverse.com/thing:4626
You can now assemble the entire extruder.
The STL for 24. December is now available.
These are the endstop holder sleighs.
Racing through the bed.
On a one-stop open axis.
Who will reach it first...
At G28.
You can now assemble the entire printer. Tomorrow, you get OpenSCAD source and a zip of all the models.
Starting today, December 2nd, I will upload a new STL each day. Print one per day and you'll have a Prusa Mendel (with extruder) on the 24th. The prints that take longer are on the weekends, with shorter ones during the week. Some of the parts are special holiday-themed. I'll try to arrange them so you can build as much as possible with the ones you already have. All of these will fit on a normal Makerbot build platform. For more information on the Prusa Mendel, see http://www.reprap.org/wiki/Prusa_Mendel
For the source code for the models, see https://github.com/prusajr/PrusaMendel
Superlative update! Ruben (sikko on IRC) of ikmaak.nl is organizing a contest for everyone who is printing this. The best resulting printer gets a free set of electronics, and the runner-up gets free filament. So if you are printing this, check http://ikmaak.nl/eenblog/2010/12/06/the-holiday-mendel-build-contest/ for the contest details.
The STL for 02. December is now available.
It's a Wade extruder idler by nophead, http://www.thingiverse.com/thing:3462
The STL for 03. December is now available.
It's three of the universal rod clamps that you need for the Y and Z axes.
The snowflakes are from http://www.thingiverse.com/thing:1321
You can hang them from your frame top bars if you like.
This is the Prusa Mendel bar-clamp part.
The STL for 04. December is now available.
If you can have a vertex with a foot...
then why not have a vertex...with a boot!
This part is equivalent to frame-vertex-foot in the Prusa Mendel
The STL for 05. December is now available.
The irregularly shaped hole on the y motor bracket just got more regular.
This is equivalent to the y-motor-bracket
The STL for 06. December is now available.
Courtesy of GregFrost, we have a decorated vertex that proudly proclaims the name of the remix's designer. Print as it is, and don't worry about the missing bits on the first layer - they're there on purpose.
This is equivalent to the frame-vertex.
The STL for 07. December is now available.
For all of you who were waiting for the other shoe to drop - here it is.
Should print better than the one before - less of the boot is hanging in the air.
This is equivalent to frame-vertex-foot.
The STL for 08. December is now available.
This is a tree-star vertex. While the front of your bot has boots, why not have something nice for the back too?
This is equivalent to frame-vertex-foot.
Once you've printed this part you are ready to assemble one of the frame triangles. Take this part and the one from the day before it, and the crown vertex, and follow the instructions on the wiki page linked above.
The STL for 09. December is now available.
We've already got bar-clamps, why not star-clamps?
Sadly the thumbnail does not show the most interesting bit.
This is the Prusa Mendel bar-clamp part.
The STL for 10. December is now available.
Another lovely vertex by GregFrost. Print as it is, and don't worry about the missing bits on the first layer - they're there on purpose and spell out the model name.
This is equivalent to the frame-vertex.
The STL for 11. December is now available.
Another tree-star vertex.
This is equivalent to frame-vertex-foot.
You can now build the entire frame! Have fun!
The STL for 12. December is now available.
It's a gift and motor holder. It holds your z motor and a bunch of gifts - and anything else you put on it. Using clothbot's parametric LEGO buttons at http://www.thingiverse.com/thing:1005 makes this part LEGO-compatible.
This is equivalent to z-motor-holder.
The STL for 13. December is now available.
Since the LEGO bits from yesterday turned out so popular, here's more of that.
Four belt clamps, two rod clamps, two bar clamps. Enjoy!
(There was an error in this file. If you downloaded it before this message appeared, please download it again. If you already printed it, you will need to reprint it. Sorry! My mistake!)
The STL for 14. December is now available.
These are the prusa bushings. They work best if printed in PLA, so if you have access to PLA, use that for this part.
These are the bushings for all three axes.
The STL for 15. December is now available.
These are pulleys for the X and Y axes. Use the shooting star pulley on the X axis, and the other on the Y.
You can now build the entire Y axis.
The STL for 16. December is now available.
This is a quiet little street behind a purring Z axis motor.
This is equivalent to z-motor-holder.
The STL for 17. December is now available.
Two little trees to hold your leadscrews in line.
This is equivalent to coupling.
The STL for 18. December is now available.
tbuser's lovely scanned gnome http://www.thingiverse.com/thing:4693 finds its way back to the real world, guarding your x axis motor.
This is equivalent to x-end-motor.
The STL for 19. December is now available.
I was so impressed when the Stanford bunny appeared on thingiverse as http://www.thingiverse.com/thing:3731 and immediately printed 4.
This one will sit on your idler and watch your prints for you.
This is equivalent to x-end-idler.
Now you have all the parts you need to build the X axis and attach it to the Z axis.
The STL for 20. December is now available.
It's an x-carriage...with a beard. More on this theme later.
You can now attach the bushings and belt for the X axis.
The STL for 21. December is now available.
