Water Wheel 3d model
3dmdb logo
Cults
Water Wheel

Water Wheel

by Cults
Last crawled date: 6 years, 1 month ago
- made for my son, who loves to play with any kind of water outside
- wheel is designed to spin around a stationary axle/rod. The flange parts need to rotate freely around the rod
- axle/rod can be held up by a bucket, or with some twigs as shown in the pictures, or just placed on some stones if you play with this on a little creek
- I glued some matching washers onto the axle to keep the water wheel fixed in axial direction
- the wheel is light, uses little material but is still stiff enough for play purposes
- main body consists of 2 parts
- I prepared some axle/rod flanges for 8;10;12 mm and 1/2"; 3/8" diameters
- parts need to be glued together
- outer diameter roughly 185 mm, so it should fit on most build plates easily
- have fun :D
- model units are [mm]

Tags