This is the small gear for a Wade's extruder - with a candy cane on top.
The STL for 22. December is now available.
This is the body of Wade's extruder, only with a hat!
(could you, would you, with a hat?)
The STL for 23. December is now available.
This is the large gear for the the Wade's extruder. It's meant to look pretty cool with the other extruder parts and the bearded carriage.
Moustache profile from http://www.thingiverse.com/thing:4626
You can now assemble the entire extruder.
The STL for 24. December is now available.
These are the endstop holder sleighs.
Racing through the bed.
On a one-stop open axis.
Who will reach it first...
At G28.
You can now assemble the entire printer. Tomorrow, you get OpenSCAD source and a zip of all the models.
Similar models
thingiverse
free
Quantum Prusa Mendel - with iOS Assembly Instructions App!!! by DrBlackAdder
...s not easy to knock out of adjustment now!
stronger x carriage idler-end
stronger rod clamps (still need to be even stronger)
thingiverse
free
z-axis motor clamp by daanvanderkolk
...ngiverse
connection part for the z-axis motors on a prusa mendel i2.
fits on the motor with the 5mm axle and the m8 linear lead.
thingiverse
free
Integrated Z motor mount, frame vertex, rod clamp and reel holder for Prusa Mendel by Magician
...com/thing:15224
decided to add the reel holder supports to the motor mount and design my own top section to hold the 608 bearing.
3dwarehouse
free
Prusa Mendel V2 - Frame Vertex Foot
...prusa mendel v2 - frame vertex foot
3dwarehouse
prusa mendel v2 - frame vertex foot
thingiverse
free
Test Tube Mendel by bryanandaimee
...thinking the x motor mount and idler will be similar to prusa's but backwards and possibly upside down since...
thingiverse
free
Prusa Filament Spool Holder by makerswamp
...s that screw into the z-motor-mount.
i haven't tested this yet so if you want to print one and post pics that'd be great!
thingiverse
free
Extruder Idler Bracket by timschmidt
...acket for wade's geared extruder. part of the mendel openscad re-work being done here: http://www.thingiverse.com/thing:3118
grabcad
free
Parts for Prusa i3 mk2s
...
parts carefully extracted from stl files from prusa's website.
very accurate.
x-carriage is missing the cable holding part
thingiverse
free
Dual Mendel X Carriage a la Prusa by vik
...ided in the design.
two pinch extruders http://www.thingiverse.com/thing:8830 or one wade extruder can be fitted to the carriage.
thingiverse
free
new construction of wade extruder for prusa mendel by autorobotics
...ch?v=msgouvqe9mw
you can find a complete step-assembly on grabcad:https://grabcad.com/library/new-construction-of-wade-extruder-1
Kliment
3d_export
$20
KV2 3D Model
...kv2 3d model 3dexport kliment voroshilov kv ii soviet russian ussr ww world war...
archive3d
free
Tank 3D Model
...tank 3d model archive3d tank armoured fighting vehicle kliment voroshilov tank kv-85 tank kv-85 n260816 - 3d model...
turbosquid
$5
KV-2Kliment Voroshilov - 2
...kliment voroshilov - 2) for download as ma, dxf, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1160884)
turbosquid
$120
Kliment Voroshilov KV-2 Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Tank KV-1 (Kliment Voroshilov) low poly
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$99
Tank Kliment Voroshilov KV-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$75
Tank KV-2 (Kliment Voroshilov 2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
UFS-095 E-step Calibration Ruler - Larger Letters by UncleFrankSays
...to read the current e-step. here is a helpful link.https://github.com/klimentprintrun/issues/1021 ...
thingiverse
free
Medical-grade stethoscope v2.0 by Tareko
...including alex pavlosky, jennifer glauche, spencer chambers, mahmoud al-alawi, kliment yanev, carrie wakem, shaker shaheen, mohammed khdair, mohammed abu...
Mendel
thingiverse
free
x carriage for RepRapPro Mendel to support extruder mounts with holes for bolts 23mm apart. by RemoteFlyer
...on't reach the endstop switch.
the cover holds the belt in place and has an extension to activate the x axis endstop switch.
thingiverse
free
Mendel max 1.5 y axis shuttle for bmg x2 dual extruder by jimbob6
...ual extruder by jimbob6
thingiverse
this is a y-axis shuttle for upgrading your mendel max with a bondtech bmg x2 dual extruder.
thingiverse
free
30mm fan shroud mendel max bmgx2 by jimbob6
...ndel max bmgx2 by jimbob6
thingiverse
this is a fan shroud for a 30mm fan on the mendel max with a bontech bmg x2 dual extruder.
thingiverse
free
Support finecorsa asse X Anycubic i-mega s by angeloblu80kr
...meccanico con indicatore led e cavo per makerbot prusa mendel reprap mega 2560 1280 cnc arduino ramps 1,4) -il...
thingiverse
free
Monoprice Mini Bed Upgrade by TinyBoat
...this, as well as the z-spacer i used. belt: https://www.ebay.com/itm/timing-belt-gt2-16t-5mm-bore-pulley-5-meters-for-3d-printer-reprap-prusa-mendel254349190668?sspagename=strk%3amebidx%3ait&_trksid=p2060353.m2749.l2649 hardware kit: https://www.amazon.com/gp/product/b07fcn64hv/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1 glass bed: https://www.amazon.com/gp/product/b071rs7db2/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1 z-spacer (really any...
thingiverse
free
CNC gantry from Mendel i2 parts by NilsR
...gn of the carriages for proper belt clamping is needed. at this stage it could probably be used for a small laser as an engraver.
thingiverse
free
Toyota MR2 SW20 1:28/1:10 RC body shell 98mm/102mm/190mm for touring, drift, miniz, openz cars by CatOnCrack
...the mr2's wing). model was printed on a prusa mendel i2 stickers were printed on my sisters hp sprocket...
thingiverse
free
Ender 3 Bowden Tube Filament Guide for Top Mount Extruder by ubergeeknz
...top rail of ender 3 or similar v rail mendel style printers, providing a filament guide for rear/side mounted...
thingiverse
free
Prusa Mendel - NEMA17 Extruder MK7 Support by MauHilst
...
stl to print / use and modifications for mk7 chinese kit
change 3 screws and remake red arm holes for bearing
look the photos ;)
thingiverse
free
OSC/Mendel Filament Reel Guard by Migwans
...u. it threads through the center of the filament reel, then the arrow tips fit through the small holes in the top of the guards.
Holiday
3d_export
$6
A holiday package box 3D Model
... 3d model
3dexport
box package holiday christmas gift present bow bow-knot
a holiday package box 3d model school73 90922 3dexport
3d_export
$80
Airport check in 3D Model
...hall suitcase carousel claim airplane ticket departure arrive trip holiday journey vacancy people crowd metal detector airport check in...
3d_ocean
$5
Donut Balloon
...color deco dessert donut float floating friend globe happy holiday homer kid meat party shape simpson sky up valentine...
3d_ocean
$5
Gift Boxes Christmas
...christmas clause deco decoration garland gift gifts globe happy holiday home interior light new present ribbon ribbons ring snow...
3d_ocean
$2
3D Christmas tree
...3d christmas tree 3docean christmas decembre green holiday merry new red tree year nice and simple style...
3d_ocean
$5
Flower Balloon
...balloon color deco float floating flower friend globe happy holiday party shape sky up valentine - preview image rendered...
3d_ocean
$4
New Year
...print 3dsmax blender c4d celebration season gift christmas decoration holiday maya merry new new year obj winter xmas year...
3d_ocean
$5
Flat Sand Seamless Texture
...texture 3docean beach desert dune flat game gaming ground holiday island land landscape lumpy oasis ocean pebbles photo real...
3d_ocean
$9
Realistic Hand Bell
...bell 3docean bell bells celebrate chime christmas gold handbell holiday music new ornament ring santa school season winter xmas...
3d_ocean
$4
New Year
...print 3dsmax blender c4d celebration season gift christmas decoration holiday maya merry new new year obj winter xmas year...
Prusa
3d_export
$30
geisha by jonathan adler
...** i did a 3d printing test in the prusa software, you can find it among the attached images.<br>exchange:<br>.blend...
3d_export
free
prusa i3 mk3s laser mount for opt lasers
...to learn more about the blue laser technology that conceived the cutting and engraving laser heads from opt lasers, please visit:
turbosquid
$2
Frame Filament Guide Clip-On for Prusa Mk3
...rame filament guide clip-on for prusa mk3 for download as stl on turbosquid: 3d models for games, architecture, videos. (1634730)
turbosquid
free
Prusa small printer adapter holder
...er for download as ipt, skp, dwg, dxf, fbx, ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1642936)
thingiverse
free
Prusa i3 Nema17 Extruder Motor Heatsink Clamp by Revenson
...he heatsink.
pictured are standard 40x40mm aluminum heatsinks with thermal adhesive: https://www.amazon.com/gp/product/b07d4fvc61
thingiverse
free
Prusa Bear Mounted 5 x PTFE Holder by simpsqo
...by simpsqo
thingiverse
this is a mounted ptfe guide for mmu2 5 tubes that allows securing the tubes and under the desk filaments
thingiverse
free
Zohd Dart 250g Micro Cam Mount by derEnCh
...if you like to do adjustments. printed on a prusa i3 mk3 with 0,2mm layer and no support. please...
thingiverse
free
Raspberry Pi 3B+ case for mounting on top of the Prusa Mk3S by PoRD
...rusa mk3s by pord
thingiverse
grand and eloquent thingiverse scrollers!!!
behold my remix of a raspberry pi cae fir the prusa!!!
thingiverse
free
Planetary Phone Stand by amasraff
...when doing a "test print.stl", enable "detect bridging parameter" (prusa slicer) to simulate the real print use support enforcer...
thingiverse
free
roll holder by spartano83
...or wet wipes amazon basic print profile by default prusa slicer, i recommend turning off the base for the...